How to Open a Stuck Window

PDF download Download Article
PDF download Download Article

It can be quite frustrating when you want to open a window and find that the window won’t budge. Windows can get stuck for a number of reasons: wood frames may have warped in wet weather, the house may have settled or someone may have painted the frames shut. With patience and a few handy techniques, most stuck windows can be opened.

Method 1
Method 1 of 3:

Prying a Window Open

PDF download Download Article
  1. Look at both sides of the window, interior and exterior.
    • Make sure it is a window that is meant to be opened. Some new office and home windows are not meant to be opened. If there are no hinges or the window is a single pane with nowhere to slide, it likely does not open.
    • Make sure that the window is not nailed or screwed shut for security or energy conservation reasons.
    • Check for any staples around the interior of the window where plastic sheeting may have been fastened. Carefully remove them with needle-nose pliers.
    • Make sure any locks are disengaged.
    • Look to see if the window frame has been recently painted.
    • Decide which direction the window is supposed to open: up, outward or sideways.
  2. Removing dried paint that collected between the window and frame will free the window and allow it to be opened. [1]
    • Use a razor knife to cut along the edge of the window and the frame. Cut across all four sides of the window. You may need to check the exterior of the window in addition to the inside to make sure that it isn’t painted shut on both sides.
    Advertisement
  3. Wriggle the knife back and forth to loosen any dried paint between the window and the frame. Go around the entire edge of the window to loosen all sides.
  4. Use a wood block to cushion the blows from the hammer and prevent making dents in the wood of the window. Be careful to hit gently so as not to break the window. Hammer the wood portion of the window and not the glass.
  5. Try to loosen the window one side at a time. Then try to push the window down as if you were closing it. If it moves, make sure the window is straight in its frame and slowly attempt to open it.
    • Push each corner to see if there is any movement.
    • Press on the window gently to open it a little at a time.
  6. Place a small block of wood on the window frame to give your pry bar more leverage. Gently force the window up with the pry bar.
    • Reposition the pry bar along the bottom edge of the window to lift both sides of the window.
    • Using a pry bar may damage the wood of the window or window frame, use this method very carefully as a last resort.
    7. Advertisement
Method 2
Method 2 of 3:

Lubricating a Stuck Window

PDF download Download Article
  1. Spread wax from the bottom of a candle into the window channel. The wax will help allow the window to slide up and down and prevent future sticking. [2]
  2. Wood may swell due to humidity causing windows to become stuck. Drying out the wood may help the window open more easily. [3]
    • Run a hair dryer along the edges of the window frame for several minutes. After drying the wood, try opening the window.
    • Place a dehumidifier in a room with stuck windows. Lowering the humidity in the room should help reduce the swelling of the window frames.
  3. If the window is in a wooden frame, place a wood block along the channel where the window opens and hammer it gently to depress the wood. Make the channel wider to allow the window to move more freely.
  4. Be careful when using spray lubricants as they may discolor some surfaces or damage some types of paint.
    • If the window opens outward on hinges, spray the hinges with the lubricant for smoother operation.
  5. After you get the window to open one time, open and close it several times to loosen the action of the window. If it still sticks, check the frame to ensure that it isn’t warped or damaged from water. Feel for areas where the window meets some resistance and use a utility knife or sandpaper smooth it out.
    • Window frames with severe water damage may need to be replaced entirely.
    6. Advertisement
Method 3
Method 3 of 3:

Removing a Window Sash

PDF download Download Article
  1. The stop is a small piece of trim in the window frame that holds the movable sash in place. Examine the stop to determine how it is attached to the window frame. [4]
    • Use a utility knife to remove any paint that is sealing the stop to the window frame.
    • Remove any screws that are holding the sash in place.
    • Gently pry the stop out using a flathead screwdriver or paint scraper.
    • Be careful when removing the stops as they can snap easily. You may need to purchase a replacement stop to reinstall the window.
  2. Remove the locks or latches used to close the window. Check for any additional hardware from curtains or other additions that may be attached to the window sash or frame.
  3. Remove the bottom sash first by leaning it in towards the inside of the house. As you lean it inward, pay attention to the ropes connecting the window to the pulley inside the frame.
    • Remove the rope from one side of the window by pulling the knot down and out from the side of the window sash.
    • Remove the other rope from the other side in the same manner.
  4. Once the sash is removed, sand the edges to remove any paint or swollen wood causing the window to stick. Make sure to sand evenly to avoid creating additional bumps or uneven surfaces which may cause additional sticking issues.
    • Use a hand planer on the sides of the window if your sash has swelled.
  5. In double hung windows the upper sash can be removed as well. Remove any paint that is sealing the window shut to be able to move the sash.
    • Use a razor knife to cut around the edges of the window inside and outside.
    • Slide the upper sash down to reveal the pulleys in the side of the window jamb.
    • Pull the right side of the window in to free it from the jamb.
    • Remove the rope connecting the sash to the pulley inside the window frame and jamb.
    • Pull the left side of the window out and remove the rope.
  6. Check the edges of the sash for any paint or warped wood. Sand the sash smooth to allow for better operation.
  7. Remove any dried paint that has built up along the window sash with a scraper and sand the track smooth.
  8. Reverse the steps used to remove the window sashes to put them back in place.
    • Attach the ropes to the upper sash and slip it in place one side at a time.
    • Attach the ropes to the lower sash and place the bottom half in first. Push the upper half in place.
    • Slide the window stop back in place and attach it with screws or finish nails.
    9. Advertisement

Community Q&A

Search
Add New Question
  • Question
    What should I do if my window lock will not open?
    Community Answer
    Spray the lock with WD-40 or similar product and let it sit for 24 hours. You could also see if the lock is attached to the window or frame and unscrew or otherwise remove the entire lock.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 3 Helpful 7
  • Question
    Can I just break my window?
    Community Answer
    You could, of course, but you would have to replace the entire window, and you're risking an injury and/or property damage.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 4 Helpful 13
  • Question
    What should I do if my aluminum window will not open?
    Community Answer
    Follow the steps in the article. If nothing works, call a professional to fix it.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 6 Helpful 17
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      • A cooking spatula or butter knife with a stiff metal blade can be used in place of a putty knife.
        Thanks
        Helpful 6 Not Helpful 2
      • Work slowly and carefully rather than applying a lot of force quickly.
        Thanks
        Helpful 17 Not Helpful 16
      • If you can’t get a pry bar between the window bottom and the frame put two small screws in the frame near the bottom of each corner, leaving the head of the screw sticking out a bit. Use these to put the pry bar under and pry up on. This can damage the frame a bit.
        Thanks
        Helpful 10 Not Helpful 15
      Show More Tips
        • If your window operates with a crank, spray WD-40 or another lubricant on the frame and let it sit for 5 minutes. Have a helper carefully open the window while you crank it. Lubricate any of the other hinges while the window is open.
        Show More Tips
        Submit a Tip
        All tip submissions are carefully reviewed before being published
        Name
        Please provide your name and last initial
        Submit
        Thanks for submitting a tip for review!
        Advertisement

        Warnings

        • Wear work gloves and safety goggles when trying to force open windows as the glass may break.
          Thanks
          Helpful 10 Not Helpful 5
        • Getting one corner of a window too much higher than the other when forcing open a window will probably result in cracking the window glass.
          Thanks
          Helpful 7 Not Helpful 3
        • If a house has settled a lot, or there has been damage from a storm or other disaster the window frame may be too warped to be able to open the window safely. The whole window may need to be removed and the frame repaired or replaced.
          Thanks
          Helpful 9 Not Helpful 5
        Advertisement

        Things You’ll Need

        • Thin blade putty knife
        • Thin pry bar
        • Hammer
        • Wood scraps
        • Work gloves
        • Safety goggles

        You Might Also Like

        5 Ways to Fix a Jammed Door & Stop It From Sticking
        How to
        Pick Locks On Doorknobs: Knob Types & Lockpicking Tutorials
        How to
        Adjust a uPVC Window
        How to
        Install a Door Knob
        How to
        Remove a Door Handle
        5 Ways to Fix a Broken Door Frame
        How to
        Adjust a Standard Door Closer
        How to
        Frame a Door Opening
        How to
        Rethread a Roller Blind Cord
        How to
        Replace a Door Handle
        Easy Fixes for Ring Doorbell Flashing Blue
        How to
        Reset a Ring Doorbell
        How to
        Seal a Door
        How to
        Remove a Ring Doorbell Cover
        Advertisement

        Expert Interview

        Thanks for reading our article! If you'd like to learn more about opening stuck windows, check out our in-depth interview with Ryaan Tuttle .

        References

        1. ↑ http://www.sunset.com/home/how-to-open-a-stuck-window-00418000072581
        2. ↑ https://www.youtube.com/watch?v=-RDvwKnoyXw
        3. ↑ https://www.youtube.com/watch?v=zpX_cTFj0Q4
        4. ↑ https://www.youtube.com/watch?v=jaAkRT-WgdU

        About This Article

        Article Summary X

        To open a stuck window, use a razor knife to cut along the edge of the window and frame across all 4 sides to loosen any paint that could be sealing the window shut. Alternatively, insert a putty knife between the window and frame and wriggle it back and forth to loosen any dried paint between the window and frame. Another way to open a stuck window is to rub the end of a candle along the channel where the window opens or spray a lubricant like WD-40 along the side of the window to help it move more smoothly. You can also reduce swelling that could be preventing your window from opening by running a hairdryer along the edges. To learn how to remove a window sash to help it move more easily, keep reading!

        Did this summary help you?
        In other languages
        Thanks to all authors for creating a page that has been read 409,170 times.

        Reader Success Stories

        • Colleen Bakker

          Jul 1, 2016

          "Very helpful tips on different ways to get the stuck window opened!"
        More reader stories Hide reader stories
        Share your story

        Did this article help you?

        Advertisement