PDF download Download Article PDF download Download Article

Melamine is a synthetic resin made by mixing melamine and formaldehyde, and it is a common binder for house or furniture paint. This paint is durable, so it is often used to paint laminate surfaces, such as cabinets or furniture. It is also very commonly used to cover particle board at pre-fabricated or flat-pack furniture shops. Use a sander and clean all of the surfaces before painting the melamine. Then apply primer and melamine paint to give a kitchen cupboard or an old piece of furniture a new lease on life!

Part 1
Part 1 of 2:

Sanding and Cleaning the Surfaces

PDF download Download Article
  1. Place newspaper, a tarpaulin, or a drop cloth on the floor below your project. Ventilate the area by opening all windows, and turning on a fan if possible. [1]
    • If there are other objects close by that you cannot move out of the way, also cover these with a drop cloth to protect them
  2. Attach 150 grit sandpaper to the sander, and sand every area that you are planning to paint. Pay special attention to the edges and any detailing. [2]
    Advertisement
  3. Apply the deglosser with a paintbrush, and leave it to soak into the wood for 15 minutes. Then wipe it off with a cloth. [3]
    • Make sure that you are working in a well-ventilated area.
    • Liquid deglosser takes the shine off surfaces and makes them dull to prepare for painting.
  4. Clean away all loose wood, coating, and dust particles from your project. Check all of the joints and corners to make sure that you haven't missed a spot.
    • If there is a big mess, you can always vacuum or sweep away the dust first before using a tack cloth.
  5. Dilute 4 ounces (110 g) of TSP powder into 2 gallons (7.6 L) of warm water. Use a sponge to wipe down all surfaces with the solution. Then use a clean rag to rinse all of the surfaces with fresh, clean water.
    • Always wear gloves when using TSP to avoid irritating your skin.
  6. Advertisement
Part 2
Part 2 of 2:

Applying Primer and Paint

PDF download Download Article
  1. Use a paintbrush to apply a primer that is specifically for melamine. Target all of the areas that you cannot easily reach with a roller. [4]
    • Primers that are specifically for laminate wood are an alternative option.
  2. Roll the primer in one direction across each surface. Ensure that the roller always sounds crinkly and wet, and if it loses that sound, apply more primer. [5]
    • If you are using a new roller cover that has fibers, wrap it in masking tape before you use it. Rip off the masking tape to remove any loose fibers that would have otherwise been stuck to your project. [6]
  3. Use 220 grit sandpaper to smooth over any drips or other marks caused by the primer. Wipe over the sanded surfaces with a tack cloth again. [7]
    • The instructions that are on the primer will indicate how long it will take to dry. This normally takes around 4 hours.
  4. Cover the full surface of the kitchen cupboards or furniture again. Wait for the primer to dry. [8]
    • You don't need to sand the surface again after the second coat of primer, unless you notice more bumps or imperfections.
  5. Use a foam roller to evenly coat all surfaces with paint. Let the first coat dry for 6-8 hours. [9]
    • If you prefer to use a paint brush, brush against the grain first and then brush with it. [10]
    • Paint applied to melamine takes longer to dry than on wood. This is because melamine isn’t as absorbent.
    • You can buy paint specifically for melamine surfaces from home improvement stores.
    EXPERT TIP

    Sam Adams

    Professional Contractor
    Sam Adams is the owner of Cherry Design + Build, a residential design and construction firm, which has been operating in the Greater Seattle Area for over 13 years. A former architect, Sam is now a full-service contractor, specializing in residential remodels and additions.
    Sam Adams
    Professional Contractor

    Working on a cabinet? Sam Adams, design firm owner, advises: “Don't paint it if it's a cabinet you use all the time. In a year or so, the paint will start chipping off around the handle because you touch the door every day. And if you paint a laminate cabinet, the paint will chip off all over. Painting a cabinet is like a Band-Aid. I think it’s better to just replace the entire cabinet .”

  6. Use either a foam roller or paintbrush again to apply paint to all of the surfaces. Let the final coat dry for 24 hours. [11]
  7. Start with the back or inside of any doors to cupboards, so that you can get used to spray painting there first. Then spray paint your entire project, and let it dry overnight. [12]
    • Wear a respirator mask at all times when working with spray paint.
    • Check that the spray paint can be used on melamine surfaces by reading the label before you purchase it.
    • Apply a second coat with spray paint if you need to once the first coat is dry.
  8. Advertisement

Expert Q&A

Ask a Question
      Advertisement

      Video

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!

      Warnings

      Advertisement

      Things You’ll Need

      • Newspaper, tarpaulin, or drop cloth
      • Sander
      • Sandpaper
      • Liquid deglosser
      • Cleaning cloth
      • Tack cloth
      • TSP
      • Gloves
      • Primer
      • Paint brushes
      • Rollers
      • Melamine paint

      About This Article

      Article Summary X

      To paint melamine, you'll need primer designed specifically for melamine or laminate wood as well as some melamine paint. To get started, rough up the melamine with 150-grit sandpaper so the primer and paint sticks to it better. You can apply a liquid deglosser to the melamine for 15 minutes instead if you're in a rush. Next, apply 2 coats of primer, letting it dry after each coat. Finally, apply 2 coats of melamine paint using a paintbrush or spray canister and then let everything dry for 24 hours. To learn how to clean melamine before painting it, read on!

      Did this summary help you?
      Thanks to all authors for creating a page that has been read 546,690 times.

      Reader Success Stories

      • Vivian Clayton

        Aug 11, 2017

        "I've painted many different things, but I'm impatient and have often skipped the prep work of sanding and ..." more
        Rated this article:
      Share your story

      Did this article help you?

      Advertisement