PDF download Download Article PDF download Download Article

As anyone who has ever had their fingers bonded together with super glue can attest, it is not the easiest substance to remove. Though super glue is a fast-drying and strong adhesive, you may want it to dry faster. By using the materials properly, you can greatly speed up the drying process. Keep everything you need within reach, because it doesn’t take long for super glue to set!

Part 1
Part 1 of 2:

Binding the Parts Together Correctly

PDF download Download Article
  1. Dirty surfaces can prevent proper binding, so you’ll want to remove any dust, oil, paint, or other dirt before applying your glue. Thoroughly wipe the surfaces and be sure to allow them to dry. [1]
    • Super glue works best on porous materials, and may not work well on smooth surfaces such as glass.
  2. Watermark wikiHow to Make Super Glue Dry Fast
    To ensure a quick and clean drying process, make sure that the surfaces are mated together as best as possible. This means using enough glue to connect the parts without leaving too much space between them. The glue forms the strongest bond when there is little to no gap between the parts, and should not act as a filler. The general rule is about one drop per square inch. [2]
    • Be sure to keep some acetone nearby in case you get glue on your hands or an unwanted surface and need to remove it!
    Advertisement
  3. Watermark wikiHow to Make Super Glue Dry Fast
    After applying a thin layer of glue on the surface, you will then want to attach it to the other surface to create a long-lasting bond. A tight and secure attachment will ensure a strong connection and will speed up the drying process. You can clamp the surfaces together to create a tighter seal and to hold the parts together as the glue dries. [3]
    • The glue will hold after a few minutes, but will take about 24 hours to fully set.
  4. Advertisement
Part 2
Part 2 of 2:

Speeding up the Drying Process

PDF download Download Article
  1. Super glue is very sensitive to temperature. A little bit of warm air can go a long way and speed up the time it takes the glue to set. Be sure to move the hairdryer around so as not to overheat an area. [4]
    • A naturally warm environment will also speed up the drying process. That’s why the super glue bottle says to store in a cool place!
  2. To increase the airflow around your drying glue, you can use simple devices like a fan or an open window to increase the circulation in the room. It is also a good practice to have good circulation and ventilation when working with chemicals like super glue as overexposure can lead to nausea, headache, and other negative health effects. [5]
    • You can also use your breath to apply airflow!
  3. Watermark wikiHow to Make Super Glue Dry Fast
    Baking soda can act as what is called an “accelerator” and reduce the time it takes for the glue to set. [6] After you apply the super glue, sprinkle a little bit of baking soda and the glue will set almost instantaneously. [7]
    • Be careful when adding baking soda as it will cause the glue to heat up.
    • There are also chemical accelerators that you can find at your local hardware store that will cause the super glue to set quicker.
  4. Advertisement

Expert Q&A

Ask a Question
      Advertisement

      Video

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      Advertisement

      About This Article

      Thanks to all authors for creating a page that has been read 171,405 times.

      Did this article help you?

      Advertisement