Download Article
Download Article
Making a staff for use in the woods or for use in magical rituals can be a fun project. Once you've found a stick that seems appropriate for your purpose, you can learn to carefully prepare it and tailor it to whatever use you've got in mind. Want to have a helpful walking stick? Want to LARP with your friends? Want to perform pagan rituals? We've got you covered with the various methods in this article.
Steps
-
Collect dead wood of the appropriate height. For a good walking stick, you want dead wood that's got some heft to it, but is still lightweight enough to carry comfortably. The ideal piece should come up to your chin, though you may want a longer or shorter walking stick depending on your preference. It should be relatively straight, and relatively uniform in thickness, at least an inch or two in diameter. [1] X Research source- Green wood is too bendable to be effective as a walking or survival stick, so only collect dead wood to make for possible staffs. If you find a very desirable branch that you'd like to use, but it's too green, cut it and whittle it to debark it, but let it dry outdoors for several weeks before treating it and finishing.
-
Look for hickory or ash . Any wood that feels comfortable to you is appropriate, but many people prefer the lightness and strength of hickory and ash, as well as the availability. Keep an eye out for good branches while you're out on hikes, of the appropriate size, and a variety of wood that'll hold up to heavy use. Research good woods in your area that are commonly used for hiking sticks. Other woods that make good walking sticks include: [2] X Research source- Vine maple
- Ironwood
- Salt cedar
- Aspen
Advertisement -
Remove bark and notches. Use a sharp pocket knife to whittle off the bark, taking extra care to smooth out any tiny branch notches or uneven places. Round up the ends of the stick by making tiny cuts to achieve a durable and clean finish to the end pieces.- After cleaning up your branch, let it sit for a few days to make sure it's thoroughly dried out. If an orangish skin starts to form on the inner flesh of the wood, that's water escaping. Scrape it off again and let it continue sitting for a while until it remains a whitish color after several days.
-
Seal with stain . If you want to give your staff a clean and durable finish, stain it with a good wood finish or wiping stain. Typically, you'll do a few coats, wiping on a thin layer evenly, then wiping it off and applying more layers. Do at least 3, and do more coats if you want to achieve a darker finish to your staff. Follow the instruction on the particular brand you purchase.- Alternatively, some choose to woodburn, or do pyrography designs on their walking staff before sealing it. Choose a distinctive design that you like, if you want to give your staff some character, and burn it on.
-
Add survival features to your walking staff. Some hikers and survivalists like to wrap a length of par cord Paracord around the staff to use as a grip, and electrical tape a couple of fish-hooks or other implements under it. You might also include carabiners for other attachments, like water bottles, knives, and other survival gear. Consider fashioning a leather grip and binding it to the staff to make the hand-grip more comfortable. [3] X Research source- On the lower third or so of your staff, notch a series of inch-measurements to use for tracking or to measure the depth of water as you hike.
Advertisement
-
Collect wood after a storm. Many wiccans and other neo-pagans believe that wood felled by a storm is imbued with supernatural powers. Whether or not that's true, it's also just a good way of collecting wood. Head out to the woods after a particularly windy storm to look for pieces of wood that speak to you. [4] X Research source -
Select a stick with significance. In magic, staffs are traditionally symbolic of male energy and are often linked to the wind and sun. Often, they're made of hickory or oak, significant for their strength and durability, but a magic staff can be made from any kind of wood that feels right in your hands. It's something you're going to be using for your own practice, so it's important to get something that feels right, and seems significant to you, for whatever reason. [5] X Research source- When you find a prospective staff, sit with it. Hold it in your hands. Try to get a feel for its energy. When you hold the right one, you'll know it. Ideally, your staff will be 3–5 feet (0.9–1.5 m) in length.
-
Smooth and clean the staff. Use a knife and sandpaper to remove the bark and smooth the surface of the wood. Use long even cuts with a very sharp knife to keep the staff as clean and smooth-looking as possible. Be very careful while using the knife. Let your staff dry thoroughly and remove any orangish bark that builds up as it rests. -
Charge or bless the staff . Depending on your practice, you may have a particular ceremony appropriate for the purpose or charging an object or blessing it in preparation for magic. Light candles, cleanse the area, cast a circle , do whatever needs to be done to prepare for the ritual.- When meditating, consider the natural elements, the earth, sunlight, and water that went into the creation of the tree that yielded this staff that you'll use. Thank the tree and meditate on its gift. [6] X Research source
-
Consider pyrographing important symbols into the wood. Pyrography is done by heating a metal object, usually a needle or even a soldering iron, and burning patterns into the raw wood. On a magic staff, this can be particularly useful as a way of imbuing it with symbolic powers.- Generally, you'll want to avoid artificial sealants and finishes on your magic staff. Some practitioners believe this can limit the power of your staff by restricting the natural properties of the wood. To be on the safe side, leave it unsealed.
-
Adorn the top of the staff with a charged stone or crystal of significance to you. It may be advantageous to adorn the top of your staff with a similarly-charged or related crystal or other gem to make your staff more powerful. If you wish to do so, carve a small diver into the top of your staff and smooth it to the shape of the gem you hope to place atop it.- Don't glue or otherwise permanently bind it to the staff. Instead, lash it with leather thongs or bindings, to remove it for particular uses if necessary.
Advertisement
-
Buy dowels of the appropriate length and thickness. If you want to make cool-looking costume staves for live action roll playing or cosplay, wooden dowels, available at any hardware store, are the perfect choice. They're already uniform and clean, available in many lengths and widths. Other options for the base of your staff include:- Old broom or mop handles
- Broken hockey sticks
- Axe handles
- Shovel handles
- Curtain rods
- PVC pipe
-
Wrap your staff with electrical tape. Red and black work best to give your wizard's staff a cool and metallic finish. It'll look like something other than what it is, which is the idea. For a cool effect, do a base wrap with black tape and then wrap red electrical tape winding down the staff, like a devious serpent or dripping blood. -
Find a crystal ball for the top of your staff. No staff would be complete without a gazing ball atop it. For a cool effect, look for small bouncy balls in the toys section at the store, or check out other kinds of lightweight balls that would look appropriate. Some are streaked with psychedelic colors that would be perfect for a staff.- If you want to change the color, get some spray paint and paint it carefully outside, making sure you're in a well-ventilated area and have adult supervision.
- At the top of your staff, you might also want to hang scarves or other decorations to complete the kind of staff you want. Get creative and go crazy.
-
Create a handgrip from leather or electrical tape. To make sure you've got a good grip on your staff while you're on the battlefield, it's a good idea to fashion something to hold onto. If you've got an old football lying around, cut the seams apart and use one of the individual diamond-shaped sections to fashion a leather-like wrap-around grip that you can hold onto. Sew it together with twine for a perfect rustic-finish.- Alternatively, you could get another color of electrical tape and wrap around the area several times to get a hand-shaped place to hold.
Advertisement
Expert Q&A
Search
-
QuestionHow do I make a walking staff?Anthony Porter is a nature educator, archer, and outdoorsman based in South Lake Tahoe, California. He is an Outdoor Survival expert, and educates millions around the world through his social media presence as “Outdoor Anthony”. His videos have turned him into a viral sensation on TikTok & Instagram, where he has over 400k followers. He is the current Communications Director of the Tahoe Rim Trail Association, promoting wildlife stewardship and preservation on print media, TV, and radio. Anthony has also showcased his outdoor prowess as a recurring yearly TV athlete as NBC's the Archery Ninja on American Ninja Warrior. He is also the producer, editor and Host of the Orangutan Podcast, discussing rainforest conservation initiatives with Dr. Gary Shapiro, famous for teaching orangutans symbolic sign language. As a professional educator for the better part of a decade, Anthony has explored 20 countries, and has taught people of all ages across the United States. He received a Bachelor’s degree in Parks and Recreation Management from Northern Arizona University, and earned an MBA from Cal Poly Pomona with a concentration in sustainable Marketing, and is always looking to dive right into the next adventure.First, find a branch that’s about your shoulder height and sturdy. Hardwoods like oak, maple, or hickory are best because they’re strong. Pick one with as few knots and cracks as possible. When you get the branch home, use a knife to peel off the bark. This makes it look better and helps prevent moisture buildup that can cause rot. Sand the branch until it’s smooth to avoid splinters, and round off any sharp edges, especially where your hand will grip it. To finish, apply wood sealant or oil to protect it from the weather and help it last longer. If you want a better grip, you can wrap the handle area with paracord or leather strips. Test your stick by leaning onto it, and make sure it feels comfortable and sturdy.
-
QuestionCan there be a combination of a survival staff and a magical staff?Community AnswerYes, there's no reason why not. In fact, using a hiking staff in rituals could help imbue your magic with an extra bit of durability and endurance magics.
-
QuestionWhere can I get a large enough, but cheap enough, stone for my staff? I've tried looking online, but I can't find one. I'm not fussy about colors or types, just as long as it is around 4-6 inches.UltraboyCommunity AnswerTry finding one on the beach. Often there may be a cliff with some quartz nearby. You could get it out with a hammer and decorate it appropriately according to your preference.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Warnings
- Be very careful using a knife when you're stripping the bark off your stick. The knife needs to be very sharp to do the job properly, so it can be quite dangerous. Ask a parent to do it for you, if necessary.Thanks
Advertisement
Things You'll Need
- A stick
- a ball or rock
- a knife (optional)
Expert Interview
Thanks for reading our article! If you’d like to learn more about outdoor recreation and survival, check out our in-depth interview with Anthony Porter .
References
- ↑ https://www.youtube.com/watch?v=A7AmRIS8wL8
- ↑ https://www.youtube.com/watch?v=A7AmRIS8wL8
- ↑ https://boyslife.org/hobbies-projects/projects/1108/take-a-hike/
- ↑ https://www.youtube.com/watch?v=Fw6C13W2xf8
- ↑ https://www.youtube.com/watch?v=Fw6C13W2xf8
- ↑ http://www.spellsofmagic.com/spells/unclassified_spells/unclassified_spells/8224/page.html
About This Article
Article Summary
X
To make a staff to use when you're hiking, choose deadwood that's fairly straight and uniform in thickness. Chin-height is a good length, and something between 1-2 inches in diameter is ideal. Next, use a sharp pocket knife to whittle off the bark and smooth out notches and uneven areas. Then, round off the ends to achieve a durable and clean finish. Finally, seal it with stain and hit the hiking trail! To learn more about making staffs for magical or LARPing purposes, read on!
Did this summary help you?
Thanks to all authors for creating a page that has been read 137,765 times.
Reader Success Stories
- "Thanks! I'm making a cross between a survival stick and a magic staff, so this really helped me."
Advertisement
100%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
"Thanks! I'm making a cross between a survival stick and a magic staff, so this really helped me."
"I made the best magic/LARP staff ever. Without the tips I never would have done it!"
"I used this for a Morgan Le Fay cosplay and it worked perfectly!"
"It helps. Clear instructions, simple steps, good stuff."
"The ritual is kinda fun. I can also control the wind."
