How to Make a Harp

PDF download Download Article
Everything you need to craft your own gorgeous instrument from scratch
PDF download Download Article

Harps come in all shapes and sizes, but at its core the harp is a simple triangular frame with a series of strings of varying lengths. Making a harp requires a serious investment of time and energy, as well as some specialized tools. Before making a harp, do some research online, or find a professional harp maker to consult. Search for blueprints and designs to give you an idea of the parts that make up a harp. Start small and don't worry about making a masterpiece on your first attempt.

Part 1
Part 1 of 3:

Planning Your Harp

PDF download Download Article
  1. If you want to build your own harp, consider starting with a Celtic, or Lever harp. While there are many types of harp to choose from, the Lever harp is one of the more common types of harps, and may be easier to build for a beginner. [1]
    • The Paraguayan harp, while less common, is gaining popularity. Paraguayan harps are much lighter than other harps, and are easier on the fingers due to a lighter string tension.
  2. Look around at various harps and study them. Find qualities in each harp that you like, and those that you don't. If you're designing the harp for yourself, consider trying to copy the design of a harp you like. [2]
    • You can find a variety of harp plans online, even some for free. Some designs are simple, while others can be complex and quite expensive. [3]
    • If you feel confident in your abilities, you could try designing the harp completely from scratch. [4]
    • If you copy someone's design, do not try to sell it. The original designer may file a lawsuit against you for plagiarism. [5]
    Advertisement
  3. The type of wood you use in constructing your harp will have an effect on the sound quality and string tension. You can build harps out of several different types of wood, such as maple, oak, cherry, or spruce. [6]
    • Harder woods will allow you to build a harp with more string tension. You can use softer woods, but it may affect the lifespan of the instrument. [7]
  4. Building a harp can get expensive, especially if you don't have access to the various tools required to work the wood. Other factors, such as what type of wood you decide to use, will also affect the final cost of your harp. [8]
    • If you are building a harp for the first time, consider building a simple harp. Use inexpensive materials and focus on getting the technique right. You can even try to salvage the necessary lumber. [9]
    • Building a harp also requires a serious investment in time. Expect to spend at least 28 hours on a simple design. It is possible to spend upwards of 100 hours or more on a complex harp build. [10]
    5. Advertisement
Part 2
Part 2 of 3:

Building the Parts

PDF download Download Article
  1. Sound boxes, or shells, typically come in three styles: square back, round back, and stave back. [11]
    • The size of the shell depends on a few other dimensions on your harp. Consider the length and width of your soundboard, as well as the angles of the top and bottom of the harp relative to the shell. [12]
    • Square shells are easier to build than round or stave shells. A simple square shell consists of four boards screwed together with a plywood back. [13]
    • Stave shells consist of several planks attached to each other and then placed in a cradle to add a curve. Building a stave shell requires a lot of precision, as well as the construction of a cradle to curve the staves. [14]
    • A round shell requires more time and skill than both the square and stave shells, as well as some specialized equipment. [15]
    • If you purchased a harp plan, refer to your blueprints for shell construction.
  2. The material you use for your soundboard will contribute to the sound quality of your harp. You can build your soundboard out of redwood, pine, or birch plywood. [16]
    • Soundboards are constructed from several smaller pieces of wood glued and clamped together.
    • Refer to your harp plans to determine how big your soundboard will be. Find several pieces of wood at least 1 ⁄ 4 inch (0.6 cm) thick. The size of your soundboard will determine how many pieces of wood you need. [17]
    • Lay the pieces of wood out edge to edge, taking care to keep the grain horizontal on each piece. Glue the pieces together and clamp them for extra security. [18]
    • Once the glue has dried, you can cut out the shape of your soundboard as required by your harp plans.
    • Taper the soundboard so that it is 1 ⁄ 8 inch (0.3 cm) thick at the top, or treble, end. The bottom, or bass, end of the soundboard should be around 1 ⁄ 4 inch (0.6 cm) thick.
    • If you use plywood, make sure the grain of the wood runs across the width of the soundboard. This will prevent any premature cracking. [19]
  3. The string ribs lay across the width of the soundboard. String ribs add support to the harp and prevent potential cracking. [20]
    • String ribs come in various sizes and depend heavily on the dimensions of the soundboard, as well as the preference of the harp maker. Consult your harp plans to determine the shape and style of your string ribs. [21]
    • You do not have to include string ribs in your harp. However, if you choose to omit them you will need to reinforce your harp. The tension from the strings may cause the wood to crack. [22]
  4. Using epoxy or a glue of your choice, align the soundboard on top of the shell. Have clamps ready to hold the pieces together while the glue dries. [23]
    • Depending on the shape of your shell, glue may not be enough to securely fasten the soundboard. If you are using a round or stave shell, consider using staples or screws as well as glue. [24]
    • If you use staples or screws, take care not to use too much force or you may damage the shell. [25]
  5. Follow your harp plans and trace the design of the neck and pillar on your chosen wood. Cut the neck and pillar to shape, and then sand any rough edges out. [26]
    • Do not smooth the joining surfaces, surfaces where pieces connect, until it is time to combine the parts. [27]
    • Drill holes in the neck for tuning pins. Use a 3 ⁄ 16 inch (0.5 cm) bit and work carefully. Don't try to drill all the way through in one plunge. Rather, make 3-5 plunges, each time moving a little deeper into the neck. Clear out any excess chips from the hole before starting the next plunge. [28]
    6. Advertisement
Part 3
Part 3 of 3:

Assembling Your Harp

PDF download Download Article
  1. While there are many ways to attach the neck and pillar, one of the easier methods is to use dowels. Dowels are pegs that fit into holes drilled into both the neck and pillar. [29]
    • To use dowels, drill three holes into the neck and pillar, taking care to remove any chips from the holes. Clearing the chips will keep your holes straight. [30]
    • Make sure the holes in the pillar line up with the holes in the neck. Cut three dowels long enough to fit into both pieces. Make grooves in the dowels to keep glue from escaping the holes. [31]
    • Test fit the neck and pillar before adding any glue. The dowels should be snug and you shouldn't see any gaps between the neck and pillar. If everything fits, add glue to the dowels and join the pieces. Use clamps to keep everything tight while the glue dries. [32]
  2. Use dowels to attach the neck and pillar to the sound box. Do not use glue to fix the neck and pillar to the sound box. The dowels are there to keep the parts aligned. The angle of the sound box relative to the neck and pillar will hold the pieces together. [33]
    • Keep a gap about 1 ⁄ 8 inch (0.3 cm) thick on the side near the strings. Once you add the strings, the tension will cause this gap to close. Without this gap, you run the risk of cracking the wood. [34]
    • Once you've attached the sound box, you can drill string holes in the sound board. Refer to your harp plans to determine the number of holes you need to drill. [35]
  3. You will need eyelets, bridge pins, and tuning pins to mount your strings. You can buy these online, or your local music shop may carry them. [36]
    • Fit the eyelets into the holes in the soundboard. Coat the sides of the holes with glue, and push the eyelet into the hole. [37]
    • Fit the bridge pins and tuning pins into their respective holes. You may need to adjust the holes in the neck to properly fit the bridge pins. Do not glue these pins into the wood. [38]
    • Start at the bass end of the harp. Feed the string through the eyelet in the sound board and pull it up to the corresponding tuning pin. Wrap the string around the tuning pin a few times to set it. Don't worry about pulling it tight just yet. Mount all the strings before tightening them to the proper tension. [39]
    • It may take several tunings before the strings hold the proper tension. [40]
    4. Advertisement

Community Q&A

Search
Add New Question
  • Question
    Do you think American white oak is good for making a harp?
    Community Answer
    Most luthiers would not use oak, preferring maple, walnut, cherry etc for the neck and soundbox body. I have recently built a 30-string harp with European oak and it's really quite good; I used oak because I had some around in the workshop. You definitely shouldn't use it for the soundboard - that should be spruce, western cedar, poplar or aircraft plywood.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 4 Helpful 13
  • Question
    Is black walnut a good choice for neck and pillar?
    Community Answer
    Black walnut is very durable. While it is susceptible to insect attacks, it has a shock resistance. It is very commonly used for making harps, so yes, it is a good choice. Just make sure it doesn't get stored where it can attract insects.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 8
  • Question
    We have a lot of red cedar is it good for building a celtic harp?
    Community Answer
    Yes. Western red cedar is popular with classical guitar makers and its especially suitable for the small Celtic harp. Cedar is known for its volume, warmth, wealth of harmonics (overtones) and 'bass-iness'. What is most characteristic of cedar is that it takes only a short time for the voice to mature, and can even sound 'played-in' when new.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 3
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      • Building a harp is a complex process. Every harp is a testament to the harp maker's skill and creativity. If you've never built a harp before, buy some plans and start slow. Take time to master the techniques before moving on to more complicated designs.
        Thanks
        Helpful 0 Not Helpful 0
      • John Kovac, an experienced harp player and builder, sells harp kits with instructions to make a wooden Paraguayan harp or a harp structure from PVC pipes.
        Thanks
        Helpful 0 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      You Might Also Like

      How to
      Play the Harp
      How to
      Tune Your Lap Harp to a Major Scale & More
      How to
      Create a DIY Bamboo Flute
      How to
      Build Your Own DIY Theremin from Scratch
      How to
      Make Drums for Kids
      How to
      Make Musical Instruments with Recycled Materials
      How to
      Build a Wooden or Pipe Xylophone
      How to
      Build a Violin
      How to
      Make a Rain Stick
      How to
      Make a Didgeridoo out of PVC Pipe
      How to
      Make Maracas
      How to
      Make a Transverse Flute from Household Supplies
      How to
      Make a Harmonica
      How to
      Make a Chinese Gong
      Advertisement

      References

      1. ↑ https://www.theclintoncourier.net/2020/07/16/the-beginners-guide-to-the-harp/
      2. ↑ https://www.sligoharps.com/2book.pdf
      3. ↑ https://www.sligoharps.com/2book.pdf
      4. ↑ https://www.sligoharps.com/2book.pdf
      5. ↑ https://www.sligoharps.com/2book.pdf
      6. ↑ https://www.sligoharps.com/8book.pdf
      7. ↑ https://www.sligoharps.com/8book.pdf
      8. ↑ https://www.sligoharps.com/1book.pdf
      9. ↑ https://www.sligoharps.com/1book.pdf
      1. ↑ https://www.sligoharps.com/1book.pdf
      2. ↑ https://www.sligoharps.com/3book.pdf
      3. ↑ https://www.sligoharps.com/3book.pdf
      4. ↑ https://www.sligoharps.com/3book.pdf
      5. ↑ https://www.sligoharps.com/3book.pdf
      6. ↑ https://www.sligoharps.com/3book.pdf
      7. ↑ https://www.sligoharps.com/5book.pdf
      8. ↑ https://www.sligoharps.com/5book.pdf
      9. ↑ https://www.sligoharps.com/5book.pdf
      10. ↑ https://www.sligoharps.com/5book.pdf
      11. ↑ https://www.sligoharps.com/6book.pdf
      12. ↑ https://www.sligoharps.com/6book.pdf
      13. ↑ https://www.sligoharps.com/6book.pdf
      14. ↑ https://www.sligoharps.com/7book.pdf
      15. ↑ https://www.sligoharps.com/7book.pdf
      16. ↑ https://www.sligoharps.com/7book.pdf
      17. ↑ https://www.sligoharps.com/8book.pdf
      18. ↑ https://www.sligoharps.com/8book.pdf
      19. ↑ https://www.sligoharps.com/8book.pdf
      20. ↑ https://www.sligoharps.com/9book.pdf
      21. ↑ https://www.sligoharps.com/9book.pdf
      22. ↑ https://www.sligoharps.com/9book.pdf
      23. ↑ https://www.sligoharps.com/9book.pdf
      24. ↑ https://www.sligoharps.com/9book.pdf
      25. ↑ https://www.sligoharps.com/9book.pdf
      26. ↑ https://www.sligoharps.com/9book.pdf
      27. ↑ https://www.sligoharps.com/11book.pdf
      28. ↑ https://www.sligoharps.com/11book.pdf
      29. ↑ https://www.sligoharps.com/11book.pdf
      30. ↑ https://www.sligoharps.com/11book.pdf
      31. ↑ https://www.sligoharps.com/11book.pdf

      About This Article

      In other languages
      Thanks to all authors for creating a page that has been read 115,598 times.

      Reader Success Stories

      • Deeanna M.

        Jul 10, 2019

        "I was looking for a small handheld harp but could only find the plastic costume ones. Decided it was best to make ..." more
      More reader stories Hide reader stories
      Share your story

      Did this article help you?

      Advertisement