Download Article
Download Article
Velcro loses its stickiness when it gets clogged up with lint and grime. Usually, you can make Velcro stick again by cleaning lint and debris out of it, but if your Velcro is old and worn-out, you'll have to replace it. To prolong the life of your Velcro, take preventative measures to keep it clean.
Steps
-
Pull out loose lint and other matter caught in the Velcro with your fingers. Pinch any large pieces of matter that are caught in the Velcro between your fingernails and pull them out. Think of how you would clean out hair from a hairbrush, and do the same for the lint, hair, and other things that are caught in the Velcro. [1] X Research source- Velcro tabs consist of two parts called a hook and loop fastener system. The rougher side is called the hook, and the softer side is called the loop. The hook is generally the part that collects the debris because this is the part of the Velcro that grabs and sticks.
- It is possible that over time your Velcro will stop being sticky because the hooks get damaged. In this case, cleaning will only do so much and you may have to replace the Velcro if you cannot restore its grabbing power.
-
Pick out lint and debris that you can’t reach with your fingers with tweezers. Hold the Velcro steady with a hand. Use a pair of tweezers with your other hand to pluck out pieces of matter that are caught further down in the hooks of the Velcro. [2] X Research source- Be careful not to grab and pull on the hooks with the tweezers. You might damage them and cause your Velcro to be less sticky.
Advertisement -
Use a pin or needle if you don’t have tweezers to pull out matter. Slide the pointy end between the rows of hooks and underneath debris, then gently lift up to pull out the matter. Work in the same direction as the rows of hooks are facing on the Velcro.- You can use any small, thin, and needle-like object for this method. Just make sure that it is sturdy enough to pull out debris that might be really stuck in the Velcro without bending.
-
Scrape debris out of the Velcro with a fine-toothed comb instead of a needle. Hold the Velcro flat and securely in place. Slide a plastic, metal, or wooden comb along the rows of hooks to scrape out stubborn lint and other debris that you can’t pluck or lift out. [3] X Research source- Make sure the teeth of the comb are not so fine and delicate that they could break as you scrape out debris.
-
Brush the Velcro with a dry toothbrush after you pull out as much as you can. [4] X Expert Source James Sears
House Cleaning Professional Expert Interview. 28 August 2019. Use an old toothbrush that you don’t need for your teeth anymore. Brush the Velcro in 1 direction parallel to the rows of hooks to get out any remaining pieces of lint and other matter. [5] X Research source- A stiff-bristled toothbrush works best, or you can use another kind of stiff brush like a dish brush or a pet brush.
- Be careful not to scrub too hard or you might damage the hooks on the Velcro. This is why it’s important to work parallel to the hooks so that they keep their form as you brush out debris.
Advertisement
-
Keep Velcro tabs closed as much as possible so they don’t collect debris. Close the hook and loop fasteners on Velcro whenever you are not using it. This will protect the hooks from picking up stray matter like lint, hair, and other debris. [6] X Research source- Velcro is designed to be sticky and will easily grab onto things like blankets or clothes from which it will pick up lint.
-
Close Velcro tabs on garments before washing them. [7] X Expert Source James Sears
House Cleaning Professional Expert Interview. 28 August 2019. When you wash Velcro it will pick up lint, hair, and anything else floating around in the washing machine. Keep the hook and loop fasteners closed when you wash Velcro to keep this from happening.- Wash garments that contain Velcro separately from other items when possible.
-
Let Velcro air dry instead of putting it in the dryer. Washers and dryers are full of lint that Velcro attracts. Leave garments that contain Velcro to air dry so the Velcro doesn't pick up lint from other clothing and fabric items.- If air drying isn't possible, then keep the Velcro tabs closed and dry the garments in the dryer separately from other items.
Advertisement
Expert Q&A
Search
-
QuestionHow can I revive Velcro?James Sears leads the customer happiness team at Neatly, a group of cleaning gurus based in Los Angeles and Orange County, California. James and the team have nine years of experience and offer green cleaning, interior and exterior window washing, and general apartment cleaning services. He provides transformative cleaning experiences by reducing clutter and renewing your home environment. James is a Trustee Scholar at the University of Southern California.If there's debris caught in the Velcro strip, try cleaning it out with a toothbrush.
-
QuestionHow do you clean Velcro so it sticks again?Drew Hawkins1Community AnswerCleaning Velcro is a super effective way to revive it and make it stick again. It's also pretty easy to do. Start by pulling out loose lint and other stuff that's caught in the Velcro with your fingers. Then, hold the Velcro steady and use a pair of tweezers to pull out pieces of debris and other junk that's caught further down in the hooks of the Velcro. But, be careful not to grab and pull on the hooks with the tweezers or you could damage them and cause your Velcro to be less sticky. Then, slide a plastic, metal, or wooden comb along the rows of hooks to scrape out stubborn lint and other debris that you can’t pluck or lift out. Finish up by brushing the Velcro in 1 direction parallel to the rows of hooks to get out any remaining pieces of lint and other matter.
-
QuestionHow do I keep Velcro clean?Drew Hawkins1Community AnswerThe best way to keep your Velcro sticking is to prevent it from collecting dirt and debris in the first place. Close the hook and loop fasteners on Velcro whenever you aren't using it to protect the hooks from picking up hair, lint, and other junk. Whenever you wash the Velcro, keep the hook and loop fasteners closed when you wash Velcro to keep them from picking up stuff floating around in the washing machine. If you can, let the Velcro air dry instead of using your dryer, which are full of lint that Velcro attracts. If you need to use a dryer, keep the tabs closed and try to dry the Velcro separately from other items.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
References
- ↑ https://www.apartmenttherapy.com/how-to-clean-velcro-37292609
- ↑ https://www.apartmenttherapy.com/how-to-clean-velcro-37292609
- ↑ https://youtu.be/iYOM6ntVzMc?t=60
- ↑ James Sears. House Cleaning Professional. Expert Interview. 28 August 2019.
- ↑ https://www.Velcro.co.uk/blog/2018/06/how-to-make-Velcro-brand-fasteners-stick-again/
- ↑ https://youtu.be/MG6wQjm6YCs?t=32
- ↑ James Sears. House Cleaning Professional. Expert Interview. 28 August 2019.
About This Article
Article Summary
X
Velcro sometimes loses its stick when dirt and lint get trapped in the fibers. If you notice anything sticking to your Velcro, grab it with your fingers or a pair of tweezers and pull it out. You can also slide the tip of the needle or the tines of a fine-tooth comb under hard-to-reach hairs or bits of lint and lift them out that way. Once you’ve gotten as much debris out as you can, brush the Velcro with an old toothbrush, moving with the grain of the hooks or loops. Keep Velcro fasteners closed as much as possible to prevent more debris from building up. Air-dry your Velcro items after washing them so they don’t pick up fresh lint in the dryer. For tips about how to keep Velcro clean, keep reading!
Did this summary help you?
Thanks to all authors for creating a page that has been read 292,869 times.
Advertisement
