How to Make a Wire Tree Sculpture

Reviewed by Kelly Medford

Last Updated: August 23, 2023 Approved

A wire tree sculpture can be a lovely homemade decoration. You can make your own wire tree sculpture to decorate your home , liven up your office, or even to give as a gift. To create this tree you must prepare the branches, twist the wire, and secure the tree in a container.

Part 1

Part 1 of 3:

Creating the Branches

Download Article

Metal wire can be found at a local craft store. You will find it in the jewelry making supply aisle. It’s usually sold in a gold or silver finish.
2
Cut the wire into 10 strips. Each strip will be cut to be 2 ½ feet (76 cm) long. Make the cut using a pair of wire cutters. Set the wires off to the side. ^{[1]
X
Research source}
- The wire cutters are sharp. Use caution.
Advertisement
String a bead onto your first wire. Bring it down to the center of the wire. Bend the wire around the bead until the ends meet. Twist the wire tightly, moving down from the bead about ¾ inch (19 mm). You will be left with two ends on either side of the twist. ^{[2]
X
Research source}
Add another bead to one of the ends of your wire. Bend and twist the wire around the bead like you did in the last step. You will have about ¾ inch (19 mm) of wire below the bead. Repeat this step on the remaining end of the wire. ^{[3]
X
Research source}
You now have three beads on the wire in a “t” shape. Secure the beads by twisting the remaining wire together below the “t”. Twist these two wires together about ¾ inch (19 mm). ^{[4]
X
Research source}
Add three beads to each of the remaining wires. You will end up with 10 “t” shaped wires with three beads on each wire. ^{[5]
X
Research source}

Part 2

Part 2 of 3:

Twisting the Wire into a Tree

Download Article

Cross two branches over each other and twist them together at the base of the beads. Do this with each of the branches so that you have five pairings.
2
Twist the grouped branches into a tree. Take one pairing of branches and cross another pairing over it. Begin twisting the pairings together. Add another pairing, and another, until you have added all of the pairings. Continue twisting the pairings together. This twisting is creating the “trunk” of the tree. ^{[6]
X
Research source}
- Create a thick, wide trunk by twisting the bases of the branches on top of each other.
- Create a thin, swirling trunk by stretching the bases of the branches out as your twist them together.
When you near the bottom of the wires, twist the wires around each other to create a ball. This ball will help to stabilize the tree within its container. ^{[7]
X
Research source}

Part 3

Part 3 of 3:

Securing the Tree in a Container

Download Article

1
Place the tree into the desired container. Add a liberal amount of glue to the bottom of the container using a hot glue gun . Push the ball of the tree into the hot glue. Hold onto the tree while the glue dries. ^{[8]
X
Research source}
- The container can be a small planter or decorative bowl.
2
Add one layer of pebbles to the container. While the glue is still hot, add a layer of pebbles to the container. All of the pebbles should fit down into the glue. They should be surrounding the tree trunk. They will offer the tree more support once all of the glue is dry. ^{[9]
X
Research source}
- Remember to continue to hold the tree while adding the pebbles. If you need to free your hands, prop the tree up with something to prevent it from falling over.
- Work quickly as your glue will dry within one to two minutes.
Add another layer of glue on top of the first layer of pebbles. Continue to add pebbles to the glue. Repeat this process several times until you have reached the top of the container. ^{[10]
X
Research source}
4
Adjust the branches. Once the glue has dried, you can adjust your tree branches. Bend the wire branches so that the tree takes your desired shape. ^{[11]
X
Research source}
- Turn the branches down to resemble a weeping willow tree.
- Fray the branches out and slightly up to resemble a maple or oak tree.

Community Q&A

Search

Add New Question

Question

What do I put on the wire?

Community Answer

Anything that will go with the decor of your home or the room where you will place the sculpture. Search "wire tree sculpture" on Google Images for some ideas.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 3 Helpful 13
Question

Before reading this, I thought it would be easier to start with the branches if using beads. How do the beads attach securely when starting at the roots?

T. Chinsen

Top Answerer

With the final bead at the open end, pass one wire through the bead hole a second time for the most secure method. It can also be secured by making a wire spiral against the bead. Make the spiral large enough to cover the bead hole and press it onto the bead.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 0 Helpful 8
Question

Is there a way to add branches to the tree once it's done?

Community Answer

Yes. You just have to twist the branch all the way up the trunk to secure it.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 2 Helpful 7

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Video

Tips

Use pliers to twist the wire if your fingers get sore or tired.

Thanks
Helpful 6 Not Helpful 2

Submit a Tip

All tip submissions are carefully reviewed before being published

Name

Please provide your name and last initial

Submit

Thanks for submitting a tip for review!

Warnings

The wires may poke your fingers while you are twisting them into place.

Thanks
Helpful 5 Not Helpful 2
Use caution with the hot glue gun. The glue can get very hot and burn your skin.

Thanks
Helpful 5 Not Helpful 2

Things You'll Need

25 feet of 22-gauge wire
Wire cutters
Ruler
Beads
Hot glue gun
Pebbles
Small container to hold the tree

You Might Also Like

[1]

[2]

[3]

[4]

[5]

[6]

[7]

[8]

[9]

[10]

[11]

Log in

How to Make a Wire Tree Sculpture

Steps

Creating the Branches

Twisting the Wire into a Tree

Securing the Tree in a Container

Community Q&A

Video

Tips

Warnings

Things You'll Need

You Might Also Like

References

About This Article

Reader Success Stories

Did this article help you?

Quizzes

You Might Also Like

Featured Articles

Trending Articles

Featured Articles

Featured Articles

Watch Articles

Trending Articles

Quizzes

Explore Categories