PDF download Download Article PDF download Download Article

A pleated skirt may seem like an intimidating project, but they are easier than you might think. You can make a simple pleated skirt without a pattern and with very little math. Try making a plaid skirt for yourself or for a friend!

Part 1
Part 1 of 3:

Measuring and Marking

PDF download Download Article
  1. Making a pleated skirt requires some basic sewing tools and a lot of fabric. You need more fabric to make a pleated skirt than you would to make a non-pleated skirt because of the folds. To make your pleated skirt, you will need:
    • Fabric in the color and type of your choice. Cotton and wool make good pleats, while lighter fabrics like silk and satin do not. Keep in mind that you will need a piece of fabric that is long enough to fit around your waist three times, so you may want to measure the fabric while you are in the store. This amount will provide plenty of room to make the pleats for your skirt. [1]
    • Chalk
    • Scissors
    • Measuring tape
    • Sewing machine
    • Thread
    • A 7” (18 cm) zipper. [2]
  2. Watermark wikiHow to Make a Pleated Skirt
    Use the measuring tape to get your waist measurement and skirt length measurement. Measure around your natural waist or wherever you plan to wear the skirt on your waist. Then, measure from your natural waist (or where you plan to wear the skirt) down to the spot where you want the skirt to end. [3]
    Advertisement
  3. Watermark wikiHow to Make a Pleated Skirt
    After you have your measurements, cut the fabric so that it is 3 times the size of your waist. It should also be 2” (5 cm) longer than you want the finished skirt to be. For example, if your waist measurement was 30” (76 cm) and you want the skirt to be 35” (89 cm) long, then you would need your fabric to be 90” (229 cm) wide and 37” (94 cm) long.
    • Make sure to cut the fabric in a straight line.
  4. Watermark wikiHow to Make a Pleated Skirt
    Next, you will need to decide how wide you want your pleats to be. You can choose any width you like, such as ¾” (1.9 cm), 1 ½” (3.8 cm), or 2 ¼” (5.7 cm). [5] However, it is important for all of your pleats to be the same size, so decide on a width before you begin folding.
    • Keep in mind that the wider your pleats are, the fewer pleats you will have. If you want a lot of pleats in your skirt, then opt for a smaller width. [6]
  5. Watermark wikiHow to Make a Pleated Skirt
    When you have decided how wide to make your pleats, begin marking the fabric on the wrong side. [7] Use twice the measurement that you want each of your pleats to be. This will ensure that when you fold the fabric over, your pleats will be the desired width.
    • For example, if you want your pleats to be 2 ¼” (5.7 cm) wide, then you would need to mark your fabric every 4 ½” (11.4 cm).
  6. Advertisement
Part 2
Part 2 of 3:

Creating the Pleats

PDF download Download Article
  1. Watermark wikiHow to Make a Pleated Skirt
    After you have finished marking your fabric, begin folding the pleats. To fold your pleats, bring the fabric together at your markings and then lay the folded fabric out to one side. Make sure to fold all of the fabric in the same direction or the pleats may look sloppy. Pin the pleats in place as you go. [8]
  2. Watermark wikiHow to Make a Pleated Skirt
    When you have pinned all of your pleats into place, you can sew across the top of the fabric to secure them. Start by just sewing a baste stitch so that it will be easy to undo if you are unhappy with how the pleats look after sewing them. [9]
  3. Watermark wikiHow to Make a Pleated Skirt
    After securing the pleats, use your tape measure to see how long the top edge of the skirt is. This measurement should be able the same as your waist measurement. However, if it is more than a couple of inches wider, then you will need to cut off some of the fabric to adjust the measurement. [10]
    • If you used triple your waist measurement for the fabric, then it is highly unlikely that the measurement will be too small. However, if it is too small, then you will either need to start over or sew a panel onto the edge of the skirt to make up for the missing length.
  4. Watermark wikiHow to Make a Pleated Skirt
    Next, you will need to cut a strip of fabric for your waistband. Measure the distance across your pleats, and then measure and cut out a strip of fabric that is the same length and about 4” (10 cm) wide. You will then need to fold this piece in half lengthwise with the wrong sides aligned. [11]
  5. Watermark wikiHow to Make a Pleated Skirt
    Next, line up the raw edges of the top part of your pleated fabric and the folded waistband piece. Lay the waistband piece on the right side of the fabric. Then, sew a straight stitch about ½” (1.3 cm) from the raw edges of the waistband and pleated fabric. This will secure the waistband piece to the pleated fabric and secure the pleats. [12]
    • Snip any excess threads after sewing the waistband into place.
    • Don’t worry about the raw edges on the short ends of your waistband. These will be hidden after you add the zipper.
  6. Advertisement
Part 3
Part 3 of 3:

Finishing the Skirt

PDF download Download Article
  1. Watermark wikiHow to Make a Pleated Skirt
    Fold the fabric under by about ½” (1.3 cm) and pin the hem in place. Then, sew a straight stitch near the raw edge of your fabric to secure the hem. Remove the pins as you go.
    • Make sure to tug gently to flatten out the fabric as you sew the hem. Do not sew the pleats into place.
    • Snip any excess threads after you finish sewing.
  2. Watermark wikiHow to Make a Pleated Skirt
    When you are ready to add the zipper, locate the area of your skirt that will serve as the back. Then, start pinning the edges of the zipper to the right sides of the fabric that will form the back of the skirt. Begin pinning right at the top of the waistband and move downwards. [13]
  3. Watermark wikiHow to Make a Pleated Skirt
    When you are happy with the placement of your zipper and you have it all pinned, begin sewing along the pinned edges to secure it. Sew about ¼” (0.6 cm) from the edge of the fabric and zipper. Remove the pins as you go. [14]
    • Snip the excess threads after you finish sewing.
  4. Watermark wikiHow to Make a Pleated Skirt
    To complete your skirt, you will need to close up the back seam of your skirt. [15] To do this, line up the remaining open edges of your fabric so that they are even and so that the right sides are facing each other. This will ensure that the back seam will be hidden. Then, sew a straight stitch about ½” from the edges of the fabric. Sew all the way from the bottom of the zipper to the bottom of the skirt.
    • Snip the excess threads after you finish sewing.
    • After you finish sewing your zipper into place, your pleated skirt is complete!
  5. Watermark wikiHow to Make a Pleated Skirt
    . If you want to have crisp, obvious pleats in your skirt, then you may consider ironing them down flat after finishing your skirt. [16] Iron each of the pleats individually starting from the top of your skirt and moving downwards. However, keep in mind that this is optional.
  6. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    How much fabric do I need for a pleated skirt?
    Margo West
    Professional Tailor
    Margo West is a Professional Tailor and the Owner of Margo West Bridal Alterations in Dallas, Texas. She is renowned for her expertise in bridal alterations, custom wedding gowns, wedding-related design, and pattern making. Her 44 years of bridal experience has earned her the prestigious WeddingWire Brides Choice Award, Couples Choice Award 2013-2019, and The Knot Best of Weddings 2018-2020. Margo was also featured in House of Diffa 2018 Jacket Collection and Modern Luxury Brides Magazine 2020. She will launch her new bridal gown collection for fall 2021.
    Professional Tailor
    Expert Answer
    Start by measuring your waist and skirt length—remember to write these down. You'll need 3 times your waist size to ensure that your pleats are generous, plus a seam allowance and zipper install.
  • Question
    Should I use large or small pleats?
    Margo West
    Professional Tailor
    Margo West is a Professional Tailor and the Owner of Margo West Bridal Alterations in Dallas, Texas. She is renowned for her expertise in bridal alterations, custom wedding gowns, wedding-related design, and pattern making. Her 44 years of bridal experience has earned her the prestigious WeddingWire Brides Choice Award, Couples Choice Award 2013-2019, and The Knot Best of Weddings 2018-2020. Margo was also featured in House of Diffa 2018 Jacket Collection and Modern Luxury Brides Magazine 2020. She will launch her new bridal gown collection for fall 2021.
    Professional Tailor
    Expert Answer
    Make smaller pleats if you want to have a lot of them, or use larger pleats if you want fewer. Once you decide on the size of your pleats, measure and mark them on the wrong side of your fabric.
  • Question
    How do I sew a pleated skirt?
    Margo West
    Professional Tailor
    Margo West is a Professional Tailor and the Owner of Margo West Bridal Alterations in Dallas, Texas. She is renowned for her expertise in bridal alterations, custom wedding gowns, wedding-related design, and pattern making. Her 44 years of bridal experience has earned her the prestigious WeddingWire Brides Choice Award, Couples Choice Award 2013-2019, and The Knot Best of Weddings 2018-2020. Margo was also featured in House of Diffa 2018 Jacket Collection and Modern Luxury Brides Magazine 2020. She will launch her new bridal gown collection for fall 2021.
    Professional Tailor
    Expert Answer
    Cut your fabric, then mark and fold your pleats. Check to make sure the waist of your skirt is the right size, then sew up the back seam. Be sure to leave enough space to add your zipper. Finally, add your waistband and hem the skirt to your desired length.
See more answers
Ask a Question
      Advertisement

      Video

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!

      Things You’ll Need

      • Fabric
      • Scissors
      • Sewing machine
      • Thread
      • Measuring tape
      • Chalk
      • 7” (18 cm) zipper

      References

      1. http://apairandasparediy.com/2015/04/diy-pleated-midi-skirt/
      2. http://www.simplesimonandco.com/2014/09/wide-waistband-pleated-skirt-tutorial.html/
      3. Margo West. Professional Tailor. Expert Interview. 7 December 2020.
      4. Margo West. Professional Tailor. Expert Interview. 7 December 2020.
      5. https://www.threadsmagazine.com/2008/11/05/easy-pleated-skirts
      6. Margo West. Professional Tailor. Expert Interview. 7 December 2020.
      7. Margo West. Professional Tailor. Expert Interview. 7 December 2020.
      8. http://apairandasparediy.com/2015/04/diy-pleated-midi-skirt/
      9. http://apairandasparediy.com/2015/04/diy-pleated-midi-skirt/

      About This Article

      Article Summary X

      To make a pleated skirt, start by measuring your waist and skirt length and cutting the fabric to your measurements. Next, decide on the size of your pleats and mark them on your fabric. Then, fold and pin the pleats, making sure they’re all going in the same direction. Once the pleats are pinned, sew across the top of the fabric to secure them. Measure the distance across your pleats, and then measure and cut out a strip of fabric to create the waistband, which you’ll then sew to the top of the skirt. To learn how to iron your pleats when your skirt is done, keep reading!

      Did this summary help you?
      Thanks to all authors for creating a page that has been read 217,525 times.

      Reader Success Stories

      • Ellen Bugeja

        Mar 12, 2019

        "This video and information is very easy to follow and understand. It's great to be able to produce a pleated ..." more
      Share your story

      Did this article help you?

      Advertisement