How to Make Solar Cell in Home

Reviewed by Anne Schmidt

Last Updated: October 16, 2024 Fact Checked

Solar energy is one of the fastest growing alternative energies in the world. Though building an entire solar panel takes a degree of skill and patience, even a beginner can apply the same principles to create a small solar cell. This is a great way to learn about the properties of solar panels. All you need to do is get a little titanium dioxide, build the cell, and use it to turn light into electrical current.

Creating a DIY Solar Cell

Extract titanium dioxide from donut powder.
Add ethanol to the titanium dioxide.
Coat a pane of conductive glass in the solution and cure it.
Coat a second pane with graphite.
Press an electrolyte solution between the 2 panes.

Part 1

Part 1 of 3:

Obtaining Titanium Dioxide

Download Article

Buy a bag of white powdered donuts. The powder contains a chemical called titanium dioxide (TiO ₂ ). Titanium dioxide is a useful material for creating solar cells. ^{[1]
X
Research source}
2
Dissolve the sugar. Unfortunately, the titanium dioxide you get from a powdered donut will be not be pure. It will be mixed with sugars and fats. To remove the sugar, stir the powder into warm water and then pour it through a filter (a coffee filter will work fine). The sugar will dissolve in the water and pass right through the filter. The solid left behind is a mixture of titanium dioxide and fats. ^{[2]
X
Research source}
- Use roughly one cup of water for every five donuts.
Advertisement
The fats are not water soluble, and so they remain mixed with the titanium dioxide after filtration. Fortunately, it is quite easy to remove them. Put the powder on a heat safe dish and bake it at 500 °F (260 °C) for about three hours. This will vaporize the fats and leave behind a titanium dioxide powder. ^{[3]
X
Research source}

Part 2

Part 2 of 3:

Creating a Solar Cell

Download Article

1
Use conductive glass. Most conductive glasses are coated with an indium tin oxide residue. This allows the surface of the glass to conduct electricity rather than insulate it. You can buy conductive glass online or at a solar supply store.
- This glass is usually found in 1x1in (2.54x2.54 cm) squares.
2
Make a titanium dioxide solution. Add ethanol to your titanium dioxide in a glass beaker and stir. You should use the most pure ethanol you can find. Two hundred proof lab grade ethanol is best, but vodka or Everclear will work in a pinch. ^{[4]
X
Research source}
- Use about one milliliter of ethanol per donut and shake or stir the solution in a glass or beaker.
3
Coat the glass. Put a layer of tape around three sides of the glass. This will help you control the depth of your coating. Use a dropper or pipet to drop a small amount of the titanium dioxide solution onto the surface of the glass. Use a microscope slide to scrape the excess liquid off, leaving just a thin coating. Repeat this process ten times. ^{[5]
X
Research source}
- Each drop should be sufficient to coat the glass one time with a thin film. In total, you will use ten drops to form ten layers of titanium dioxide.
4
Cook the solar cell. Put the solar cell into a clear, heatproof beaker or dish. Place the container on a hotplate (or place the solar cell directly on the hotplate). Turn the hotplate on and cook the cell for 10-20 minutes. ^{[6]
X
Research source}
- You will have to watch the cell closely. It will turn brown, and then back to white. When the cell goes back to its original white color, this means that the organic solvents (the ethanol) have burned off, and the cell is finished heating.
5
Stain the cells with tea. Teas contain organic compounds known as anthocyanins. These compounds are good at capturing light in the visible spectrum. Brew a cup of herbal tea and submerge the solar cell for a few hours. Darker teas, such as hibiscus, work best. This will stain the cell and allow anthocyanins to bind to the surface of the cell. The cell is now capable of capturing visible light. ^{[7]
X
Research source}
- Prior to staining, the cell could only capture light in the UV spectrum.

Part 3

Part 3 of 3:

Generating a Current

Download Article

This peice of glass will act as a counter-electrode. You can use a regular graphite pencil. Just rub the tip of the pencil over the glass until it is fully covered with the graphite residue. ^{[8]
X
Research source}
You can cut a thin plastic spacer to put between the pieces of glass. The spacer should go on the clean side of the glass (opposite the tea or graphite side). Alternatively, you can put tape around the edges on the clean side of the glass to form a spacer. This keeps the glass ever so slightly separated. ^{[9]
X
Research source}
An iodine solution is an ideal electrolyte. You can get it over the counter at most pharmacies. Mix the solution in a 3:1 ratio with alcohol. Put one to two drops of the solution between the two pieces of glass. ^{[10]
X
Research source}
4
Press the pieces of glass together. Before the solution has time to evaporate, press the two pieces of glass firmly together. Use alligator clips to hold them in place. Your cell is now capable of producing electrical currents when exposed to light. ^{[11]
X
Research source}
- You can test this by placing the cell in sunlight and using a multimeter to check for current.

Community Q&A

Search

Add New Question

Question

Is there a cheaper, simpler way to do this?

Community Answer

In terms of cost per watt, the cheapest known way is to buy a ready made solar cell. The one shown here is interesting, but due to the fact that conductive glass is NOT a cheap product - and it produces (according to the photo), a shade under 120 microamps, output is tiny. I do not know the voltage produced - though I would guess between 0.6v and around 1.2v - so the total generated power would be in the order of 72 microwatts and 144 microwatts. To put that into perspective, if we allow the more generous of the two figures above and then round the power up to 150 microwatts, we would still need 20,000 panels to produce enough power to drive a 3w LED lamp.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 23 Helpful 66
Question

What is the function of the tea?

Community Answer

Teas contain organic compounds known as anthocyanins. These compounds are good at capturing light in the visible spectrum

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 10 Helpful 20
Question

Where can I get a copper sheet?

Community Answer

Copper sheets are available via traders selling nonferrous metals in any major city. These traders supply metals to metal industries. For further information, search "nonferrous metals traders" in search engines in your location.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 32 Helpful 58

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Video

Tips

You can also use a sheet of copper to make a solar powered cell in your home.

Thanks
Helpful 5 Not Helpful 2

Submit a Tip

All tip submissions are carefully reviewed before being published

Name

Please provide your name and last initial

Submit

Thanks for submitting a tip for review!

Things You'll Need

Powdered donuts
Ethanol
Hotplate
Conductive glass
Graphite pencil
Electrolyte solution
Tape

[1]

[2]

[3]

[4]

[5]

[6]

[7]

[8]

[9]

[10]

[11]

Log in

How to Make Solar Cell in Home

Creating a DIY Solar Cell

Steps

Obtaining Titanium Dioxide

Creating a Solar Cell

Generating a Current

Community Q&A

Video

Tips

Things You'll Need

You Might Also Like

References

About This Article

Reader Success Stories

Did this article help you?

Quizzes

You Might Also Like

Featured Articles

Trending Articles

Featured Articles

Featured Articles

Watch Articles

Trending Articles

Quizzes

Explore Categories