Download Article
Download Article
Making a frisbee is a fun way to play a game of catch with a friend. Homemade frisbees are lightweight and fairly soft making them ideal for indoor play. Using simple items like paper plates, paper and tape, you can create a fun toy to toss around.
Steps
-
Get out supplies. To make a frisbee you will need two paper plates, packing tape, scissors, and markers for decoration. [1] X Research source
-
Decorate your plates. Use markers to draw designs on the bottom of the plates. You don’t need to decorate the side of the plate you put food on because it will become the inside of the frisbee.Advertisement -
Tape the tops of the plates. Cover the side of the plate that you would place food on with clear packing or shipping tape. Cover the entire surface of the plate and trim the excess tape from around the edges of the plate.
- You can use decorative duct tape to tape the plates and decorate your frisbee at the same time.
-
Cut a circle out of the center of the plates. Cut out the center of the flat portion of the plate. Your circle should be about 3 inches in diameter. Trace a circle using a large cup. Stab scissors through the center of the plate and cut out the circle leaving the edges of the plate intact.
-
Tape the two plates together. Attach the plates together with the packing tape around all the edges. Cover the entire decorated surface of the plate with the tape. Tuck the excess ends of the tape around the hole in the center of the plates. [2] X Research source
-
Toss your frisbee. Hold the frisbee parallel to the ground and throw it by snapping your wrist as you release.
Advertisement
-
Fold the Post-it note it half. Fold the Post-it so that the sticky end sticks to itself. Position the Post-it so that the sticky end is on the left side. The sticky part will be on the inside of the fold. [3] X Research source
-
Crease the top right corner down. Fold the corner down so the right edge of the Post-it is aligned with the bottom edge. The post it should look like a square on the left half and a folded triangle on the right half. [4] X Research source
-
Unfold and open the Post-it. You will see a vertical crease down the center of the sticky portion and two diagonal creases along the bottom.
-
Fold the sticky ends to the center. The sticky end will hold the edges down. Fold both edges to the center. The Post-it should be in a “house” shape.
-
Refold the post it in half. It should now have a point on one end with the diagonal crease visible on the other side. [5] X Research source
-
Push the square end toward the center and flatten to form a parallelogram. Fold the end along the diagonal creases in an inward fold. This is the basic shape that will be used to form the frisbee. If you look at the post it from the open side of the folds, you should see a V shape.
- One side of the parallelogram will be a single point while the other end will have two flaps.
-
Fold seven more Post-its for a total of eight. You will need eight folded parallelograms to create your frisbee.
-
Connect the shapes together. Attach the 8 shapes together by inserting the end with the single point between the two flaps of another Post-it.
- Place one Post-it between the flaps of another.
- Fold the ends of the two flaps over the flaps of the Post-it you inserted.
- The flaps of the Post-it that were inserted will receive the next Post-it.
- When all 8 Post-its are connected you will end up with a donut shape.
-
Throw your frisbee. Flatten the shape to get the best results when attempting to throw your pocket sized frisbee.
- You can push the opposite edges of the donut shape together to transform your frisbee into a star shape.
Advertisement
-
Fold eight sheets of paper into paper claws . Use colored paper to make a colorful frisbee. You will need to fold all eight sheets into claws to create your frisbee.
-
Insert the point of one claw into the opening of another. Use tape to secure each claw together. Continue inserting the claws into one another to create an octagonal shaped donut.
-
Wrap the frisbee with tape. Use scotch tape or duct tape to give stability and strength to your paper frisbee.
- Use tape to connect each claw together.
- Wrap the entire frisbee using decorative tape to add stability and a design element.
-
Throw your frisbee. You should be able to get considerable distance with the ring shaped frisbee.
- If you use duct tape to wrap the frisbee it should be used outside because it can be thrown a long way!
Advertisement
Expert Q&A
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Things You'll Need
- Paper plates
- Packing tape or decorative duct tape
- Scissors
- Markers
- Paper
- Post-it notes
Tips
- Try using different amounts of spin as you release the frisbee by snapping your wrist. Experiment to see how far you make the frisbee fly.Thanks
- Make sure you aren’t throwing the frisbees where there are breakable items to avoid problems.Thanks
- Be creative when decorating your frisbees.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Thanks for submitting a tip for review!
Advertisement
References
- ↑ https://www.makeandtakes.com/summer-camp-for-kids-paper-plate-frisbees
- ↑ https://krokotak.com/2014/05/cool-diy-frisbee-from-paper-plates/
- ↑ https://www.paperairplanes.co.uk/frisbee.php
- ↑ https://www.origamiway.com/origami-transforming-ninja-star.shtml
- ↑ https://www.origami-fun.com/8pointed-transforming-ninja-star.html
About This Article
Thanks to all authors for creating a page that has been read 83,025 times.
Advertisement
