PDF download Download Article PDF download Download Article

A screen spline is a rubber cord that keeps the window screen secure in its frame. If you've purchased a new window or your old spline is damaged, you'll need to purchase a new screen spline. Take measurements of the old spline or the window frame groove to make sure you purchase the right spline size. All you need to know is the spline diameter and width!

Part 1
Part 1 of 3:

Removing the Spline from the Screen

PDF download Download Article
  1. Check for clips holding your window screen in and, if you spot any, lift the clips up to unfasten the screen from the window. In most cases, your window screen frame should pop out easily. [1]
    • If your screen frame is secured by clips, they should be located along the left and right sides.
    • After removing the frame, lay it down on a flat surface like a table.
  2. Take the screwdriver and pry up 1 end of the screen spline. Lift it until you can grab the end of the screen spline with your hands. [2]
    • You can pry the screen spline up from either end.
    • If you don't have a flat-head screwdriver, you can use a butter knife as an alternative.
    • The screen spline looks like a long cord made of rubber or foam. [3]
    Advertisement
  3. Once you have a strong grip, pull upward on the screen spline with light pressure. Continue lifting the spline until you remove it from the window frame completely. [4]
  4. You will get the best and most precise readings if you keep the screen spline as intact as possible. If the spline is already broken, remove it gently to keep it as intact as you can. [5]
  5. Advertisement
Part 2
Part 2 of 3:

Finding the Diameter of the Spline

PDF download Download Article
  1. Do not throw away your screen spline if it was recently damaged. You can still use it to determine the size your new screen spline should be. [6]
  2. Lay the screen spline on a flat surface and position the tape measure across 1 end of the spline to find the diameter, or width, of the spline. [7] Measure from 1 side of the spline to the other, and write down the number. [8]
    • The spline's measurements tend to be in inches or centimeters, depending on whether your country uses the imperial or metric measurement system.
  3. If your screen spline is badly damaged or you no longer have it, you can use the screen frame to take the spline diameter. Place the tape measure inside the spline groove opening and take measurements from the bottom of the opening to the top to find the diameter. [9]
    • The spline groove opening is the place in the screen frame where you insert the spline.
  4. Try to find as precise a match as possible. [10] If your spline measurements are between 2 sizes, determine whether the width is nearer to the larger or smaller size and choose the closest match.
    • If you old spline has a .125 in (0.32 cm) diameter, for example, you would look for a new spline with the same measurements on the package.
  5. Advertisement
Part 3
Part 3 of 3:

Installing a New Screen Spline

PDF download Download Article
  1. Measure all 4 interior sides of the screen with a tape measure and record the length. Use scissors or a sharp knife to cut your spline to the same length. [11]
    • If your previous spline's length is still intact, use it as an additional guideline while cutting the spline to size.
  2. Starting in 1 corner of the screen, use your hands to insert the spline into the frame groove. Use a spline roller to smooth over any raised areas to make sure it stays secure. [12]
  3. If the spline does not easily lay flat in the frame groove, try spraying it with a silicone lubricant, available at hardware stores. [13]
    • If the spline is too large to insert into the screen, pull on 1 end to stretch it thinner as you insert it. The spline should return to its original shape and keep a firm hold in the frame.
  4. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    How do I know what size replacement screen spline to buy?
    Michael Fox
    Window Repair Specialist
    Michael Fox is a Window Repair Specialist and the President at Window Repair Systems and WindowHardwareDirect.com, based in Westminster, South Carolina. With over 25 years of experience, Michael specializes in commercial window repair and service. He holds a business degree from Monroe Community College and SUNY Brockport. Michael has helped Window Repair Systems and WindowHardwareDirect.com become an industry leader in commercial window repair and hardware distribution, servicing schools and businesses and training large public school systems.
    Window Repair Specialist
    Expert Answer
    Measure the diameter of your old screen spline, then use that when you're purchasing a new screen spline.
Ask a Question
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!
      Advertisement

      Things You'll Need

      • Tape measure
      • Screen spline
      • Flat-head screwdriver
      • Scissors
      • Spline roller (optional)
      • Silicone lubricant (optional)

      About This Article

      Article Summary X

      If the cord that keeps your window screen in its frame is broken, you’ll need to get a new screen spline. To measure your screen spline, start by removing the screen frame from the window. Use a flat-head screwdriver to pry the screen spline up and out of the frame. Lay the screen spline on a flat surface and position your tape measure across 1 end to find the diameter, or width. Buy a new spline with the same measurement. If your new spline is longer than what you need, simply cut it down to the proper size with scissors or a sharp knife. You can then press the spline into the frame groove and use a spline roller to smooth over any raised areas. To learn how to adjust your spline to make sure it fits your screen properly, keep reading!

      Did this summary help you?
      Thanks to all authors for creating a page that has been read 86,192 times.

      Reader Success Stories

      • Robert Wray

        Apr 6, 2020

        "Thanks for the excellent explanation of spline sizing!"
      Share your story

      Did this article help you?

      Advertisement