How to Measure Wounds

PDF download Download Article
PDF download Download Article

You probably learned about wound assessment and care in nursing school. But maybe so far you haven’t found much cause to use these skills at your job. If that’s about to change, it’s a good idea to review the most common methods for clinical wound assessment. To assess a wound, you need to inspect its appearance and odor, feel it, check for drainage, measure the wound, note the appearance of the wound’s edges, check for signs of infection, and ask the patient about the level of pain they are experiencing from the wound. Completing an accurate assessment will improve the effectiveness of the treatment and help you to identify the progression of the wound’s healing.

Method 1
Method 1 of 2:

Measuring the Wound’s Length, Width, Diameter, and Depth

PDF download Download Article
  1. Look closely at the wound and its edges, and then draw the wound’s shape. Write a brief description of the wound’s appearance to go along with the drawing.
    • For example, you might use words like jagged, red, puffy, or oozing to describe the wound.
  2. Use a ruler to measure the wound from top to bottom to get the length. Make sure to measure the longest part of the wound to find the full length.
    Advertisement
  3. Place the ruler over the widest part of the wound. [1]
    • You might measure this distance as 8 centimeters, for example.
  4. If the wound is circular, then use a ruler to measure across the widest part of the circle. This measurement is the diameter of the wound.
  5. Gently insert the applicator into the deepest part of the wound. This is the part of the wound where the applicator goes in the farthest. You might have to try a couple of different spots if it is not immediately evident which point is the deepest. Gently remove the applicator, using your fingers to hold it just above the point of wound entry. Use the ruler to measure from the bottom of the applicator to where your fingers are. [2]
    • For example, the depth of the wound might be 2 centimeters.
  6. When erosion occurs around the edges of wounds, that is known as undermining. This can result in a small opening in an otherwise large wound. [3] As you check the wound, stop to measure any undermining. Insert a cotton-tipped applicator into each area undermining and measure the same way you measured the depth. [4]
    • You might measure the undermining as 3 centimeters, for example.
  7. “Tunneling” refers to secondary wounds that form when there is an infection or other issue in the primary wound. [5] To measure tunneling, insert a cotton-tipped applicator into the tunnel. As in previous steps, grasp the applicator at the wound’s edge and use your ruler to measure in centimeters. [6]
    • For example, you might measure the undermining as 2 centimeters.
  8. Use the same system to record all of your measurements. That will prevent any inconsistencies in documenting. Always record by writing down the Length (L) x Width (W) x Depth (D). [7]
    • You will also need to note the measurements of undermining and tunneling, if any, after you record L x W x D.
    • Wounds grow and heal at different speeds. You may only see changes every 2-4 weeks. If you notice movement before that, go ahead and perform your measurements and recordings.
  9. Along with the wound’s measurement, it is also important to note any unusual findings. These may include:
    • Odor
    • Color
    • Drainage
    • Appearance of the skin around the wound
    • Signs of infection, such as redness, warmth, or swelling
    • Pain level (as reported by the patient)
    10. Advertisement
Method 2
Method 2 of 2:

Measuring with Tracing

PDF download Download Article
  1. You’ll need 2 different types of sheets. 1 is a transparent contact layer that you will place over the wound. Make sure to wipe it down with antibacterial wipes before letting it touch the wound. You’ll have a second sheet that has adhesive on one side. Your tracing will appear on both sheets. That sheet will later be attached to the patient’s chart or medical records. [8]
  2. Make sure that the transparency covers the entire wound. Using a pencil or marker, trace the entire wound. Don’t press too hard--you don’t want to harm the patient. [9]
  3. You want to make sure that the patient’s file includes all of the necessary information. On the transparency, write down the patient’s name, date of birth, date of measurement, and wound size. You will simply use a ruler to measure the L x W x D on your tracing. [10]
    • You will still need to measure depth directly. Insert a cotton-tipped applicator into the wound. With a ruler, measure from point of entry to the bottom of the applicator.
    • Attach the adhesive sheet to the patient's chart of medical records.
  4. Each wound grows or heals differently. For most wounds, measuring once a week is adequate. If you notice rapid changes between measurements, measure more frequently. Some wounds will only show changes every 2-4 weeks. [11]
  5. Use the same system to record all of your measurements. That will prevent any inconsistencies in documenting. Always record by writing down the Length (L) x Width (W) x Depth (D). [12]
    6. Advertisement

Expert Q&A

Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      • Make sure to always measure in centimeters.
        Thanks
        Helpful 2 Not Helpful 1
      • Always use standard precautions and transmission-based precautions when needed. Make sure to put on gloves before you begin measuring the wound as well.
        Thanks
        Helpful 1 Not Helpful 0
      • There are other types of measurement, such as digital planimetry and photo documentations, but these are not commonly used in clinical practice.
        Thanks
        Helpful 1 Not Helpful 1
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Things You'll Need

      • Ruler
      • Tracing Sheets
      • Pencil or marker
      • Cotton-tipped applicator

      You Might Also Like

      How to
      Remove a Splinter Under Your Fingernail
      How to
      Tape a Broken Pinky Toe
      How to
      Remove Stitches
      How to
      Remove Surgical Staples
      How to
      Painlessly Remove a Splinter
      How to
      Remove a Deep Splinter
      How to
      Determine if a Cut Needs Stitches
      How to
      Splint a Finger
      How to
      Remove Pus from a Wound
      How to
      Attend to a Stab Wound
      How to
      Treat a Bullet Wound
      How to
      Treat a Skin Flap or Abrasion During First Aid
      How to
      Remove Splinters from Feet
      How to
      Suture Wounds
      Advertisement

      References

      1. ↑ https://www.aranzmedical.com/uncategorized/can-improve-accuracy-wound-measurements/
      2. ↑ https://www.ihca.com/rc_files/81/Clinical%20Solutions%20-%20May%202014.pdf
      3. ↑ http://www.woundsource.com/blog/how-assess-wounds-tunneling-and-undermining
      4. ↑ https://www.ihca.com/rc_files/81/Clinical%20Solutions%20-%20May%202014.pdf
      5. ↑ http://www.woundsource.com/blog/how-assess-wounds-tunneling-and-undermining
      6. ↑ https://www.ihca.com/rc_files/81/Clinical%20Solutions%20-%20May%202014.pdf
      7. ↑ https://www.skilledwoundcare.com/post/how-to-measure-wounds-the-right-way
      8. ↑ https://woundeducators.com/wound-size/
      9. ↑ https://woundeducators.com/wound-size/
      1. ↑ https://woundeducators.com/wound-size/
      2. ↑ https://www.woundsource.com/blog/5-techniques-accurate-wound-measurements
      3. ↑ https://www.skilledwoundcare.com/post/how-to-measure-wounds-the-right-way

      About This Article

      In other languages
      Thanks to all authors for creating a page that has been read 73,733 times.

      Did this article help you?

      Advertisement