How to Open a 3 Digit Combination Lock: An Easy Guide

PDF download Download Article
PDF download Download Article

At some point or another, you'll probably need to use a combination lock. These can seem a little tricky if you've never opened one before, but don't worry! We'll walk you through the process of opening a 3-digit lock that has 3 dials as well as a circular spinning lock. We'll also show you what to do if you've lost the combination or need to reset the code.

Method 1
Method 1 of 4:

Opening a 3-Digit Lock

PDF download Download Article
  1. Depending on your lock, this might mean that you line up the combination with a marker line on the wide-flat side, or you spin each of the 3 dials so the combination is visible on the narrow side of the lock. Then, pull up on the shackle to open the lock . [1]
    • Some locks have a red or green stripe running down 1 side. When you enter the combination, line up the digits, so the line passes through them.
    • If your lock doesn't immediately spring up, push down on the metal shackle before you pull it up.
    • If you're opening a 3-digit combination lock on a suitcase or briefcase, you might also have to push down on a button or latch after you enter the combination. [2]
  2. Spin your circular lock dial 2 or 3 times to the right to clear it. Stop at the first number of the combination. Turn the dial left for 1 full turn, so you pass the first number and stop at the second number. Then, turn the dial right and stop at the third number of the combination. Pull up on the shackle to open the lock.
    Advertisement
  3. Sometimes, you might enter the correct combination, but if each digit doesn't line up with the stripe or marker, the lock won't recognize the combination. Line up the numbers perfectly and try again.
    • If you don't get a spinning lock open on the first try, slow down and try it again. Don't forget to spin the dial to the right to clear the numbers.
    4. Advertisement
Method 2
Method 2 of 4:

Opening a 3-Digit Lock without a Code

PDF download Download Article
  1. Pull down on the lock if you don't know the combination . Put the shackle on a hook, so you can pull on the body of the lock. This applies pressure, so you'll be able to tell when you're finding the correct numbers of the code.
    • If you don't have a hook, put your index finger through the shackle and pull up to apply pressure on the body.
  2. Keep putting pressure on the body of the lock and spin the top dial until you feel some tension—like the number is sticky. You might hear a faint click, which means you've found the right number.
    • It's a good idea to write down the numbers of the combination as you work. This way, you won't forget them again!
  3. Take your time and maintain the pressure on the body of the lock. Once you have the correct combination, the shackle will release.
    • This does take a little time, but if you listen and feel for the clicks, you'll find the correct combination.
    4. Advertisement
Method 3
Method 3 of 4:

Opening a Spinning Lock without a Code

PDF download Download Article
  1. Put your index finger through the curved metal shackle and push up. This takes a little skill—you want just the right amount of pressure, so you can sense when you've caught one of the combination numbers. If you find that the dial doesn't spin easily at all, release some pressure. If it spins too freely, put a bit more pressure on the shackle. [3]
  2. Keep applying pressure on the shackle while you do this. Stop spinning the dial to the right when it feels like it gets caught on a sticky number. Take note of the number and add 5 to it. This is the first number in your combination. [4]
    • For example, if the dial sticks on 7, add 5 to that to get 12 as your first number. Write this down.
  3. Keep spinning the dial counterclockwise until you can't move it anymore and make note of the number. Then, release a little pressure and spin the dial back and forth between that number and 0. Stop when the dial catches on a number. This is the second number in your combination. [5]
    • If it seems like the dial stops between 2 numbers, round up and use the larger one. For instance, if the dial catches between 21 and 22, go with 22.
  4. To find the last digit in the combination, spin the dial at least 2 or 3 times to the right to clear out the numbers. Stop at the first number of your code. Then, spin the dial left for 1 full turn and stop at your second number. [6]
    • You don't have to apply pressure on the shackle when you're entering the first 2 numbers.
  5. From your second number in the code, move the dial counterclockwise by 2 and try to pull up on the shackle. If it doesn't open, move the dial back by 2 and try the shackle again. Repeat this until the shackle opens—when it does, it means the dial is now on the third number of your combination. [7]
    • Write down the entire combination and put the code in a safe place.
    • Note that standard spinning combination locks come preset with a code and you can't reset them.
    6. Advertisement
Method 4
Method 4 of 4:

Resetting a 3-Dial Lock

PDF download Download Article
  1. Turn the 3 dials, so the correct combination is visible on the side of your lock. Then, pull up on the curved metal shackle at the top of the lock to open it. [8]
    • If you've never set the combination, use the factory combination 0-0-0. This allows you to set the combination.
  2. Hold the lock so the 3 digits on the side are facing you. Then, turn the metal shackle to the left by 1/4 turn—this is 90°. Push the shackle down. [9]
    • Since you'll need to keep the shackle depressed, it helps to hold the lock between your thumb and forefinger.
  3. Turn it clockwise by another 1/4 turn. This will allow you to reset the combination to a passcode of your choice. [10]
  4. Set the top number first, followed by the middle digit, and the last digit. Remember to keep the shackle pushed down while you're setting the code. [11]
  5. Let go of the shackle and pull it up, so you can move it. Turn the shackle back to the original position and push it down to lock it. [12]
    • If you wrote down the new combination, store it in a safe location or memorize it instead.
    6. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    How would a locksmith open a combination lock if I forgot the code?
    Ray Lawrence
    Locksmith
    Ray Lawrence is a Locksmith and the Owner of NorCal Locksmith in the Placer County, California area. With over 20 years of experience, he specializes in residential, commercial, and safe locksmithing services. He holds a bachelor’s degree in International Economics from the University of California-Chico.
    Ray Lawrence
    Locksmith
    Expert Answer
    Combination locks often have a series of numbers stamped on the back and as locksmiths, we have access to programs where we can input that code and it'll provide the original combo for that lock. If the code is not available, then most locksmiths would cut it off and replace it because of the cost of the lock versus the labor to open it.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 12 Helpful 22
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!

      You Might Also Like

      How to
      Pick a Lock
      An Intro to Lock Picking Using Everyday Objects
      How to
      Pick a Lock with a Bobby Pin
      How to
      Pick a Lock Using a Paperclip
      How to
      Open a Master Lock Combination Lock without the Code
      How to
      Pick a Filing Cabinet Lock
      How to
      Open a Locked Door with a Bobby Pin
      How to
      Pick a Tubular Lock
      How to
      Pick a Mailbox Lock
      How to
      Pick an Old Skeleton Key Lock
      How to
      Pick a Sentry Safe Lock
      How to
      Pick a Master Padlock
      How to
      Make a Lockpick
      How to
      Make a Bump Key to Bump a Lock
      Advertisement

      References

      1. ↑ https://logds.com/how-to-unlock-a-3-digit-combination-lock/
      2. ↑ https://www.lojel.com/wp-content/uploads/2018/05/LOJEL-Lock-instructions-v.2018.B.pdf
      3. ↑ https://youtu.be/-bK7EC4fk2g?t=42
      4. ↑ https://youtu.be/-bK7EC4fk2g?t=71
      5. ↑ https://youtu.be/-bK7EC4fk2g?t=126
      6. ↑ https://youtu.be/-bK7EC4fk2g?t=163
      7. ↑ https://youtu.be/-bK7EC4fk2g?t=183
      8. ↑ https://youtu.be/k9jMjzYZXuo?t=39
      9. ↑ http://content.masterlock.com/masterlock/resources/documents/pdf/646_647_instructions.pdf
      1. ↑ http://content.masterlock.com/masterlock/resources/documents/pdf/646_647_instructions.pdf
      2. ↑ http://content.masterlock.com/masterlock/resources/documents/pdf/646_647_instructions.pdf
      3. ↑ https://youtu.be/k9jMjzYZXuo?t=72

      About This Article

      In other languages
      Thanks to all authors for creating a page that has been read 410,529 times.

      Reader Success Stories

      • Craig Tippins

        Jul 2, 2022

        "A simple three digit master lock I used for gym. It wouldn't open even with my written down code. I opened ..." more
      Share your story
      If you buy through links on our site, we may earn a commission .

      Did this article help you?

      Advertisement