Download Article
Download Article
Whether you’re experiencing a cold, snowy winter or simply defrosting your freezer, there are lots of reasons to want to melt ice relatively quickly. Normally, rock salt or a salt-based ice melt is the first choice for melting ice, especially in the winter. Luckily, if you’re looking for an alternative for melting winter ice or you’re trying to get rid of ice in your home, there are a number of other ways you can go about melting ice quickly.
Steps
-
Buy and apply your ice melt ahead of time, if possible. Ice melt, or rock salt, is most effective when it’s applied to a surface before ice actually begins to form on it. If you know a winter storm is about to hit or you’re expecting a lot of snow, put down a thin layer of ice melt first to melt the ice more quickly later. [1] X Trustworthy Source Consumer Reports Nonprofit organization dedicated to consumer advocacy and product testing Go to source- Furthermore, if you buy your ice melt ahead of time, you won’t have to travel to the store in icy conditions in order to buy it!
- You can buy ice melt at most hardware stores and home improvement stores.
-
Opt for an exothermic ice melt for the fastest results. Exothermic deicers release heat in order to melt ice, while endothermic deicers absorb heat from the sun in order to work. As a result, exothermic ice melts are able to melt ice much more quickly than endothermic ones and are also effective in any weather conditions. [2] X Research source- Examples of exothermic deicers include calcium chloride and magnesium chloride. Most ice melts are mixes of multiple substances, so choose one that has a large proportion of one of these chlorides for best results.
- Oftentimes, the packaging for commercial ice melt will state whether its exothermic or endothermic.
Advertisement -
Apply the ice melt in thin layers before, during, and after snowfalls. Don’t put too much ice melt down in a single layer, as this will actually make it less effective. Instead, spread out just enough ice melt onto your surface to have an even but thin distribution. Then, put a second layer down once the snow has begun to accumulate, then a third and final layer once the snow has stopped. [3] X Trustworthy Source Penn State Extension Educational organization dedicated to delivering science-based information to people, businesses, and communities Go to source- If you’re working with an exothermic deicer, be sure to cover your hands with safety gloves while handling the ice melt.
- Avoid creating piles of ice melt in any single location.
-
Avoid applying the ice melt to roofs, brick, or other porous surfaces. Ice melt can generally be used on wooden and concrete surfaces, such as porches and driveways, without causing any damage. However, if ice melt is applied to a porous surface, such as brick, it will eventually lead to salt build-up in that material and structural damage down the line. [4] X Trustworthy Source Consumer Reports Nonprofit organization dedicated to consumer advocacy and product testing Go to source- The best way to avoid long-term damage to porous surfaces from the use of ice melt is to quickly remove the salt once the ice has melted.
- If possible, apply a sealant to any concrete surface you intend to put ice melt on. Concrete is technically porous, so the ice melt could theoretically damage it (though this usually doesn’t happen).
Warning : Although some commercially available ice melts will be marketed as “Environmentally Safe,” this is a tad misleading, since they still contain salt that can seep into a porous surface.
-
Be sure to remove the salt after the ice has melted. Once the weather is warm enough that water won’t freeze on concrete, use a hose to spray down the area where you applied the ice melt. Use warm water, if possible. After you’ve sprayed the area, scrub it with a hard-bristled scrub to loosen up any clinging salt crystals and spray it again to remove them. [5] X Trustworthy Source Consumer Reports Nonprofit organization dedicated to consumer advocacy and product testing Go to source- Salt can damage grass and other flora, so avoid spraying the salt into any plants or soil, if possible.
- If the melted ice is relatively slushy, simply use a snow shovel to scoop it up and remove it to avoid making a mess.
Advertisement
-
Opt for water softener salt pellets if you have access to them. These are often sold at the same stores that carry rock salt, but at a lower price. Spread the pellets in thin layers onto a surface the same way you’d apply ice melt, applying a layer before, during, and after a snowfall. [6] X Research source- For best results, go with small pellets rather than coarse ones. The coarse pellets will not be as efficient at melting ice.
-
Make a deicer out of dish soap, rubbing alcohol, and warm water. In a large bucket, mix 1 ⁄ 2 gallon (1,900 mL) of warm water, 2 teaspoons (9.9 mL) of dish soap, and 1 tablespoon (15 mL) of rubbing alcohol together. Then, fill a spray bottle with the mixture and spray it directly onto the ice in order to melt it. [7] X Research source- Note that this mix can be harmful to grass and other plants, so avoid spraying it too close to your yard or other planted areas.
Warning : Exposure to large quantities of rubbing alcohol may cause eye or skin irritation, so avoid using this mixture to treat very large areas of ice.
-
Use ashes to melt ice if you have an active fireplace in your home. Ashes will absorb the heat of the sun and thereby melt any ice around them. After burning a wood fire, use a trowel to scoop the ashes out of the fireplace and place them in a bucket. Then, use the trowel or your hands to evenly spread the ashes over the surface of the ice to melt it. [8] X Research source- Note that because they rely on absorbing heat from the sun in order to be effective, ashes should only be used to melt ice outdoors.
-
Go with sugar or table salt to melt ice in a small area. The chemicals in sugar and table salt react with water to lower its freezing point, thereby causing ice to melt. However, these are relatively expensive to use in bulk, so you should only apply a thin layer of either of these household products to a small area of ice. [9] X Research source- For example, if you have ice on your car windshield or a small wooden porch swing, this would be a small enough area to warrant using sugar or table salt instead of ice melt.
-
Mix water and vinegar for an inexpensive homemade ice melt. Pour 1 part water and 2 parts vinegar into a small spray bottle and mix them together. Spray this mixture directly onto the ice and continue spraying until you see the ice begin to melt. [10] X Research source- This method isn’t always successful, so you should only use it as a last resort if no other option is viable.
- Because this method doesn’t melt ice as quickly as salt, you should only use it on small areas (e.g., a car window) where ice has accumulated.
Tip : If you happen to have leftover pickle juice in your house, you can also use that to melt ice. Since it contains salt and vinegar, it’s actually a bit more effective than a simple water and vinegar mixture!
Advertisement
-
Run the ice under hot water if it’s easy to move to the sink. If you’re trying to melt ice off of a lightweight object, running it under hot tap water is the easiest and least messy way to melt the ice quickly. The heat from the water will combine with the force of gravity to loosen and remove the ice as quickly as possible. [11] X Research source- If possible, wear heat-resistant rubber gloves as you do this, in order to avoid burning your hands on the hot water.
- If you have a deep enough sink, you can also place the item in the sink under the faucet and simply allow the water to run.
-
Use a hair dryer to melt ice in the refrigerator or freezer. Unplug the refrigerator or freezer and remove all the items from inside. Then, plug in your hair dryer, turn it on, and point it directly at the ice. [12] X Research source- For best results, place a towel underneath the ice as you melt it in order to catch the water as it rolls down from the ice block.
Warning : Use extreme caution operating the hair dryer near the water that will be produced by the ice melting. Avoid touching the ice or the water with the hair dryer.
-
Pour ordinary table salt on the ice if you’re melting ice cubes. This is a good science experiment you can conduct at home to teach children about chemistry, since the ice melts as a result of a chemical reaction between the salt and the ice. Be sure to place the ice cubes on a plate or in a bowl before you pour the salt on them. [13] X Research source
Advertisement
Expert Q&A
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Things You'll Need
- Rock salt or ice melt
- Water softener pellets
- Ashes
- Vinegar
- Sugar
- Table salt
- Hair dryer
References
- ↑ https://www.consumerreports.org/exterior-maintenance-repairs/best-ice-melt-how-to-use-ice-melt/
- ↑ https://chem.libretexts.org/Bookshelves/Physical_and_Theoretical_Chemistry_Textbook_Maps/Supplemental_Modules_(Physical_and_Theoretical_Chemistry)/Equilibria/Le_Chateliers_Principle/Effect_Of_Temperature_On_Equilibrium_Composition/Exothermic_Versus_Endothermic_And_K
- ↑ https://extension.psu.edu/watershed-friendly-deicing
- ↑ https://www.consumerreports.org/exterior-maintenance-repairs/best-ice-melt-how-to-use-ice-melt/
- ↑ https://www.consumerreports.org/exterior-maintenance-repairs/best-ice-melt-how-to-use-ice-melt/
- ↑ http://www.compoundingpennies.com/alternatives-to-rock-salt-melting-ice/
- ↑ http://www.compoundingpennies.com/alternatives-to-rock-salt-melting-ice/
- ↑ http://www.compoundingpennies.com/alternatives-to-rock-salt-melting-ice/
- ↑ https://csef.usc.edu/History/2016/Projects/J0613.pdf
About This Article
Thanks to all authors for creating a page that has been read 74,953 times.
Advertisement
