PDF download Download Article PDF download Download Article

If your bathroom is due for a makeover, breathe new life into it with a fresh paint job. Since bathroom paint has to handle lots of moisture, go with a durable, mildew-resistant product. Before you get to work, lay down drop cloths to keep paint off of the floor and fixtures. Then use a good angled brush to tackle the trim, and cover broader surfaces with a paint roller. With the right tools and a little effort, you can brighten up your bathroom in no time at all!

Part 1
Part 1 of 3:

Preparing Your Bathroom

PDF download Download Article
  1. Bathroom paint faces a lot of wear and tear, so go with a water-repellent, easy-to-maintain product. Since they're more durable and easier to clean than matte or flat options, go with a satin or semi-gloss paint for your bathroom. [1] The only downside is they highlight imperfections, so it's important to prep surfaces before you paint. [2]
    • As for color, look for a shade that complements the hallway or room next to the bathroom. Lighter shades are usually good choices for smaller spaces.
    • Paint manufacturer websites often allow you to upload a photo of your room to play with wall colors. It's also wise to purchase samples and test shades in the actual space. Keep in mind glossier finishes reflect more light, which makes colors appear brighter.
  2. Clear out any wall art, shelves, window treatments, and towel racks that could get in the way of your paint job. Unscrew electrical outlet and wall switch covers, then replace the screws so you don’t misplace them. [3]
    • If you’re also painting a sink vanity or cabinet, remove the knobs and other hardware.
    Advertisement
  3. if you can't fit a roller or paint tool behind it. If there’s a little space between the toilet and the wall, you can simply purchase a thin sponge stick that’s specially designed to paint and clean behind a toilet. Find one online or at a home improvement store. Otherwise, turn off the water supply, flush the toilet to drain it, then begin removing it. [4]
    • If the tank is removable, loosen the nuts that secure its mounting bolts to the bowl. If the bowl still blocks the wall, unscrew the floor bolts at the base, then lift the bowl out of place.
  4. Paint can’t adhere to surfaces covered with dust, grime, or mildew, so clean the walls with a mix of 1 part bleach and 3 parts warm water. Soak a sponge or mildly abrasive pad in the solution, wring it out, and scrub all surfaces you plan on painting. It might seem like a lot of work, but you wouldn’t want your new paint to start peeling in only a matter of months. [5]
    • Alternatively, dilute concentrated TSP (trisodium phosphate) cleaner with water as directed. TSP is a stronger cleaner, so you won't have to scrub as hard.
    • Wear rubber gloves when using TSP or a bleach solution. If your bathroom has a window, open it; if not, turn on the exhaust fan.
  5. Tuck or tape the edges of the drop cloths against the baseboard to protect the floor. Canvas drop cloths are best for the floor, but you can tape sheets of plastic over the sink, tub, and other fixtures. [6]
    • Canvas is heavier and less slippery than plastic. It also absorbs paint, which makes it less likely that you’ll step in a spill and accidentally make tracks around your house.
    • If you left any fixtures on the wall, like toilet paper holders or towel, put painter's tape around them to protect them from paint splatters. [7]

    Word of caution: Since canvas is absorbent, you’ll need to clean up any big spills before the paint seeps through the canvas. For an extra of layer protection, you could also tape down a sheet of plastic, then lay the canvas drop cloth over it.

  6. Shine a bright light over the walls and trim to spot areas that need patching. Use a putty knife to patch problem areas, then scrape off excess compound to create a smooth surface. [8]
    • Use wood filler to repair any holes or nicks in the baseboard, chair rails, or trim around windows and doors. Allow the filler or drywall compound to dry for 6 to 24 hours (check the instructions for specific drying times). Then sand the surface with fine, 320-grit sandpaper until it’s smooth and level with the surrounding surface. [9]
    • You may also want to recaulk around your tub or base trim before you paint the bathroom. [10]
  7. Advertisement
Part 2
Part 2 of 3:

Painting the Ceiling and Trim

PDF download Download Article
  1. If you’re painting the ceiling, use a brush to cut in around the edges where it meets the walls. Finish the job by using a roller on the end of an extension pole. For best results, use a quality, plush roller cover, which will allow you to get as much paint onto the ceiling in the shortest amount of time. [11]
    • Dip the roller into the paint tray's well, then roll up the tray to remove excess. Start in a corner, and roll in a continuous stroke. Try to keep the roller wet, and overlap the painted edges and your previous strokes by about 3 in (7.6 cm).
    • If you’re using a latex paint, you should be able to apply a second coat after 4 hours. For even coverage, apply the first coat in one direction, or north to south, and the second in the other direction, or east to west.
    • Cutting in is basically coloring within the lines; it's when you hug a tight edge with the brush.

    Tip: Choose mildew-resistant ceiling paint, which is flat (not glossy), dries slowly, and spatters less. While mildew-resistant products are a bit pricier, but they hold up better to moisture and last longer. [12]

  2. Use an angled brush to paint baseboards and other trim. Paint them first so you don’t have to tape off the walls, which is more difficult than taping off trim. Depending on the type of paint you’re using, apply a second coat after 4 to 24 hours. [13]
    • Semi-gloss is a good finish for bathroom trim. Baseboards, chair rails, and window and door trim collect dust and grime, and semi-gloss is more durable and easier to clean than flat finishes. [14]
    • White is conventional for trim, but you could experiment with color, especially if your walls are white. Grays, blues, and black are trendy choices if you want your trim to make a statement. [15]
  3. Tape off the trim if you’re not confident about cutting in along edges. If you have a steady, practiced hand, you don’t need to tape around every edge. However, if you want to stay on the safe side, allow the trim to dry for 24 hours, then lay down painter’s tape at the edges where it meets walls.
    • Additionally, tape around your bath fixtures and wall tile.
    • Even if you have a steady hand, you should still tape horizontal trim, such as baseboards, chair rails, and horizontal runs of tile. Paint will inevitably spatter on horizontal trim, but vertical trim, such as window and door trim, is less vulnerable.
  4. Advertisement
Part 3
Part 3 of 3:

Adding Coats to the Walls

PDF download Download Article
  1. If your current paint is in good shape, you made no repairs, and you’re not making a drastic color change, you can skip priming or use a self-priming paint. However, if your bathroom is currently dark and your new color is light, it’s wise to prime. Use the same techniques for primer as you would for the top coats: cut the edges with a brush first, then use a roller to paint broader areas. [16]
    • You should also spot-prime any areas you patched. Drywall compound is porous and will absorb paint, resulting in noticeable dull spots. Priming your repairs will help keep them inconspicuous. [17]
  2. Dip the brush in paint, tap off excess, and cut in about 1 2  in (1.3 cm) from the edge of the wall. Then turn back and bring the tip of the brush to the trim, taking care not to paint beyond the edge of the wall. To prevent unsightly lines, paint along the edges of 1 wall, then finish the rest of the wall with a roller before moving on to the next one.
    • Complete 1 wall at a time so you're always painting over wet paint. Painting over dried or tacky paint leads to noticeable lap lines. If you paint the trim all around the room, it’ll dry by the time you pass the roller over the rest of the wall.
    • Go with a satin or semigloss finish for bathroom wall paint. These finishes strike a balance between disguising imperfections and durability. [18]
  3. Fill the well of a paint tray, dip the roller, and roll it over the tray to get rid of excess paint. Start at a corner, and run the roller over the wall in a vertical stroke along the full height of the wall. With each pass, overlap both the previous stroke you made with the roller and the paint along the wall’s edges.
    • When you’ve finished the first wall, proceed to the next. Paint the edges with a brush, and use a roller for the larger areas.
    • Dip the roller in paint frequently and avoid letting the roller dry out. You don’t want it dripping with paint, but keeping it wet helps prevent lap lines.
  4. Allow the recommended drying time before applying another coat. For latex paint, you should be able to apply a second in 4 hours; oil-based paints may require 24 hours. [19]
    • Check your product's instructions if you're not sure about the recommended drying time.
  5. Use the same techniques to apply the second coat of paint. Paint around the edges of a wall with a brush, then use a paint roller to finish the wall. [20]
    • Remember to paint 1 wall at a time to avoid painting over dried paint.
  6. After the paint has dried completely, cut along the edge of the taped trim with a utility knife, then pull back the tape. Fold up and store the drop cloths, remove the coverings from the bath fixtures, and replace any wall art, curtains, electrical covers, and towel racks. [21]
    • If necessary, replace the toilet and turn on the water supply.
    • If you pull up the tape without cutting it, you might peel off dried paint from the wall that’s bonded with the tape.

    Important: After painting the bathroom, avoid showering in it for 24 hours so the paint can dry properly.

  7. Advertisement

Video

Expert Q&A

Search
Add New Question
  • Question
    What kind of paint is best for a bathroom?
    Patrick Coye
    Painting Specialist
    Patrick Coye is the owner and operator of Patrick’s Painting & Home Improvement in Alexandria, Virginia. With over 15 years of experience in residential construction, Patrick specializes in painting, wallpaper removal/installation, drywall, staining decks and fences, and kitchen cabinetry painting. To date, Patrick and his team have painted over 2,000 houses and stained over 800 decks. Patrick's Company won a "Top Job" award from the American Painting contractor magazine in 2020.
    Painting Specialist
    Expert Answer
    Pick a satin or semi-gloss paint that's labeled as mildew-resistant. Satin and semi-gloss paint are both durable and easy to clean. Additionally, there's a lot of moisture in the bathroom, so you want the paint to resist mildew.
  • Question
    How do you prepare a bathroom for painting?
    Patrick Coye
    Painting Specialist
    Patrick Coye is the owner and operator of Patrick’s Painting & Home Improvement in Alexandria, Virginia. With over 15 years of experience in residential construction, Patrick specializes in painting, wallpaper removal/installation, drywall, staining decks and fences, and kitchen cabinetry painting. To date, Patrick and his team have painted over 2,000 houses and stained over 800 decks. Patrick's Company won a "Top Job" award from the American Painting contractor magazine in 2020.
    Painting Specialist
    Expert Answer
    First, take anything out of the room you can, and cover whatever's left with drop cloths or painter's tape. Once everything's covered, make any repairs, like filling nail holes and cracks or recaulking the tub and base trim. From there, you can get into the painting—start with the ceiling, then paint your door frames and doors, then walls, then the base trim.
  • Question
    Do I need to prime the bathroom walls before painting them?
    wikiHow Staff Editor
    Staff Answer
    This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.
    wikiHow Staff Editor
    Staff Answer
    It’s usually a good idea, especially since the high humidity levels in a bathroom can make it harder for paint to go on evenly. Look for a primer that contains an anti-fungal compound to help reduce problems with mold and mildew.
See more answers
Ask a Question
      Advertisement

      Tips

      • If your style is modern, cooler tones, such as a white with subtle blue undertones, are best. Cozy, warm hues, such a white with yellow undertones, are ideal if your taste is more traditional. [22]
      • Stir the paint before you pour it into a tray or dip a brush in the can. Stirring helps evenly distribute the pigments.
      • If you taking a break for more than 10 minutes, cover the can or container to keep the paint from clumping.
      Show More Tips
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • If you need to use a ladder, make sure it’s set on a stable, level surface. Wear non-slip shoes, and keep both feet on a rung at all times.
      • Open windows, if available, or keep the exhaust fan on to ventilate the bathroom. Consider using a respirator if the exhaust fan doesn’t connect to an external vent.
      Advertisement

      Things You'll Need

      • Bleach or TSP cleaner
      • Sponge or scrub pad
      • Rubber gloves
      • Paint (preferable mildew-resistant)
      • Painter's tape
      • Angled brush
      • Paint roller
      • Paint tray
      • Extension pole
      • Canvas drop cloths
      • Paint can key or screwdriver
      • Utility knife
      • Ladder (optional)
      • Primer (optional)

      About This Article

      Article Summary X

      To paint a bathroom, use a mildew-resistant, satin or semi-gloss paint since they're durable and water resistant. To get started, clean the bathroom walls and cover anything that you don't want to paint with plastic or drop cloths. Then, paint the ceiling and trim first, using a roller for most of the ceiling and a paint brush for the edges and trim. Next, apply a paint primer to the walls if you're making a drastic color change or patching any holes. Finally, use a roller and paint brush to apply 2 coats of paint to the walls, letting them dry after each coat. To learn how to repair holes or cracks before painting the walls, scroll down!

      Did this summary help you?
      Thanks to all authors for creating a page that has been read 357,518 times.

      Reader Success Stories

      • Kat Hanson

        Mar 30, 2016

        "I love the suggestions for what to do first. For example, I didn't think to do the ceiling first. Also, the ..." more
      Share your story

      Did this article help you?

      Advertisement