Download Article
Learn to create a DIY arrow with our simple steps
Download Article
Whether you're working with the same basic materials our human ancestors used upwards of 10,000 years ago, or you've just made a trip to the local hardware store to gather supplies, the construction of an arrow remains the same. This article will walk you through two very different ways to construct an arrow - one that uses the most of naturally-available supplies and one that takes advantage of modern conveniences!
Things You Should Know
- Find a long stick that’s slightly thinner than a pencil. Then, find a sharp and pointed rock slightly wider than your stick’s width.
- Use glue and string to connect the rock to 1 end of the stick. Then, create a notch at the other end of the stick and attach the feathers.
- Let the arrow dry for at least 2 hours to ensure the glue sets properly.
Steps
-
Find a stick. The shaft of your arrow should be made from a suitable stick or branch. You want a piece of wood that is light yet sturdy and as straight as possible. For a long bow, find a stick that is slightly thicker than a pencil, and about the length of the distance from your wrist to your shoulder. [1] X Research source
- It's better to stick with a longer stick rather than a shorter stick - you can always break part of a stick off if it's too long, but there's no way to make a short stick longer.
-
Find a pointed rock. Ideally, your rock should have one sharp, pointed end and one flatter end that fits flush against one end of your stick. Good stones will have a cone-shaped or blade-shaped point and be slightly wider than the stick's thickness. If needed, sharpen your rock's point against another rock or a sharpening stone. [2] X Research source
- Alternatively, you can use sharp pieces of bone if they're available. [3] X Research source If you're in an area known for volcanic activity (such as the Hawaiian islands), you may even want to look for naturally-occurring obsidian around old, cooled lava flows.
- If you're very dedicated (or lucky), you might be able to find an actual arrowhead - that is, a specially-sharpened rock used by an ancient culture to tip an arrow. Arrowheads are occasionally recovered from places where the earth has been disturbed, such as recently-plowed fields, construction sites, and riverbeds.
Advertisement -
Gather glue, string, and feathers. If you're willing to compromise in terms of your arrow's historical authenticity, you can simply use commercial glue (a hot glue gun works best) and normal string or twine. On the other hand, for a truly old-school arrow, you can make a simple glue from flower and water and make string from certain types of tree bark. If possible, get two large bird feathers that are the same size. [4] X Research source
- The feathers aren't absolutely necessary, but they will improve your arrow's accuracy by stabilizing it as it flies.
-
Glue the pointed rock to the end of the stick. This can be done by cutting a small notch into the stick deep enough to hold about a 1/4 of the length of the rock. Glue the rock in place, then coat the part of the stick near the rock with glue. Wrap a string around the notch and the base of the rock, making sure it grips the stick and the rock tightly. Tie the string securely, then coat it with glue to improve its strength. -
Allow the arrow to dry. Carefully lay your arrow down so that none of its weight is being supported by the tip and allow it to dry. Leave it in the sun to speed the drying process, carefully turning it over after an hour or so to ensure the glue dries evenly.
-
Cut a small notch at the "back" end of the stick. When you fire your arrow, the bowstring will fit into this notch, helping the keep the arrow steady. [5] X Research source This notch doesn't have to be terribly deep - 1/8 to 1/4 of an inch will usually do, based on the thickness of your bowstring.
-
Attach the feathers. Cut your feathers down the center. Place some glue on the shaft of your arrow and glue half of the feather down this in a way so it curves slightly. Arrange four feather halves so that they're evenly spaced around the circumference of the back end of the arrow and they all curve in the same direction. The spiral arrangement of the feathers will cause the arrow to turn in a spiral as it flies (like a well-thrown football or a rifle bullet), which tends to make it fly straighter and and more accurately.
- Traditionally, a thin cotton thread would be used to tie the feathers on by ruffling them the wrong way so a gap appeared to place the string while the feather was held to the shaft. You may choose to replicate this practice if you desire. If you do, wrap the thread around the feathers so that they're tightly held against the shaft of the arrow, then glue the thread in place.
-
Let the arrow dry again. Let the glue dry for about 2 hours - your exact drying time will vary depending on the type of glue you use and the construction of your arrow. Again, make sure that your arrow is arranged so that neither the feathers or the point of the arrow are bearing any weight as the glue dries - otherwise, they may dry crooked.
-
Test your arrow. When you're sure the glue is completely dry, gently flex the tip and the feathers to test their strength. If they're securely attached and don't budge at all, your arrow's ready to fire! Notch your arrow in your bow, pull the bowstring back, aim, and let your arrow fly! Never shoot your arrow at people or animals - even stone age arrows can seriously hurt someone - after all, they were originally used for hunting.
Advertisement
-
Buy or fashion your shaft(s). Today, there are a wide variety of materials that arrow shafts are constructed from. Some hunters use wooden arrows that aren't functionally very different from old-fashioned arrows, while others prefer high-tech carbon fiber constructions. Shop around for available shaft materials or consider making your own - some sporting good and hunting supply stores even sell special arrow saws that can help you professionally fashion an arrow shaft from a wide variety of materials.
- If you want to make your own shafts, be sure your shafts are the correct length for your bow setup. If you plan on making your shafts from wood, you may want to have access to a lathe to help round square shafts to a perfect roundness.
-
Square the end of your shaft. The end of your shaft should be perfectly flat to ensure a good fit when you attach the arrow's point. If you bought a prefabricated arrow shaft, you may not need to do any extra work, but if you're fashioning your arrows from wood, you'll definitely need ensure that the end of the shaft is perfectly square. Press the end of the shaft into an abrasive surface (sandpaper, etc.) and rotate the shaft to square the end.
- A arrow-squaring device can be a tremendous help - these ensure that the shaft is held perfectly straight as it is abraded. Arrow-squaring devices are fairly cheap - often retailing for less than $50.
-
Attach a point and/or insert to the end of the shaft. Ensure the end of the shaft is perfectly square and free of any wood shavings, dirt, etc. Then, affix the arrow's point. This process will vary based on the type of shaft your arrow uses.
- For metal or carbon shafts, you may need to first glue or screw in a special metal insert before affixing the point. Consult the vendor or manufacturer if instructions aren't included with the point or insert.
- For wooden shafts, you may need to taper the shaft so that the point can be mounted securely. Glue the point over the shaft with archery glue, wiping away any excess.
-
Add a nock. The "nock" is the small notch at the back of the arrow where the bowstring fits. If you're making an arrow from a wooden shaft, you can carve a shallow nock into the back end of the shaft yourself. You can also buy commercially-available nocks which are designed fit over (or in to ) the shaft of the arrow. These are usually brightly-colored plastic so that your arrows are easy to find after firing. Some high-end nocks even contain a small LED so that they glow in the dark, making hunting or target shooting at night much easier.
- Make sure your nock is sized correctly so that it fits securely to the shaft before you glue it or screw it in. You definitely don't want a poorly-fitted nock to slip or fall off when you draw your bowstring.
-
Fletch your arrow. Fletching is the process of adding small fins, or "vanes," to the back end of the arrow to ensure it flies straighter. You may fletch your arrows with feathers or another lightweight material. However, you may find it easier simply to buy modern plastic vanes, which are cheap and effective. Use thin lines of archery glue to secure these ahead of the nock.
- Fletching is much easier with an apparatus called a "fletching jig." These allow you to securely and accurately add your feathers or vanes and ensure that your spacing is perfectly even. Fletching jigs are available for less than $100.
-
Make your finishing touches. Allow any glue to dry - your arrow may need to dry for several hours, depending on whether your tip, nock, and fletching were attached with glue or not. When your arrow is finished drying, or if you constructed an arrow entirely from screw-in parts, you can consider customizing it. You may want to mark it with paint or a permanent marker to make it easier to retrieve or to give it a distinct appearance. If you used a wooden shaft, you may want to finish the wood to protect it from the elements and to give it a more pleasing appearance. When your arrow is just how you like it, you're ready to add it to your quiver!
- As always, make sure never to fire your arrow at people or animals (unless you're on a legal hunting trip). Modern commercial arrow points are deadly sharp - an accident can result in serious injury or death.
Advertisement
Expert Q&A
Search
-
QuestionWhat type of wood is best for making an arrow?Clay Hayes is an Archery Expert based in Idaho. He owns and operates the website Twisted Stave, where he sells merchandise, offers tutorials, and blogs about his life as an outdoorsman. Clay and his family have built an online community of over 440 thousand archery and hunting enthusiasts with their YouTube channel. Clay has authored three books and produced hundreds of videos on wilderness skills, traditional archery, bow building, and bow hunting. He received a Bachelor’s degree in Natural Resource Conservation from the University of Florida and a Master’s degree in Wildlife Ecology from Mississippi State University.For crafting arrows, I typically purchase shafts made from materials like Douglas fir or Cedar, commonly used for wooden shafts. Begin by selecting shafts with the appropriate stiffness, considering the spine ranges. This advice is specific to wood shafts; carbon shafts follow a different process. Choose a shaft that aligns with your bow weight, draw length, and desired arrow tip weight. Taper the tail end, attach the nock angled back, and dip the arrow in a sealing solution to maintain consistent moisture content and prevent weight changes. Affix the nock, use a fletching jig to position three fletchings at 120 degrees apart and secure them with glue. After drying, cut the arrow to length, taper the tip, and attach your chosen field tip or broadhead.
-
QuestionWhat is the best tree branch for making a arrow?Community AnswerOak and softer should work the same, more or less. But the arrow needs to be able to flex in order to get around the center of the bow.
-
QuestionHow can I make an arrow if I don't have a rock?Community AnswerYou can use other materials, like copper, hard plastic, etc. You could also make the wood into a point and fire harden it.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
- Try to cut the two feathers evenly in half as well as you can, otherwise it will not fly as straight, and there is a chance it won't go into a spiral.Thanks
- Make sure the wood and the rock aren't too small or heavy.Thanks
- Tie the rope tight.Thanks
Tips from our Readers
The advice in this section is based on the lived experiences of wikiHow readers like you. If you have a helpful tip you’d like to share on wikiHow, please submit it in the field below.
- When finding the stick, it is best to make sure that it is longer than what you need. That way, you can shave it down to the perfect size.
- It's best the rocks are ones that are thick on one side and flat on the other. It will stick to the target better if it is thick.
- Instead of using a rock for a tip, try sharpening the end of the stick. The arrow will be lighter.
- Slate and any kind of light, flat, carvable rock should be suitable to use as a tip.
- Make sure that your shaft is a hard piece of wood or light metal.
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Warnings
-
Thanks
Advertisement
Things You'll Need
- A stick (the best kind is Hazelnut).
- A rock or slate.
- Super or hot glue.
- A pocketknife.
- String.
- Feather (optional)
Expert Interview
Thanks for reading our article! If you’d like to learn more about archery, check out our in-depth interview with Clay Hayes .
References
- ↑ https://practicalselfreliance.com/make-primitive-arrows-basics/
- ↑ https://boyslife.org/hobbies-projects/projects/872/make-an-authentic-native-american-arrow/
- ↑ https://practicalselfreliance.com/make-primitive-arrows-basics/
- ↑ https://boyslife.org/hobbies-projects/projects/872/make-an-authentic-native-american-arrow/
- ↑ http://wildernessarena.com/supplies/weapons/making-arrows-in-the-wild
- ↑ https://cultureofsafety.thesilverlining.com/safety-tips/archery/
- Videos provided by Shawn Woods
About This Article
Article Summary
X
If you want to make an arrow from materials in the wild, look for a stick or branch that is a bit thicker than a pencil, and about the same length as the distance between your elbow and shoulder. To make the head, cut a small notch in the end of your stick, glue a pointed rock to the end, and secure it by tying a piece of string around the rock and the stick. Leave your arrow to dry in the sun for an hour, then turn it over to dry the other side. To finish, cut a notch in the back end of the stick and glue 4 feathers around the shaft's circumference. If you want to learn how to make an arrow using materials you can buy at the store, keep reading the article!
Did this summary help you?
Thanks to all authors for creating a page that has been read 316,672 times.
Reader Success Stories
- "Try and use fresh feathers, they are lighter and in my personal view, they help the arrows fly better."
Advertisement
"Try and use fresh feathers, they are lighter and in my personal view, they help the arrows fly better."
"Thank you for showing me how to make an arrow."
"How deep to make the notch helped."
