How to Paint a Refrigerator

PDF download Download Article
PDF download Download Article

Painting furniture is all over Pinterest lately, but tables and chairs aren’t the only things that can be decked out with colors and designs. You can also paint your refrigerator! Whether you use a roller to avoid splatters and stains or use spray paint for a much faster fix, revamping your refrigerator is easier than you’d think. But be warned: a pretty fridge makes that midnight snack way more tempting!

Get Product Support Solve Any Problem

wH
Hi there! Do you have a question about how to use or repair your home appliance? I’ve read the manuals so you don’t have to. Select your product, brand, and model, then ask away!
*
*
Method 1
Method 1 of 3:

Getting the Refrigerator Ready for Painting

PDF download Download Article
  1. You’ll need enough room to be able to get to the sides and the top of the fridge. Moving it away from counters or other appliances also protects those pieces from getting paint on them. [1]
    • Never paint a fridge or clean it with liquids while it's plugged into an electrical outlet. It could electrocute you.
    • Have a friend help you if the refrigerator is too heavy to move by yourself.
    • Empty the food in the refrigerator and the freezer into a cooler or backup fridge. Otherwise, since the refrigerator will be unplugged, the food will go bad.
  2. Both standard paint and spray paint give off dangerous fumes, so don’t paint in a closed-in space. Your best option is outside, like in the backyard or on a deck. [2]
    • If you’re spraying inside, like in a workshop or the kitchen, open all of the windows and turn on the fans to help air out the room.
    • Wearing a mask will also prevent you from inhaling all of the fumes.
    • You'll likely need a friend or family member to help you relocate the fridge. Use a dolly to wheel it to wherever you're going to spray it.
    Advertisement
  3. Painting can be a messy task, and you don't want to ruin your floors, grass, or decking. Lay down a drop cloth as protection against stains. [3]
    • You can buy drop cloths at a paint store or a hardware store.
    • If you don’t have a drop cloth, lay out a tarp, trash bags, or an old sheet instead.
    • Be careful trying to lift the fridge. Ask someone to help you, or lift one corner at a time by yourself and slide the drop cloth underneath.
  4. Clean the exterior of the fridge with soap and warm water. Any dust or grime left on the outside of the refrigerator will mess up the paint and prevent it from going on smoothly. Use a damp cloth or microfiber towel to wipe the front, sides, and top. [4]
    • Let the fridge air dry. Don’t brush it with a towel because that could leave lint behind, which makes the paint look bumpy.
    • Use an air compressor to dust any nooks and crannies, like the crack between the door and the fridge. This will also remove food particles.
    • A mixture of 1 part white vinegar and 1 part water will work if you don’t have soap or want a natural alternative.
  5. [5] Use medium-grit sandpaper to remove the gloss. This will help the paint adhere to the refrigerator’s surface better. Scrub gently but firmly with medium-grit sandpaper, like 180-grit, which strips away the varnish without damaging the refrigerator itself. [6]
    • If your fridge is already painted, you don’t need to take off all of the paint. You only need to sand off the glossy finish.
    • You can wipe the refrigerator down with a damp cloth after sanding if there’s a lot of dust buildup.
  6. This includes door handles, hinges, or rubber seals. Press the tape firmly around the spots you want to protect so that paint can’t seep underneath. [7]
    • Use a spoon or your fingernail to smooth down the tape as securely as possible.
    • You can also remove the handles or hinges with a screwdriver or wrench if you don’t want to risk getting paint on them. Set them somewhere safe where you won't lose them.
    7. Advertisement
Method 2
Method 2 of 3:

Painting the Refrigerator with a Roller

PDF download Download Article
  1. [8] The coat of primer will help seal and smooth the surface before you paint.
    • You can also use a two-in-one paint and primer in the colour of your choice. Not only does it save you from having to prime the fridge separately, but it also tends to be a thicker paint. That helps avoid splatters and drips, as well as provides more coverage. [9]
    • Apply 1 to 2 coats of primer with a foam roller, letting each coat dry for 4 to 6 hours.

    How to Choose a Paint Color and Design

    If you want a customizable fridge , opt for chalkboard paint. You can write your grocery list, the menu for the week, or silly doodles in chalk, then erase them and start over.

    For a vintage look , paint the entire fridge in a retro pastel colour like pale pink or robin’s egg blue.

    If you’d like a funky pattern , use painter’s tape to tape off sections in a design. For example, make a colour-blocked fridge by taping a diagonal line across the front and spraying the top half in one colour and the bottom half in a contrasting colour.

    For a smudge-free fridge , avoid paint with a flat finish, which tends to show every fingerprint. Look for satin or gloss instead.

  2. Use a wooden paint stick or a spoon to mix the paint immediately before using it. Then carefully fill the deep end of the paint tray. Refill the tray as needed as you paint. [10]
    • If you don’t stir the paint, it will be runny and cause drips in your coats.
  3. Use slow, even strokes to roll the paint onto the surface of the refrigerator. Multiple thin layers is better than 1 super thick layer, which is more prone to chipping or dripping. [11]
    • Saturate the roller completely by rolling it in the paint tray. This helps the paint go on smoothly without streaks.
    • It should take each coat about 4 to 6 hours before you can paint the next one.
    • If you don’t let the paint dry completely before applying the next coat, you’ll just smear and ruin the previous coat.
    • Don’t forget to paint the top of the fridge! It's best to start with the top so you don't smudge the sides while trying to reach it.
  4. Your roller, no matter how small it is, won’t be able to get in around the handle or hinges, for example. An angled brush is perfect for painting trim or smaller spaces, like the edge of the door. [12]
    • A small watercolour brush will work if you don’t have an angled brush.
  5. Don’t try to return the fridge to its original spot if the paint is not totally dry. Otherwise, you could mess up some of your hard work or get paint on a nearby counter or piece of furniture. [13]
    • Check the instructions on the paint can if you aren’t sure how long to let it dry.
    • Clean up any mistakes, like paint that got somewhere it wasn’t supposed to, with a cloth or Q-tip dipped in rubbing alcohol. Scrub the area to remove the paint. [14]
    • Roll on a layer of polycrylic sealant after your paint is dry if you want extra protection. Use a foam roller to apply 1 coat of the sealant, then let it dry for 72 hours. [15]
    6. Advertisement
Method 3
Method 3 of 3:

Spraying the Refrigerator

PDF download Download Article
  1. Primer will help the spray paint stick to the refrigerator. Hold the can about 8 inches (20 cm) away from the fridge as you spray, moving the can back and forth constantly to avoid spraying too heavily in one area. [16]
    • An oil-based primer will help prevent rust, too.
    • Shake the primer can for 1 minute before you start spraying.
  2. Check the instructions on your can to see how long the drying time is for that specific type of paint. It can vary from 30 minutes to 3 hours based on the manufacturer. [17]
    • Leaving the primer to dry overnight will ensure it’s totally dry before you start painting.
  3. Since spray paint is hard to control in a small space, tiny patterns or multicoloured designs are difficult to do. Stick to a solid colour or 2 complementary colours so your paint job looks professional instead of sloppy.
    • For example, if your colour scheme is navy, baby blue, and cream, paint the top half baby blue and the bottom half navy.
    • Neutrals like white, black, gray, or chrome are always good options for a subtler effect.
    • Avoid eggshell or matte finishes that show fingerprints and smudges.
  4. Instead of spraying one thick coat, spray multiple lighter layers to prevent dripping. It’s also best to hold the can about 8 inches (20 cm) away from the refrigerator while you spray, just like you did for the primer. Allow each coat to dry before you apply the next coat. [18]
    • Shake the paint can for at least 1 minute before you start spraying to thicken it up.
    • If you notice any drips once a coat has dried, use a piece of fine, 150 to 220 grit sandpaper to lightly sand it off.
    • Spray paint should dry enough in 1 to 2 hours for you to apply a new coat.
    • Wear latex gloves while spraying if you want to avoid staining your hands with the paint.

    Spray Paint FAQs

    What causes my paint to look speckled?
    Those pesky “freckles” tend to pop up when you’re painting in a spot that’s too cold or too humid. [19]

    Why do I keep getting drips when I spray? You’re most likely spraying too close to the surface, applying coats that are too heavy, or not waiting for 1 coat to dry before spraying the next one. Also, some spray paints are simply thinner and runnier than others.

    Does my spray paint need to be sealed? Nope! But spraying a sealant over your paint does help protect it from everyday wear and tear.

  5. If you try to take the fridge back inside when it’s not totally dry, you could smudge or chip the paint. It will dry best in a warm, dry spot. [20]
    • Paint takes longer to dry in high humidity or cool temperatures.
    • If you want to prolong the life of your paint, you can spray a protective sealant over it once the paint is dry. Apply 1 coat of sealant and let it dry for at least 72 hours. [21]
    • A spray enamel sealant will prevent the refrigerator from rusting.
    6. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    How do you paint an old fridge?
    James Guth
    Painting Specialist
    James Guth is the co-owner and founder of Chesapeake Painting Services LLC. With over 20 years of experience, James specializes in exterior and interior painting, drywall, powerwashing, wallpaper, staining, sealing, and carpentry. James holds a BS in Economics and Business Administration with a concentration in Finance from Towson University
    James Guth
    Painting Specialist
    Expert Answer
    I recommend you sand the surface well, wipe it down, then use direct-to-metal primer and paint.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 11
  • Question
    What kind of paint should be used to paint a refrigerator?
    Community Answer
    Use Rustoleum Appliance Epoxy. Spray paint is the easiest way to apply, but can be brushed on as well. It can be purchased from most hardware stores.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 17 Helpful 54
  • Question
    Will painting the fridge affect the magnetism?
    Community Answer
    No, but do not get paint into electrical areas, as it may cause issues with the fridge.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 11 Helpful 29
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Things You’ll Need

      Getting the Refrigerator Ready for Painting

      • Cloth or microfiber towel
      • Soap
      • Water
      • Painter’s tape
      • Medium grit sandpaper
      • Drop cloth

      Painting the Refrigerator with a Roller

      • Paint + primer in one
      • Tray
      • Roller
      • Small, angled paintbrush
      • Sealant (optional)

      Spraying the Refrigerator

      • Spray primer
      • Spray paint
      • Sandpaper (optional)
      • Sealant (optional)

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!

      Warnings

      Advertisement

      You Might Also Like

      How to
      Test an Evaporator Fan Motor
      How to
      Adjust Your Fridge to the Right Temperature
      Easy Steps to Remove & Replace a Fridge Door Seal
      3 Ways to Stop & Prevent Ice Build Up in Your Fridge & Freezer
      How to
      Put Freon in a Refrigerator
      How to
      Level a Refrigerator (With Leveling Feet or Rollers)
      How to
      Change the Side on Which Your Refrigerator Door Opens
      How to
      Test a Refrigerator PTC Relay
      How to
      Move a Fridge (For Cleaning or a Long-Distance Move)
      Why Your Refrigerator Is Freezing Your Food (And How to Fix It)
      How to
      Defrost a Samsung Ice Maker: A Quick Guide
      Easy Methods to Reset Your Samsung Refrigerator
      How to
      Remove a Scratch from a Stainless Steel Refrigerator Door
      How to
      Replace a Water Filter in a Kenmore Fridge
      Advertisement

      References

      1. ↑ https://www.younghouselove.com/how-to-paint-a-refrigerator/
      2. ↑ https://www.cravingsomecreativity.com/how-to-paint-a-refrigerator/
      3. ↑ https://www.apartmenttherapy.com/how-to-paint-a-refrigerator-233118
      4. ↑ https://www.thekitchn.com/how-to-clean-the-refrigerator-cleaning-lessons-from-the-kitchn-203976
      5. ↑ James Guth. Painting Specialist. Expert Interview. 21 July 2020.
      6. ↑ https://www.apartmenttherapy.com/how-to-paint-a-refrigerator-233118
      7. ↑ https://www.apartmenttherapy.com/how-to-paint-a-refrigerator-233118
      8. ↑ James Guth. Painting Specialist. Expert Interview. 21 July 2020.
      9. ↑ https://cozycrookedcottage.wordpress.com/2013/02/06/diy-painted-refrigerator/
      1. ↑ https://www.erinspain.com/how-to-paint-furniture-a-beginners-guide/
      2. ↑ https://www.erinspain.com/how-to-paint-furniture-a-beginners-guide/
      3. ↑ https://cozycrookedcottage.wordpress.com/2013/02/06/diy-painted-refrigerator/
      4. ↑ https://www.apartmenttherapy.com/how-to-paint-a-refrigerator-233118
      5. ↑ https://cozycrookedcottage.wordpress.com/2013/02/06/diy-painted-refrigerator/
      6. ↑ https://www.countryliving.com/diy-crafts/tips/a266/paint-furnishings-and-learn-from-my-mistakes/
      7. ↑ https://momadvice.com/post/how-to-spray-paint-furniture
      8. ↑ https://www.apartmenttherapy.com/how-to-paint-furniture-222412
      9. ↑ https://www.cravingsomecreativity.com/how-to-paint-a-refrigerator/
      10. ↑ https://www.homestoriesatoz.com/furniture/how-to-flawlessly-spray-paint-furniture.html
      11. ↑ https://www.apartmenttherapy.com/how-to-paint-a-refrigerator-233118
      12. ↑ https://www.countryliving.com/diy-crafts/tips/a266/paint-furnishings-and-learn-from-my-mistakes/

      About This Article

      Article Summary X

      To paint a refrigerator, start by unplugging it and cleaning the outside with soap and warm water so the paint goes on smoothly. Then, sand the fridge with medium grit sandpaper to remove the glossy finish. Once the finish is off, apply 3 coats of a two-in-one paint and primer using a roller and small, angled brush. For a vintage look, go with a retro pastel color like robin's egg blue or pale pink. If you want to be able to write on your fridge with chalk, try chalkboard paint. Whichever paint you use, let it dry for at least 24 hours before plugging the fridge back in. To learn how to spray paint a refrigerator, scroll down!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 534,214 times.

      Reader Success Stories

      • emmanuel richter

        Jul 19, 2017

        "My old refrigerator door fell off because the bottom had rusted. I had no money to buy a new one, so I I Googled to ..." more
      More reader stories Hide reader stories
      Share your story

      Did this article help you?

      Advertisement