Download Article
Download Article
More than a few warehouse workers and other people who need to move goods have found themselves confused with one of the simpler staples of an industrial environment: the hand or manual pallet jack. Pallet jacks are built to effectively transport the rough wooden platforms know as pallets or skids that so often contain all of the goods arriving from a truck at a warehouse or retail facility. Some simple steps will help a newbie sort through the challenges of how to operate a manual pallet jack well.
Steps
Download Article
-
Find the release lever. Stand behind the manual pallet jack as this is the position you will be in when you move it. Find the small lever that allows the pallet jack prongs (the large flat metal pieces near the floor) to drop all the way down toward the floor. [1] X Research source
- The pallet jack drop lever is often a small lever in the middle of the rounded handle, on the vertical stem of the manual machine. It may be distinguished by a different color of plastic, or otherwise marked, or it may not be.
-
Push inward on the drop lever to lower the prongs. If the prongs are already completely lowered, you will not see them move. The prongs should only be an inch or two from the floor. [2] X Research sourceAdvertisement
-
Put the prongs underneath the skid or pallet. You will see when approaching the skid whether or not the product will fit underneath. [3] X Research source If they will not fit, the machine has not been lowered sufficiently, so try to push again on the drop lever.
-
Use the handle to jack up the pallet jack. When the prongs are under the skid, pull the vertical stem toward you, away from the pallet and toward the floor in a diagonal motion. You should feel the pallet jack (and the pallet) slowly rising against the pressure of gravity. [4] X Research source
-
Check to make sure that the pallet jack is not on the cross wood of the skid, front wheels must be on the floor. If the wheels are on the cross wood this will stop the jack from going up and also stop it from rolling.
- Make sure that the pallet is jacked up from the floor before moving the manual pallet jack.
-
Move the pallet jack. When it looks and feels like the pallet is sufficiently raised so that it will not drag, pull on the pallet jack handle to move the raised pallet in any one direction. Alternately, users can push against the pallet when it's time to move the pallet up over a lift gate or onto a truck. [5] X Research source
Advertisement
Video
Community Q&A
Search
-
QuestionDoes it have a brake for stopping when the pallet jack is full?Community AnswerVery few are fitted with a brake. The easiest way to stop a potential runaway is to quickly squeeze the handle and drop the pallet to the floor.
-
QuestionI ordered a pallet truck of 3t capacity. The effort to pull 2000 kgs is not possible by a single person, so what is the solution if we need to move the load by a single person?Mzm555Top AnswererIt depends on the weight distribution of the load, the quality of the pallet jack, and the floor surface (particularly how smooth it is) with a good quality pallet jack, stable load, and flat, very smooth concrete. A 2000kg load can be sufficiently moved with some effort; however, with poor ground, a poor quality pallet jack, unstable loads, slopes, etc., it will be much more difficult for the pallet jack worker. For loads exceeding 2500kg, a motorized pallet jack, "walkie stacker" or Forklift is recommended.
-
QuestionWhat is the difference between a battery operated pallet truck and an electric pallet truck?Community AnswerThere is no difference, it's just a different name.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
Submit a Tip
All tip submissions are carefully reviewed before being published
Thanks for submitting a tip for review!
Warnings
- Wear appropriate footwear. A wrong turn with a manual pallet jack can cause contact with your feet. Many industrial jobs require steel toed boots to protect the worker against harm. In any case, don't try to operate a manual pallet jack wearing heels or other footwear that can cause the operator to walk in a less stable way. By the same token, make sure not to wear any long flowing clothes that can get caught in the machine.Thanks
Advertisement
References
About This Article
Thanks to all authors for creating a page that has been read 199,333 times.
Reader Success Stories
- "Having just got a job in a packing warehouse environment, pallet trolleys are everyday things. I was not getting the hang of how to know if I had trolley in right position. Your step-by-step pictures really helped." ..." more
Advertisement
88%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
"Having just got a job in a packing warehouse environment, pallet trolleys are everyday things. I was not getting the hang of how to know if I had trolley in right position. Your step-by-step pictures really helped."
..."
more
"Pictures are crystal clear and steps are easy to understand. It helped me perfectly for my new job. Thanks to all the authors who created this."
..."
more
