How to Make a Vacuum Chamber

PDF download Download Article
PDF download Download Article

Building a vacuum chamber gives you a fun way to do experiments at home, as well as do things like degas silicone or stabilize brittle wood. For a simple vacuum chamber to conduct a few small experiments, try a mason jar version with a vacuum pump. While this will create a vacuum chamber, it won't be very high-powered. For a better version that's a bit more complicated, make one out of a pressure cooker pot and an acrylic lid connected to a vacuum pump.

Method 1
Method 1 of 3:

Using a Mason Jar and Vacuum Pump

PDF download Download Article
  1. {"smallUrl":"https:\/\/www.wikihow.com\/images\/thumb\/1\/14\/Make-a-Vacuum-Chamber-Step-1.jpg\/v4-460px-Make-a-Vacuum-Chamber-Step-1.jpg","bigUrl":"\/images\/thumb\/1\/14\/Make-a-Vacuum-Chamber-Step-1.jpg\/aid8534158-v4-728px-Make-a-Vacuum-Chamber-Step-1.jpg","smallWidth":460,"smallHeight":345,"bigWidth":728,"bigHeight":546,"licensing":"<div class=\"mw-parser-output\"><p>\u00a9 2024 wikiHow, Inc. All rights reserved. wikiHow, Inc. is the copyright holder of this image under U.S. and international copyright laws. This image is <b>not<\/b> licensed under the Creative Commons license applied to text content and some other images posted to the wikiHow website. This image may not be used by other entities without the express written consent of wikiHow, Inc.<br>\n<\/p><p><br \/>\n<\/p><\/div>"}
    Place the mason jar lid on a flat surface. Set the rubber stopper on top of the mason jar lid. Use a permanent marker to draw around the rubber stopper, marking where you'll need to cut. [1]
  2. {"smallUrl":"https:\/\/www.wikihow.com\/images\/thumb\/0\/0c\/Make-a-Vacuum-Chamber-Step-2.jpg\/v4-460px-Make-a-Vacuum-Chamber-Step-2.jpg","bigUrl":"\/images\/thumb\/0\/0c\/Make-a-Vacuum-Chamber-Step-2.jpg\/aid8534158-v4-728px-Make-a-Vacuum-Chamber-Step-2.jpg","smallWidth":460,"smallHeight":345,"bigWidth":728,"bigHeight":546,"licensing":"<div class=\"mw-parser-output\"><p>\u00a9 2024 wikiHow, Inc. All rights reserved. wikiHow, Inc. is the copyright holder of this image under U.S. and international copyright laws. This image is <b>not<\/b> licensed under the Creative Commons license applied to text content and some other images posted to the wikiHow website. This image may not be used by other entities without the express written consent of wikiHow, Inc.<br>\n<\/p><p><br \/>\n<\/p><\/div>"}
    You may need to punch a hole first with a nail and hammer, then cut it out with the tin snips. Go around the inside of the line you traced, as you want the stopper to fit snugly. [2]
    • If your stopper is small enough, you can also use a drill to make the hole. Place the lid on a flat surface you don't mind drilling into, and clamp it in place. Turn the drill on. Apply gentle pressure until the drill bit goes through the lid.
    Advertisement
  3. {"smallUrl":"https:\/\/www.wikihow.com\/images\/thumb\/a\/aa\/Make-a-Vacuum-Chamber-Step-3.jpg\/v4-460px-Make-a-Vacuum-Chamber-Step-3.jpg","bigUrl":"\/images\/thumb\/a\/aa\/Make-a-Vacuum-Chamber-Step-3.jpg\/aid8534158-v4-728px-Make-a-Vacuum-Chamber-Step-3.jpg","smallWidth":460,"smallHeight":345,"bigWidth":728,"bigHeight":546,"licensing":"<div class=\"mw-parser-output\"><p>\u00a9 2024 wikiHow, Inc. All rights reserved. wikiHow, Inc. is the copyright holder of this image under U.S. and international copyright laws. This image is <b>not<\/b> licensed under the Creative Commons license applied to text content and some other images posted to the wikiHow website. This image may not be used by other entities without the express written consent of wikiHow, Inc.<br>\n<\/p><p><br \/>\n<\/p><\/div>"}
    Shove the stopper in the hole in the lid until it fits tightly. If the nozzle of your vacuum pump can go through without a hole, just push it in. Otherwise, use an awl, ice pick, or screwdriver to dig out a hole big enough for the nozzle. [3]
    • However, make sure the hole is JUST big enough for the nozzle. Don't leave any extra space.
  4. {"smallUrl":"https:\/\/www.wikihow.com\/images\/thumb\/6\/68\/Make-a-Vacuum-Chamber-Step-4.jpg\/v4-460px-Make-a-Vacuum-Chamber-Step-4.jpg","bigUrl":"\/images\/thumb\/6\/68\/Make-a-Vacuum-Chamber-Step-4.jpg\/aid8534158-v4-728px-Make-a-Vacuum-Chamber-Step-4.jpg","smallWidth":460,"smallHeight":345,"bigWidth":728,"bigHeight":546,"licensing":"<div class=\"mw-parser-output\"><p>\u00a9 2024 wikiHow, Inc. All rights reserved. wikiHow, Inc. is the copyright holder of this image under U.S. and international copyright laws. This image is <b>not<\/b> licensed under the Creative Commons license applied to text content and some other images posted to the wikiHow website. This image may not be used by other entities without the express written consent of wikiHow, Inc.<br>\n<\/p><p><br \/>\n<\/p><\/div>"}
    Connect up your vacuum chamber to the vacuum pump. Make sure the nozzle fits snugly in the rubber stopper.
    • Find vacuum pumps at your local hardware store or online. [4]
  5. {"smallUrl":"https:\/\/www.wikihow.com\/images\/thumb\/7\/73\/Make-a-Vacuum-Chamber-Step-5.jpg\/v4-460px-Make-a-Vacuum-Chamber-Step-5.jpg","bigUrl":"\/images\/thumb\/7\/73\/Make-a-Vacuum-Chamber-Step-5.jpg\/aid8534158-v4-728px-Make-a-Vacuum-Chamber-Step-5.jpg","smallWidth":460,"smallHeight":345,"bigWidth":728,"bigHeight":546,"licensing":"<div class=\"mw-parser-output\"><p>\u00a9 2024 wikiHow, Inc. All rights reserved. wikiHow, Inc. is the copyright holder of this image under U.S. and international copyright laws. This image is <b>not<\/b> licensed under the Creative Commons license applied to text content and some other images posted to the wikiHow website. This image may not be used by other entities without the express written consent of wikiHow, Inc.<br>\n<\/p><p><br \/>\n<\/p><\/div>"}
    Use a steady stream of glue on the outside edge of the stopper, going all the way around. Make sure the glue gets down in the crack between the stopper and the lid. [5]
    • A fast-acting glue works best.
  6. {"smallUrl":"https:\/\/www.wikihow.com\/images\/thumb\/5\/5a\/Make-a-Vacuum-Chamber-Step-6.jpg\/v4-460px-Make-a-Vacuum-Chamber-Step-6.jpg","bigUrl":"\/images\/thumb\/5\/5a\/Make-a-Vacuum-Chamber-Step-6.jpg\/aid8534158-v4-728px-Make-a-Vacuum-Chamber-Step-6.jpg","smallWidth":460,"smallHeight":345,"bigWidth":728,"bigHeight":546,"licensing":"<div class=\"mw-parser-output\"><p>\u00a9 2024 wikiHow, Inc. All rights reserved. wikiHow, Inc. is the copyright holder of this image under U.S. and international copyright laws. This image is <b>not<\/b> licensed under the Creative Commons license applied to text content and some other images posted to the wikiHow website. This image may not be used by other entities without the express written consent of wikiHow, Inc.<br>\n<\/p><p><br \/>\n<\/p><\/div>"}
    You can use things such as a marshmallow or a tied-off balloon that has a tiny bit of air in it to experiment with your chamber. Put the item in the mason jar, and screw the lid on tightly. [6]
    • Use an item that's only about 1/3 to 1/4 the size of the jar, as it will likely expand in the vacuum.
  7. {"smallUrl":"https:\/\/www.wikihow.com\/images\/thumb\/7\/78\/Make-a-Vacuum-Chamber-Step-7.jpg\/v4-460px-Make-a-Vacuum-Chamber-Step-7.jpg","bigUrl":"\/images\/thumb\/7\/78\/Make-a-Vacuum-Chamber-Step-7.jpg\/aid8534158-v4-728px-Make-a-Vacuum-Chamber-Step-7.jpg","smallWidth":460,"smallHeight":345,"bigWidth":728,"bigHeight":546,"licensing":"<div class=\"mw-parser-output\"><p>\u00a9 2024 wikiHow, Inc. All rights reserved. wikiHow, Inc. is the copyright holder of this image under U.S. and international copyright laws. This image is <b>not<\/b> licensed under the Creative Commons license applied to text content and some other images posted to the wikiHow website. This image may not be used by other entities without the express written consent of wikiHow, Inc.<br>\n<\/p><p><br \/>\n<\/p><\/div>"}
    Put the nozzle in the rubber stopper, making sure it is tight and secure. Turn on the vacuum pump to remove the air. Once it is out, turn off the pump immediately. [7]
    • If you try to keep pumping air, you could damage the pump.
    • You can even just use a reversed bike pump to pull out the air for a simpler vacuum.
    8. Advertisement


Method 2
Method 2 of 3:

Making a Lid for a Cooking Pot Pressure Cooker

PDF download Download Article
  1. {"smallUrl":"https:\/\/www.wikihow.com\/images\/thumb\/8\/8a\/Make-a-Vacuum-Chamber-Step-8.jpg\/v4-460px-Make-a-Vacuum-Chamber-Step-8.jpg","bigUrl":"\/images\/thumb\/8\/8a\/Make-a-Vacuum-Chamber-Step-8.jpg\/aid8534158-v4-728px-Make-a-Vacuum-Chamber-Step-8.jpg","smallWidth":460,"smallHeight":345,"bigWidth":728,"bigHeight":546,"licensing":"<div class=\"mw-parser-output\"><p>\u00a9 2024 wikiHow, Inc. All rights reserved. wikiHow, Inc. is the copyright holder of this image under U.S. and international copyright laws. This image is <b>not<\/b> licensed under the Creative Commons license applied to text content and some other images posted to the wikiHow website. This image may not be used by other entities without the express written consent of wikiHow, Inc.<br>\n<\/p><p><br \/>\n<\/p><\/div>"}
    You don't actually need the lid from the pot. However, pressure cooker pots are stronger than standard cooking pots, so they will hold up better to the vacuum. [8]
    • You can use a regular stainless steel pot, though make sure it's sturdy enough. [9] If you want to use a regular pot, try pushing on the side of it. If you can push it in at all, it's too soft for a vacuum chamber.
  2. {"smallUrl":"https:\/\/www.wikihow.com\/images\/thumb\/5\/52\/Make-a-Vacuum-Chamber-Step-9.jpg\/v4-460px-Make-a-Vacuum-Chamber-Step-9.jpg","bigUrl":"\/images\/thumb\/5\/52\/Make-a-Vacuum-Chamber-Step-9.jpg\/aid8534158-v4-728px-Make-a-Vacuum-Chamber-Step-9.jpg","smallWidth":460,"smallHeight":345,"bigWidth":728,"bigHeight":546,"licensing":"<div class=\"mw-parser-output\"><p>\u00a9 2024 wikiHow, Inc. All rights reserved. wikiHow, Inc. is the copyright holder of this image under U.S. and international copyright laws. This image is <b>not<\/b> licensed under the Creative Commons license applied to text content and some other images posted to the wikiHow website. This image may not be used by other entities without the express written consent of wikiHow, Inc.<br>\n<\/p><p><br \/>\n<\/p><\/div>"}
    The acrylic needs to be at least 3 ⁄ 4  in (1.9 cm) so it doesn't crack. Use a permanent marker to trace the shape on the paper side of the acrylic. [10]
  3. {"smallUrl":"https:\/\/www.wikihow.com\/images\/thumb\/3\/35\/Make-a-Vacuum-Chamber-Step-10.jpg\/v4-460px-Make-a-Vacuum-Chamber-Step-10.jpg","bigUrl":"\/images\/thumb\/3\/35\/Make-a-Vacuum-Chamber-Step-10.jpg\/aid8534158-v4-728px-Make-a-Vacuum-Chamber-Step-10.jpg","smallWidth":460,"smallHeight":345,"bigWidth":728,"bigHeight":546,"licensing":"<div class=\"mw-parser-output\"><p>\u00a9 2024 wikiHow, Inc. All rights reserved. wikiHow, Inc. is the copyright holder of this image under U.S. and international copyright laws. This image is <b>not<\/b> licensed under the Creative Commons license applied to text content and some other images posted to the wikiHow website. This image may not be used by other entities without the express written consent of wikiHow, Inc.<br>\n<\/p><p><br \/>\n<\/p><\/div>"}
    Make the new circle about 1 ⁄ 4 inch (0.64 cm) bigger than the smaller circle all the way around. It's fine if it's even a little bigger than that. You just need a big circle wide enough to cover the whole pot. [11]
  4. {"smallUrl":"https:\/\/www.wikihow.com\/images\/thumb\/5\/5f\/Make-a-Vacuum-Chamber-Step-11.jpg\/v4-460px-Make-a-Vacuum-Chamber-Step-11.jpg","bigUrl":"\/images\/thumb\/5\/5f\/Make-a-Vacuum-Chamber-Step-11.jpg\/aid8534158-v4-728px-Make-a-Vacuum-Chamber-Step-11.jpg","smallWidth":460,"smallHeight":345,"bigWidth":728,"bigHeight":546,"licensing":"<div class=\"mw-parser-output\"><p>\u00a9 2024 wikiHow, Inc. All rights reserved. wikiHow, Inc. is the copyright holder of this image under U.S. and international copyright laws. This image is <b>not<\/b> licensed under the Creative Commons license applied to text content and some other images posted to the wikiHow website. This image may not be used by other entities without the express written consent of wikiHow, Inc.<br>\n<\/p><p><br \/>\n<\/p><\/div>"}
    Clamp the acrylic to the table so it stays in place while you're cutting. Leave the circle you want to cut over the edge of the table so you can cut it with the jigsaw. [12]
    • To cut it, set the jigsaw on the edge of the acrylic and turn it on. Push it into the acrylic until you meet the edge of the circle, then follow the circle around. Always push the jigsaw away from you; don't cut towards yourself.
  5. {"smallUrl":"https:\/\/www.wikihow.com\/images\/thumb\/e\/e7\/Make-a-Vacuum-Chamber-Step-12.jpg\/v4-460px-Make-a-Vacuum-Chamber-Step-12.jpg","bigUrl":"\/images\/thumb\/e\/e7\/Make-a-Vacuum-Chamber-Step-12.jpg\/aid8534158-v4-728px-Make-a-Vacuum-Chamber-Step-12.jpg","smallWidth":460,"smallHeight":345,"bigWidth":728,"bigHeight":546,"licensing":"<div class=\"mw-parser-output\"><p>\u00a9 2024 wikiHow, Inc. All rights reserved. wikiHow, Inc. is the copyright holder of this image under U.S. and international copyright laws. This image is <b>not<\/b> licensed under the Creative Commons license applied to text content and some other images posted to the wikiHow website. This image may not be used by other entities without the express written consent of wikiHow, Inc.<br>\n<\/p><p><br \/>\n<\/p><\/div>"}
    You can put the hole anywhere you want in the acrylic, but near the edge is probably better, so you can see what's going on inside. However, make sure to put it at least 1 inch (2.5 cm) inside the edge of the acrylic so you don't affect the seal. Drill on the paper side of the acrylic. [13]
    • Peel the paper off the acrylic when you're done.
  6. {"smallUrl":"https:\/\/www.wikihow.com\/images\/thumb\/8\/8c\/Make-a-Vacuum-Chamber-Step-13.jpg\/v4-460px-Make-a-Vacuum-Chamber-Step-13.jpg","bigUrl":"\/images\/thumb\/8\/8c\/Make-a-Vacuum-Chamber-Step-13.jpg\/aid8534158-v4-728px-Make-a-Vacuum-Chamber-Step-13.jpg","smallWidth":460,"smallHeight":345,"bigWidth":728,"bigHeight":546,"licensing":"<div class=\"mw-parser-output\"><p>\u00a9 2024 wikiHow, Inc. All rights reserved. wikiHow, Inc. is the copyright holder of this image under U.S. and international copyright laws. This image is <b>not<\/b> licensed under the Creative Commons license applied to text content and some other images posted to the wikiHow website. This image may not be used by other entities without the express written consent of wikiHow, Inc.<br>\n<\/p><p><br \/>\n<\/p><\/div>"}
    A tap makes the ridges for a screw, and this one will make the ones you need to attach the vacuum tube to the acrylic. Insert the tap with the ridges into the hole you just made, and use pliers to twist it down into the hole. [14]
    • Remember to twist to the right.
    • "NPT" stands for "national pipe thread."
    • Once you've screwed it in, take it back out. You're just making threads in the hole.
  7. 7
    Make a batch of proto putty from silicone and cornstarch. Start by squirting some liquid food coloring in a bowl; this makes the putty colorful, but the moisture also helps activate the silicone. Pour in enough silicone 1 caulk (100% silicone) to make enough putty for a large band that will go all the way around the lid. Mix the two together with a popsicle stick. Work quickly, as this will set in about 10 minutes or less. [15]
    • In a second bowl, pour in enough cornstarch to mostly fill the bowl. Dump the silicone and food coloring mixture into the bowl, and use your hands (with gloves on) to mix the silicone into the cornstarch.
    • Coat the silicone with cornstarch to keep it from sticking. Knead the mixture for about 2 minutes, adding cornstarch if it feels sticky. [16]
  8. {"smallUrl":"https:\/\/www.wikihow.com\/images\/thumb\/d\/df\/Make-a-Vacuum-Chamber-Step-15.jpg\/v4-460px-Make-a-Vacuum-Chamber-Step-15.jpg","bigUrl":"\/images\/thumb\/d\/df\/Make-a-Vacuum-Chamber-Step-15.jpg\/aid8534158-v4-728px-Make-a-Vacuum-Chamber-Step-15.jpg","smallWidth":460,"smallHeight":345,"bigWidth":728,"bigHeight":546,"licensing":"<div class=\"mw-parser-output\"><p>\u00a9 2024 wikiHow, Inc. All rights reserved. wikiHow, Inc. is the copyright holder of this image under U.S. and international copyright laws. This image is <b>not<\/b> licensed under the Creative Commons license applied to text content and some other images posted to the wikiHow website. This image may not be used by other entities without the express written consent of wikiHow, Inc.<br>\n<\/p><p><br \/>\n<\/p><\/div>"}
    Place the rope on top of the rim of the pot, going all the way around. Press it down lightly with your fingers to set in place, then put the acrylic circle in place on top of it. Press down on the acrylic so that it squishes the dough out until it's flat, forming a seal with the acrylic. [17]
    • Leave it to set for about 10 minutes, and it should form a rubber-like seal around the top of the pot. You can now peel the lid and the proto putty away from the pot as needed, then put it back in place.
    9. Advertisement


Method 3
Method 3 of 3:

Attaching the Pot to the Vacuum Pump

PDF download Download Article
  1. {"smallUrl":"https:\/\/www.wikihow.com\/images\/thumb\/c\/c5\/Make-a-Vacuum-Chamber-Step-16.jpg\/v4-460px-Make-a-Vacuum-Chamber-Step-16.jpg","bigUrl":"\/images\/thumb\/c\/c5\/Make-a-Vacuum-Chamber-Step-16.jpg\/aid8534158-v4-728px-Make-a-Vacuum-Chamber-Step-16.jpg","smallWidth":460,"smallHeight":345,"bigWidth":728,"bigHeight":546,"licensing":"<div class=\"mw-parser-output\"><p>\u00a9 2024 wikiHow, Inc. All rights reserved. wikiHow, Inc. is the copyright holder of this image under U.S. and international copyright laws. This image is <b>not<\/b> licensed under the Creative Commons license applied to text content and some other images posted to the wikiHow website. This image may not be used by other entities without the express written consent of wikiHow, Inc.<br>\n<\/p><p><br \/>\n<\/p><\/div>"}
    Wrap the threads of each fitting in thread tape . Wrapping the threads increases the seal. You need to have a good seal to create a vacuum.
  2. {"smallUrl":"https:\/\/www.wikihow.com\/images\/thumb\/a\/a0\/Make-a-Vacuum-Chamber-Step-17.jpg\/v4-460px-Make-a-Vacuum-Chamber-Step-17.jpg","bigUrl":"\/images\/thumb\/a\/a0\/Make-a-Vacuum-Chamber-Step-17.jpg\/aid8534158-v4-728px-Make-a-Vacuum-Chamber-Step-17.jpg","smallWidth":460,"smallHeight":345,"bigWidth":728,"bigHeight":546,"licensing":"<div class=\"mw-parser-output\"><p>\u00a9 2024 wikiHow, Inc. All rights reserved. wikiHow, Inc. is the copyright holder of this image under U.S. and international copyright laws. This image is <b>not<\/b> licensed under the Creative Commons license applied to text content and some other images posted to the wikiHow website. This image may not be used by other entities without the express written consent of wikiHow, Inc.<br>\n<\/p><p><br \/>\n<\/p><\/div>"}
    Each of these should be 1 ⁄ 4 inch (0.64 cm) to fit the hole. Screw the nipple into the hole you made in the acrylic. Screw the cross into the part of the nipple sticking out of the acrylic. [18]
    • Use pliers to make sure these are screwed in well.
  3. {"smallUrl":"https:\/\/www.wikihow.com\/images\/thumb\/8\/8d\/Make-a-Vacuum-Chamber-Step-18.jpg\/v4-460px-Make-a-Vacuum-Chamber-Step-18.jpg","bigUrl":"\/images\/thumb\/8\/8d\/Make-a-Vacuum-Chamber-Step-18.jpg\/aid8534158-v4-728px-Make-a-Vacuum-Chamber-Step-18.jpg","smallWidth":460,"smallHeight":345,"bigWidth":728,"bigHeight":546,"licensing":"<div class=\"mw-parser-output\"><p>\u00a9 2024 wikiHow, Inc. All rights reserved. wikiHow, Inc. is the copyright holder of this image under U.S. and international copyright laws. This image is <b>not<\/b> licensed under the Creative Commons license applied to text content and some other images posted to the wikiHow website. This image may not be used by other entities without the express written consent of wikiHow, Inc.<br>\n<\/p><p><br \/>\n<\/p><\/div>"}
    These shut off-valves allow you to control the air in and out. You need one on each side of the metal cross, as one controls the air in, and one controls the air out. Use pliers to twist them into place. [19]
    • It's best to have the valve switch on top if you can manage it.
  4. {"smallUrl":"https:\/\/www.wikihow.com\/images\/thumb\/d\/db\/Make-a-Vacuum-Chamber-Step-19.jpg\/v4-460px-Make-a-Vacuum-Chamber-Step-19.jpg","bigUrl":"\/images\/thumb\/d\/db\/Make-a-Vacuum-Chamber-Step-19.jpg\/aid8534158-v4-728px-Make-a-Vacuum-Chamber-Step-19.jpg","smallWidth":460,"smallHeight":345,"bigWidth":728,"bigHeight":546,"licensing":"<div class=\"mw-parser-output\"><p>\u00a9 2024 wikiHow, Inc. All rights reserved. wikiHow, Inc. is the copyright holder of this image under U.S. and international copyright laws. This image is <b>not<\/b> licensed under the Creative Commons license applied to text content and some other images posted to the wikiHow website. This image may not be used by other entities without the express written consent of wikiHow, Inc.<br>\n<\/p><p><br \/>\n<\/p><\/div>"}
    Screw this into the top of the metal cross. Use pliers to make sure it's in tight. [20]
    • You don't absolutely need this gauge, but it will tell you how much of a vacuum you're pulling. If you're not using one, cap off the top with a fitting or use a t-fitting instead. [21]
  5. {"smallUrl":"https:\/\/www.wikihow.com\/images\/thumb\/c\/c6\/Make-a-Vacuum-Chamber-Step-20.jpg\/v4-460px-Make-a-Vacuum-Chamber-Step-20.jpg","bigUrl":"\/images\/thumb\/c\/c6\/Make-a-Vacuum-Chamber-Step-20.jpg\/aid8534158-v4-728px-Make-a-Vacuum-Chamber-Step-20.jpg","smallWidth":460,"smallHeight":345,"bigWidth":728,"bigHeight":546,"licensing":"<div class=\"mw-parser-output\"><p>\u00a9 2024 wikiHow, Inc. All rights reserved. wikiHow, Inc. is the copyright holder of this image under U.S. and international copyright laws. This image is <b>not<\/b> licensed under the Creative Commons license applied to text content and some other images posted to the wikiHow website. This image may not be used by other entities without the express written consent of wikiHow, Inc.<br>\n<\/p><p><br \/>\n<\/p><\/div>"}
    A 1 ⁄ 4  in (0.64 cm) hose barb is a way of connecting the hose to the valve. Turn it into one end of a valve, tightening as you go with pliers. [22]
  6. {"smallUrl":"https:\/\/www.wikihow.com\/images\/thumb\/2\/2e\/Make-a-Vacuum-Chamber-Step-21.jpg\/v4-460px-Make-a-Vacuum-Chamber-Step-21.jpg","bigUrl":"\/images\/thumb\/2\/2e\/Make-a-Vacuum-Chamber-Step-21.jpg\/aid8534158-v4-728px-Make-a-Vacuum-Chamber-Step-21.jpg","smallWidth":460,"smallHeight":345,"bigWidth":728,"bigHeight":546,"licensing":"<div class=\"mw-parser-output\"><p>\u00a9 2024 wikiHow, Inc. All rights reserved. wikiHow, Inc. is the copyright holder of this image under U.S. and international copyright laws. This image is <b>not<\/b> licensed under the Creative Commons license applied to text content and some other images posted to the wikiHow website. This image may not be used by other entities without the express written consent of wikiHow, Inc.<br>\n<\/p><p><br \/>\n<\/p><\/div>"}
    Push the tubing over the hose barb at the end of the valve. It should just slide over it, though you may need to twist it a bit to get it all the way on. [23]
    • Choose 1 ⁄ 4 inch (0.64 cm) for the inside diameter of the tube, but make sure the walls of the tube are as thick as you can get them so the tubing doesn't collapse when you try to use the vacuum.
  7. {"smallUrl":"https:\/\/www.wikihow.com\/images\/thumb\/2\/23\/Make-a-Vacuum-Chamber-Step-22.jpg\/v4-460px-Make-a-Vacuum-Chamber-Step-22.jpg","bigUrl":"\/images\/thumb\/2\/23\/Make-a-Vacuum-Chamber-Step-22.jpg\/aid8534158-v4-728px-Make-a-Vacuum-Chamber-Step-22.jpg","smallWidth":460,"smallHeight":345,"bigWidth":728,"bigHeight":546,"licensing":"<div class=\"mw-parser-output\"><p>\u00a9 2024 wikiHow, Inc. All rights reserved. wikiHow, Inc. is the copyright holder of this image under U.S. and international copyright laws. This image is <b>not<\/b> licensed under the Creative Commons license applied to text content and some other images posted to the wikiHow website. This image may not be used by other entities without the express written consent of wikiHow, Inc.<br>\n<\/p><p><br \/>\n<\/p><\/div>"}
    Look at the diagram for your vacuum pump to determine which port will suck in the air. Unscrew the cap, and screw in a 90-degree elbow hose barb with a 1 ⁄ 4 inch (0.64 cm) diameter. This barb will allow you to rotate the hose as needed. [24]
    • Push the hose over the barbed end of the hose barb, twisting lightly to get it in.
  8. {"smallUrl":"https:\/\/www.wikihow.com\/images\/thumb\/9\/99\/Make-a-Vacuum-Chamber-Step-23.jpg\/v4-460px-Make-a-Vacuum-Chamber-Step-23.jpg","bigUrl":"\/images\/thumb\/9\/99\/Make-a-Vacuum-Chamber-Step-23.jpg\/aid8534158-v4-728px-Make-a-Vacuum-Chamber-Step-23.jpg","smallWidth":460,"smallHeight":345,"bigWidth":728,"bigHeight":546,"licensing":"<div class=\"mw-parser-output\"><p>\u00a9 2024 wikiHow, Inc. All rights reserved. wikiHow, Inc. is the copyright holder of this image under U.S. and international copyright laws. This image is <b>not<\/b> licensed under the Creative Commons license applied to text content and some other images posted to the wikiHow website. This image may not be used by other entities without the express written consent of wikiHow, Inc.<br>\n<\/p><p><br \/>\n<\/p><\/div>"}
    Turn on the vacuum pump to start pulling pressure in your chamber. Use the valve connected to the hose from the metal cross on the pot's lid to control how much air is being pulled out. The other valve lets air in when you want to stop drawing a vacuum.
    9. Advertisement

Expert Q&A

Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Things You'll Need

      Mason Jar Vacuum Chamber

      • Mason jar or pickle jar (glass)
      • Rubber stopper
      • Tin snips or drill
      • Vacuum pump
      • Items to experiment with

      Pressure Cooker Chamber

      • Cooking pot or pressure cooker pot
      • 3 ⁄ 4  in (1.9 cm)-wide crystal clear acrylic sheet, large enough to cover the pot
      • Jigsaw
      • Permanent marker
      • Clamps
      • Drill
      • 7 ⁄ 16  in (1.1 cm) drill bit
      • 1 ⁄ 4 inch (0.64 cm) NPT tap
      • Pliers
      • 3 1 ⁄ 4 inch (0.64 cm) male-to-male plumbing nipples
      • 1 ⁄ 4 inch (0.64 cm) metal plumbing cross
      • 2 1 ⁄ 4 inch (0.64 cm) ball valves
      • 1 ⁄ 4 inch (0.64 cm) poly tubing with thick walls
      • Liquid-filled vacuum gauge, optional
      • Vacuum pump
      • Teflon tape
      • 1 ⁄ 4 inch (0.64 cm) hose barb
      • 1 ⁄ 4 inch (0.64 cm) 90-degree elbow hose barb
      • Silicone 1 caulk
      • Food coloring
      • Cornstarch


      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!

      Warnings

      • Always wear safety gear when using power tools. Don safety gloves and goggles, for instance, when using a jigsaw or a drill.
        Thanks
        Helpful 1 Not Helpful 2
      Advertisement

      You Might Also Like

      How to
      Use a Ratchet Strap
      Homemade Dawn Powerwash: Easy Recipe for Refills
      Moving a Vehicle’s Electric Power Seat Forward or Back Manually
      How to
      Make a Drone
      5 Ways to Reset Any Maytag Washing Machine
      How to
      Disassemble and Clean a Honeywell Quietset Tower Fan
      How to
      Fix a Leaky Sink Trap
      How to
      Use a Light Timer
      How to
      Paint on Plastic
      How to
      Use Instant Hem Tape
      Safe & Effective Ways to Clean & Unclog Any Sink Drain
      How to
      Make a Smokeless Fire Pit
      How to
      Get Spray Foam off Your Hands
      How to
      Make Silicone Adhesives & Caulks Dry Faster
      Advertisement

      References

      1. ↑ https://www.education.com/science-fair/article/create-a-vacuum-chamber/
      2. ↑ https://sciencing.com/make-vacuum-chamber-science-experiment-12059805.html
      3. ↑ https://www.education.com/science-fair/article/create-a-vacuum-chamber/
      4. ↑ https://www.education.com/science-fair/article/create-a-vacuum-chamber/
      5. ↑ https://sciencing.com/make-vacuum-chamber-science-experiment-12059805.html
      6. ↑ https://www.education.com/science-fair/article/create-a-vacuum-chamber/
      7. ↑ https://sciencing.com/make-vacuum-chamber-science-experiment-12059805.html
      8. ↑ https://www.youtube.com/watch?v=ERRMoHfrjAI&feature=youtu.be&t=271
      9. ↑ https://www.youtube.com/watch?v=jFUBblZgXwU&feature=youtu.be&t=10
      1. ↑ https://www.youtube.com/watch?v=ERRMoHfrjAI&feature=youtu.be&t=80
      2. ↑ https://www.youtube.com/watch?v=ERRMoHfrjAI&feature=youtu.be&t=90
      3. ↑ https://www.youtube.com/watch?v=ERRMoHfrjAI&feature=youtu.be&t=94
      4. ↑ https://www.youtube.com/watch?v=ERRMoHfrjAI&feature=youtu.be&t=153
      5. ↑ https://www.youtube.com/watch?v=ERRMoHfrjAI&feature=youtu.be&t=147
      6. ↑ https://www.youtube.com/watch?v=7fwytA5r2Mw&feature=youtu.be&t=21
      7. ↑ https://www.youtube.com/watch?v=7fwytA5r2Mw&feature=youtu.be&t=121
      8. ↑ https://www.youtube.com/watch?v=ERRMoHfrjAI&feature=youtu.be&t=290
      9. ↑ https://www.youtube.com/watch?v=ERRMoHfrjAI&feature=youtu.be&t=190
      10. ↑ https://www.youtube.com/watch?v=ERRMoHfrjAI&feature=youtu.be&t=192
      11. ↑ https://www.youtube.com/watch?v=ERRMoHfrjAI&feature=youtu.be&t=192
      12. ↑ https://www.youtube.com/watch?v=jFUBblZgXwU&feature=youtu.be&t=241
      13. ↑ https://www.youtube.com/watch?v=ERRMoHfrjAI&feature=youtu.be&t=192
      14. ↑ https://www.youtube.com/watch?v=ERRMoHfrjAI&feature=youtu.be&t=200
      15. ↑ https://www.youtube.com/watch?v=ERRMoHfrjAI&feature=youtu.be&t=114

      About This Article

      Article Summary X

      If you’d like to make your own vacuum chamber, start by finding a mason jar to use as your chamber, and a vacuum pump to help remove the air from inside it. To connect the pump to the chamber, trace a rubber stopper on top of the jar’s lid so you can cut out a hole. Once you cut out the hole, shove the stopper into it until it fits tightly, then push the nozzle of your vacuum pump through the stopper. To ensure there are no gaps between the stopper and lid, apply a stream of super glue all the way around the outside edge of the stopper. When the glue dries, test out your vacuum chamber by putting something with a bit of air, like a marshmallow, inside the jar. Make sure to screw the lid on tightly, then turn on the pump to remove the air! To learn more, like how to make a high-powered vacuum chamber using a pressure cooker, scroll down.

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 66,400 times.

      Did this article help you?

      Advertisement