Download Article
Download Article
Playing the drums is a great hobby, but drum sets are so expensive! Luckily, there are lots of ways that you can put together your own at home. Nowadays, you can make a digital drum kit with just your computer and some free software. If you prefer a physical kit, you can put together a makeshift drum set at home with just spare things you have lying around. Many great drummers got started on a kit like this. With these tips, you can make your very own drum set at home and get started on your musical journey.
Steps
-
Listen to music you like to determine the sound you want. The sound you pick for your kit is very personal and depends on what type of music you want to make. Listening to other music is the best way to get ideas. Focus on the genres that you want to play and pay particular attention to the drum tones and patterns. This way, you’ll already have an idea of the sound you want. [1] X Research source
- Rock music usually uses a crisper, acoustic-sounding drum tone to replicate what a live band might sound like.
- Jazz drums usually sound a bit thin with lots of treble so they don’t overpower the rest of the band.
- Dubstep, R&B, or rap music uses very deep bass sound and a more synthetic tone.
-
Pick a high-pitched snare that cuts through the mix. On a drum kit, the snare should produce a crisp, high-frequency tone that you can hear over the rest of the music. Building the rest of your kit around this tone is a good idea because you can complement that sound with more low or mid-range tones from the other drums. Keep that in mind when you pick your snare sound. [2] X Research source
- The best rock snare tones produce a prominent “crack” sound, which really helps them cut through the rest of the band.
- A jazz snare is usually a little flatter and looser than a rock tone. This helps accentuate drum rolls and ghost notes.
- Rap, R&B, and dubstep tracks often use different tones for the snare, like snaps or claps. This works fine if this is the sound you’re going for. Just make sure the tone is easy to hear.
- Some producers layer the snare drum, meaning they use multiples tones. Using a high-frequency snare with a lower tone on top of it gives you a stronger sound.
Advertisement -
Choose a low-end bass drum sound. The bass drum is the opposite of the snare. It covers the low-end of the drum kit, so pick a tone with a good, low-frequency sound. You should be able to hear the bass drum clearly, but it shouldn’t be so loud that it overpowers everything. [3] X Research source
- The amount of “boom” you’d want from your bass drum depends on the genre you’re going for. Rock, R&B, and dubstep music often use very heavy bass sounds that are the most prominent part of the kit.
- Punk, metal, or jazz music usually uses a more subdued bass drum that doesn’t overpower everything else.
-
Add cymbal tones that don’t overpower the rest of the kit. You might not think too much about your cymbal sound, but it’s a very important part of the kit. The hi-hat and ride cymbal ideally produce quick, “click” sounds for a consistent beat. The crash cymbal accentuates certain beats, so make it prominent. [4] X Research source
- Cymbal tones are similar across genres, but you can make some variations if you prefer. Rock music usually uses a more pronounced and sustained cymbal sound to accentuate certain beats, while jazz and R&B usually doesn't make the cymbals as prominent.
- You can also mix in an open and closed hi-hat sound for more variety. An open hi-hat has more sustain and vibration, whereas a closed one only covers one beat.
- Balance the crash cymbal so it doesn’t cover all the other drums. Make it loud enough to stand out, but not so loud that it covers the rest of the band.
-
Mix in tom tones for more variety. Toms aren’t a crucial part of your drum kit, so you have a choice on whether or not you add them. Kits often have 2 or 3 toms, ranging from high-pitched to low-pitched. If you use toms, give them a mid- to low-frequency between the snare and bass pitch. This fills out the kit with more tones you can use. [5] X Research source
- Toms are important for a rock or jazz kit for fills and solos. Rap and R&B music focuses more on the beat without flashy playing, so toms aren’t as important.
Advertisement
-
Get 2 or 3 plastic buckets of different sizes. Plastic buckets or bins are great choices for the toms on your drum set. Standard drum sets have 2 or 3 toms, 1 on the floor and 1 or 2 on the racks above the bass drum. Pick 2 or 3 buckets of different sizes so they produce different sounds. [6] X Research source
- You can use spare containers, or find a few cheap ones at a hardware store.
- You could also use paint cans or plastic jars as well. Any rounded container is a good choice. Just remember that different materials make different noises. A metal container will produce a sharp, high-pitched tone, while plastic gives you a deeper, lower-pitched sound.
-
Cover the opening of each bucket with clear packing tape. This is an easy way to make a drum head for the toms. Take clear packing tape and stretch it tightly over the bucket openings. Seal the openings completely to install a drum head on each bucket. [7] X Research source
- Make sure the tape is tight. If you leave it too loose, you won’t get much of a sound.
- You may want to place another layer of tape over the first one so the drum heads last longer.
- You could also use another strong type of tape, like duct tape. Masking or painter’s tape is too fragile, so don’t try it.
-
Fill a cookie tin with coins for a snare drum. A snare drum should have a sharper, more high-pitched sound than the toms. You can make this sound with a metal cookie tin. Layer the bottom of the tin with coins or metal bottlecaps and put the lid back onto the tin. The coins will rattle when you hit the drum and produce a distinctive snare sound. [8] X Research source
- The size of the can or tin isn't very important for a homemade kit, but an average snare drum is about 14 in (36 cm) in diameter. Get a tin close to that size if you want to copy a real kit.
- If you don’t have a cookie tin, you could also use a smaller plastic or metal bucket for the snare. This will make a higher pitch than the toms. Remember to add the coins to you get the distinctive rattle of a snare drum.
- Don't cover the snare with tape like you did for the other drums. This will give you a duller sound, and you don't want that for a snare.
-
Use metal items for cymbals. Basically any metal item will work as a cymbal. Good choices include metal pot lids, bars or pipes, and gardening tools. Most drum sets have at least a hi-hat cymbal and a crash cymbal, so try to find 2 metal items that will work. [9] X Research source
- For a hi-hat, you want a shorter, sharp sound. A metal bar or small metal lid can work for that. For a crash cymbal, you want a longer echo. Try a large lid from a pot or metal garbage can cover. Test out a few items to see what makes the best sound.
-
Secure a plastic garbage bin for a bass drum. All you need for your bass drum is a plastic garbage can flipped on its side. Get a large can, like an outdoor trash bin. You’ll be hitting the bottom of the garbage bin, so make sure that end is facing the back of the kit. You don’t want the bass drum moving or tipping while you’re trying to play. Lay weights or other heavy items inside the bin to hold it down. Also arrange some wood blocks or heavy bins on either side of it to keep the drum straight. [10] X Research source
- If this drum setup will be permanent, you could secure the bin further by placing it on top of a flat piece of wood and drilling it down with screws.
- You’ll still need a kick pedal to work the bass drum with your foot. You can get a cheap one online or from a music shop.
- If you don't want to buy a kick pedal, you could simply kick the back of the can to make a bass tone. Wear shoes for a more pronounced sound.
-
Put your snare drum on your left. On most drum kits, the snare drum sits on the drummer’s left side. Either set the cookie tin on the floor, or if it’s too low, you can prop it up on a box so you can comfortably hit it while you’re sitting down. [11] X Research source
- If you’re a left-handed drummer, you may want to put your kit together in reverse and put the snare on your right side.
-
Tape the 2 smaller buckets on top of the garbage bin. These 2 smaller buckets will be your 2 rack toms. Take the smallest one and place it on top of the garbage bin slightly to the left. Use a lot of packing tape and attach it to the bin. Then place the larger bucket to the right of that one and tape it down the same way. [12] X Research source
- Test both toms to make sure they’re attached tightly. Add more tape as you need to.
- If you’re only using 1 rack tom, then only tape one bucket down.
- If you prefer to angle the toms up a bit more so they’re easier to hit, try placing a piece of wood or foam under the front of the bins. This way, they’ll angle up a bit more.
-
Set the largest bucket on the floor to your right. The largest bucket will produce the deepest sound, so it’s perfect for your floor tom. Simply set it to the right side of the bass drum on the ground, close enough for you to hit it. [13] X Research source
- If the bucket is too low for you to reach, set it on top of a box to prop it up a bit.
-
Tape the cymbals to stands or poles. A microphone stand, easel stand, or block of wood that stands are all great for securing the symbols. Tape the metal pieces to holders like these and check to make sure they’re tight. [14] X Research source
- If you don’t have stands, you could also just tape the cymbals alongside the toms.
- If you have spare drum hardware, then you could also attach the cymbals to this.
-
Arrange the cymbals on either side of the bass drum. Typically, the hi-hat cymbal goes on the left next to the snare drum, so put the smaller metal piece here. Then put the crash cymbal on the right side, near the floor tom. [15] X Research source
- You could also put the crash on the left side near the hi-hat if you prefer. There’s no set rule and it depends on what you find more comfortable.
- If you set up your drum kit like a lefty, then put the hi-hat on the right side next to the snare instead.
-
Grab some wooden spoons or sticks for drumsticks. Once your kit is put together, you just need some sticks to play! You don't need special drumsticks. A pair of wooden spoons will work just fine. You could also use regular wooden sticks to play your kit. [16] X Research source
Advertisement
Expert Q&A
Search
-
QuestionWhat is the proper way to hold a drumstick?Bart Robley is a Drummer, Drum Teacher, and Author based in Ontario, California. Bart has been sharing his expertise in drumming knowledge through teaching for over 30 years. He makes his teachings globally accessible by offering lessons in an online format. Bart has authored three instructional books and created three instructional DVDs. He received a Bronze Telly Award in 2009 for his DVD "School Of Hard Rocks. Additionally, Bart has been the drummer for the Sam Morrison Band for over 25 years.With the French grip you're holding your hands in front of you and your palms are facing each other. You hold the sticks between your thumb and the first knuckle of your index finger. You'll have a pivot point about a third of the way up to this stick. The Germanic and the American grip are both more palm down, with a 45-degree angle, your palms would be facing more down.
-
QuestionWhat website should I go on to build my drum kit?Dakota DotyCommunity AnswerHead to Guitar Center's official website, where you can search for several drum kits and several other instruments (pre-owned and new).
-
QuestionHow can I make my own drum kit?Community AnswerFollow the instructions listed in the article above.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Things You’ll Need
Creating a Kit with Software
- Drum software
Making a Kit from Household Items
- Plastic bins of different sizes
- Cookie tin
- Plastic garbage bin
- Packing tape
- Coins or bottlecaps
- Drum sticks or wooden spoons
- Kick drum pedal
- Stool or chair
- Cymbal stands
- Metal pieces
Tips
- Feel free to rearrange or add pieces to your drum set if you want to. There are no rules on what it’s supposed to look like.Thanks
- Don’t use too much power when you hit homemade drums. You could break them if you aren’t careful.Thanks
- These aren’t the only materials you can use to make drums. Try anything that you can hit and make noise with!Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Thanks for submitting a tip for review!
Advertisement
Expert Interview
Thanks for reading our article! If you’d like to learn more about making instruments, check out our in-depth interview with Bart Robley .
References
- ↑ https://cecm.indiana.edu/361/redrum-tutorial.html
- ↑ https://www.musicradar.com/tuition/tech/18-steps-to-the-perfect-sampled-drum-sound-195170
- ↑ https://www.musicradar.com/how-to/how-to-create-brand-new-beats-by-layering-drum-samples
- ↑ https://www.musicradar.com/tuition/tech/18-steps-to-the-perfect-sampled-drum-sound-195170
- ↑ https://www.aimm.edu/blog/5-tips-for-bigger-sounding-drums
- ↑ https://youtu.be/L56LYyqlUgs?t=42
- ↑ https://youtu.be/uwsiMfqnIgs?t=77
- ↑ https://youtu.be/uwsiMfqnIgs?t=281
- ↑ https://makingmusicmag.com/make-your-own-drum-kit/
- ↑ https://youtu.be/J-FhLn0Jflo?t=180
- ↑ https://makingmusicmag.com/make-your-own-drum-kit/
- ↑ https://youtu.be/L56LYyqlUgs?t=54
- ↑ https://makingmusicmag.com/make-your-own-drum-kit/
- ↑ https://youtu.be/uwsiMfqnIgs?t=576
- ↑ https://youtu.be/J-FhLn0Jflo?t=253
- ↑ https://makingmusicmag.com/make-your-own-drum-kit/
About This Article
Thanks to all authors for creating a page that has been read 81,812 times.
Reader Success Stories
- "This helps me a lot. Especially when I don't have the money to spend."
Advertisement
"This helps me a lot. Especially when I don't have the money to spend."
