How to Make a Simple Fabric Box

PDF download Download Article
PDF download Download Article

Fabric boxes are a great way to store craft supplies and present gifts. You can always buy them from the store, but why not make your own? It is quite simple, but the results are stunning. Best of all, the possibilities for color, pattern, and design are endless! When you are done, you can decorate the box further to match the occasion or its theme.

Method 1
Method 1 of 2:

Making a Quick Box

PDF download Download Article
  1. Use a square cut out of thin cardboard to trace your pattern onto your fabric and batting first. This will ensure that all of the squares are the same size. Cut the squares out using a sharp pair of fabric scissors.
    • The linen fabric will be on the inside of your box. Consider a solid color for this.
    • The cotton fabric will be on the outside. Consider a coordinating pattern for this.
    • Use thin batting. If you can't find any, iron fusible interfacing to the wrong side of your cotton fabric.
  2. Set the batting down first. Place the linen fabric on top, right side up. Set the cotton fabric down last, wrong side up. It may look weird now, but it will look fine once you turn everything inside out. [1]
    Advertisement
  3. Sew around all four edges using a ¼-inch (0.64-centimeter) seam allowance. Leave a 1 ½ to 2-inch (3.81 to 5.08-centimeter) gap along one of the edges so that you can turn the square inside out. [2]
    • Pin the fabric and batting together with sewing pins first, if necessary. Be sure to remove the pins when you are done.
  4. This ensures that your box will have nice, sharp corners. Start by cutting straight across the corners, close to the stitching. Then, cut the seams to either side of the corner at angles to make it narrower. This will help further reduce bulk.
  5. Keep the linen and batting together as you turn the fabric. This way, you will have the linen fabric on one side and the cotton on the other. The batting will be sandwiched in between.
    • Use something long and slender, like a knitting needle, to push the corners out.
  6. Use the cotton setting on the cotton side. Flip the fabric over, and iron it again. This time, use the linen setting, if your iron has one. Ironing the square will get rid of any wrinkles and make the next step easier.
    • Be sure to tuck in the seams from the gap nicely. Use sewing pins to keep the gap closed, if necessary.
  7. Use a ⅛-inch (0.32-centimeter) seam allowance. Be sure to go over the gap that you left earlier. [3] Backstitch at the start and end of your sewing a few times so that the stitching doesn't come undone.
    • Use a thread color that matches your cotton, and a bobbin color that matches your linen.
    • Consider using a contrasting thread and bobbin color. This will make the top stitching part of the design!
  8. The square will make the base of your box. The larger your square is, the shorter your box will be. The smaller your square is, the taller you box will be.
    • For a perfect cube, measure your fabric, and divide it by three. Draw a square in the center according to those measurements.
  9. [4] You can use a matching thread color or a contrasting one. The stitching will help the box "fold" properly. Remember to backstitch at the start and end of your sewing!
    • Remove the ink or chalk by gently wiping it with a damp cloth.
  10. Take the two bottom left edges and fold them together so that they touch. Use an embroidery needle and some embroidery thread to stitch the edges together, ½ inch (1.27 centimeters) from the corner. Repeat this step for the remaining three corners. [5]
    • You can also glue the corners together with a drop of hot glue or fabric glue. If you use fabric glue, secure the corners with clothespins until the glue dries.
    • You can match the embroidery thread to your fabric, or use a contrasting color for a hint of design.
    11. Advertisement


Method 2
Method 2 of 2:

Making a Traditional Box

PDF download Download Article
  1. Choose two different colors or patterns of cotton fabric. You can use solid colors, patterns, or a combination of the two. Stack everything together, and cut a 15-inch (38.1-centimeter) square out.
    • Make sure that the two fabrics go well together. One of them will be your main fabric and the other will be your lining.
  2. Follow the instructions that came with your interfacing as each brand will be different. In general, you will need to: pin the interfacing to the wrong side of the fabric, cover it with an ironing cloth, and iron it for 10 to 15 seconds with an iron. Use the coolest setting you can and no steam.
  3. Stack your main fabric and lining together. Trace a 4½-inch (11.43-centimeter) square into each corner. Cut the squares out using a pair of fabric scissors. You will end up with something that looks like a + sign.
    • To ensure that each square is the same size, use a template cut out of thin cardboard.
    • Discard the squares that you cut out, or save them for another project.
  4. Place the main fabric down with the right side facing you. Bring the left and bottom flaps together, and pin them along the edge. Repeat with the remaining flaps until you have a box.
    • Repeat this step with the lining fabric.
  5. Sew the main fabric first, then the lining. Do not stitch the two boxes together just yet.
  6. Turn your main fabric box so that the bottom is facing you. Snip the hems at the bottom of each corner. Be careful not to cut through the stitching.
    • Repeat with step with the lining.
  7. Turn the main fabric box right side out. Tuck it inside the lining box. The right sides of both boxes should be touching. You should only see the interfacing and the wrong side of the lining.
  8. Pin the box together along the top edge. Sew along the top edge using a ¼-inch (0.64-centimeter) seam allowance. Leave a few inch/centimeter wide gap for turning.
  9. When you are done, push the box back into shape. Tuck the lining into the main box, and push out the corners.
  10. Set the box down on its side on the ironing board. Press the top hem with an iron. Turn the box onto its other side, and iron it again. Keep doing this until you have ironed all four sides.
    • Tuck the hem in at the gap neatly. Keep the opening shut with sewing pins if you need to.
  11. Be sure to backstitch at the start and end of your sewing so that the stitching doesn't come undone. Be sure that you match your thread and bobbin colors to your main and lining fabric colors.
    • Consider using a contrasting thread color for the top stitching. This will make it part of the design!
  12. 12
    Finished.
    14. Advertisement


Expert Q&A

Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      Show More Tips
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Things You'll Need

      Quick Box

      • Cotton fabric
      • Linen fabric
      • Batting
      • Thread
      • Sewing machine
      • Fabric scissors
      • Dressmaker's chalk or pen
      • Embroidery thread
      • Embroidery needle
      • Sewing pins

      Traditional Box

      • Fabric (2 different colors or patterns)
      • Fusible interfacing
      • Thread
      • Sewing machine
      • Fabric scissors
      • Sewing pins


      You Might Also Like

      How to
      Cover a Ball with Fabric for Craft Projects
      How to
      Make a Yarn Pompom
      How to
      Paint Mugs
      How to
      Hang Up Artwork Using Picture Frame Wire
      How to
      Make Photo Mugs
      How to
      Make a Button Pin
      How to
      Make Lampshades
      How to
      Make a Pom Pom
      How to
      Recover Lampshades
      How to
      Make a Trophy
      How to
      Fit a Lampshade
      How to
      Make a Mobile
      How to
      Decorate a Flower Vase with a Ribbon
      How to
      Paint Glass Lamp Shades
      Advertisement

      References

      1. ↑ http://aspoonfulofsugardesigns.com/2015/05/charm-square-fabric-tray/
      2. ↑ http://aspoonfulofsugardesigns.com/2015/05/charm-square-fabric-tray/
      3. ↑ http://aspoonfulofsugardesigns.com/2015/05/charm-square-fabric-tray/
      4. ↑ http://aspoonfulofsugardesigns.com/2015/05/charm-square-fabric-tray/
      5. ↑ http://aspoonfulofsugardesigns.com/2015/05/charm-square-fabric-tray/

      About This Article

      Thanks to all authors for creating a page that has been read 39,099 times.

      Reader Success Stories

      • Anonymous

        Jul 30, 2017

        "It gives me an idea of the correct measurements."
      Share your story

      Did this article help you?

      Advertisement