3 Easy Ways to Paint a T Shirt

Ever wanted a specific shirt for a party, rally, or event but couldn't find the right one? Or perhaps you needed something to do on a boring summer day? Why not paint a t-shirt? It is a great way to turn a plain, boring t-shirt into something creative and unique. There are many ways of painting t-shirts, from free-handing to using stencils to spray painting! Whichever method you choose, you are bound to end up with something creative and unique.

Best T-Shirt Painting Method

Wash your T-shirt and place it on a clean newspaper.
Place a piece of cardboard inside the shirt so the paint doesn’t bleed through.
Use fabric paint to paint on a design.
Let the paint dry completely before removing the cardboard from the shirt.

Method 1

Method 1 of 3:

Using Paintbrushes

Download Article

Even if the label on your shirt says "pre-shrunk," it would still be a good idea to wash it. This will remove any potential starch or stiffener that might prevent the paint from sticking properly.
Spread some newspaper on a table, and get anything that might get ruined out of the way. It might also be a good idea to have some paper towels (for blotting) and a cup of water (for rinsing the paintbrush) handy as well.

Advertisement
3
Place a piece of cardboard inside the T-shirt. The cardboard should be about the same size as the shirt. You want it to slip inside the shirt easily without stretching it. This will prevent the paint from bleeding onto the back of the shirt.
- You can also use a folded up newspaper for this. Even an old magazine or catalogue will do in a pinch.
4
Paint your design using fabric paint. If you are nervous about free-handing the design, you can always trace your design first using a stencil and a permanent marker, and then fill it in. Consider using a few paintbrushes in different shapes and sizes; a flat brush will give you some nice, crisp edges while a pointy brush is great for detail.
- If you want your design to have multiple colors, such as a smiles face, do the background color first. Let the paint dry, then do the details.
- Try to get paint brushes meant for painting fabric. They usually have stiffer bristles made from taklon. Avoid natural brushes, such as camel hair, as they will be too soft to hold the thick paint and create nice designs.
5
Let the paint dry. If you'd like, you can speed up the drying process by blowing the paint with a hair dryer. Do not remove the cardboard inside the shirt until the paint is completely dry.
- Once the paint dries, you can flip it around and paint the back as well. Keep the cardboard inside the shirt and let the paint dry.
If the paint is sticking to the cardboard, don't panic. Simply wiggle your finger between the shirt and the cardboard to pry it apart. Discard the cardboard when you are done, or save it for another project.

Method 2

Method 2 of 3:

Using Stencils

Download Article

This will remove any potential shrinking and starch. It will make the paint stick to the shirt better.
Cover up your table with lots of newspaper. You might also want to have some paper towels, cups filled with water, and paper plates (or palettes) handy.
This will keep the paint front transferring to the back of the shirt. If you don't have any cardboard, you can also use a folded up newspaper or an old magazine. Be sure to smooth out any wrinkles.
4
Position your stencil, and make sure that it is secure. You can use a fabric painting stencil, a regular stencil, or you can make your own out of thin plastic, freezer paper, or cardstock. You can even use painter's tape to create geometric designs! Make sure that the stencil is laying flat against the shirt, or the paint will bleed under the edges.
- If you are using a stencil meant for painting fabric, it will likely have a sticky back. All you have to do is smooth it down.
- If you are using a regular stencil, or if you made your own, coat the back of the stencil with repositionable adhesive spray, then press the stencil down. ^{[1]
  X
  Research source}
- If you are using freezer paper, iron the paper shiny-side-down onto the t-shirt. Peel it away after you paint the shirt. ^{[2]
  X
  Research source}
If you'd like to work with multiple colors, it might be a good idea to use a larger plate, or a several smaller plates—one for each color.
You can also apply the paint using a mini paint roller (preferably rubber). ^{[3]
X
Research source} Lastly, you can also use a paintbrush. This will be great for delicate stencils.
^{[4]
X
Research source} Keep dabbing and tapping until you get the coverage you want. If you are using a paint roller, simply roll it on. Try to work inwards, going from the stencil's edges towards the middle. This will prevent the paint from accidentally leaking under the stencil. ^{[5]
X
Research source}
Fabric paint will form a thick layer as it dries, and if you remove it too late, you will run the risk of the paint tearing.
This will give you a longer lasting design. Place a piece of cotton fabric over the design, then press an iron over it. ^{[6]
X
Research source}
Now your shirt is ready to wear and show off!

Method 3

Method 3 of 3:

Using Spray Paint

Download Article

^{[7]
X
Research source} Even if your shirt says "pre-shrunk" on it, it would still be a good idea to wash it. T-shirts are also coated with a starchy material to help them lay more smoothly in the store. This starchy material can prevent paint from sticking.
This will keep the spray paint from bleeding onto the back of the shirt. The newspaper or cardboard should be big enough to fit inside the shirt without stretching it. Be sure to smooth out any wrinkles of ripples. ^{[8]
X
Research source}
3
Position your stencil, and secure, if necessary. You can use a stencil meant for fabric painting, or a regular stencil. You can also make your own out of thin plastic, freezer paper, or cardstock. You can even use painter's tape to create chevron stripes! Make sure that the stencil is laying flat against the fabric. If it isn't, the paint will seep under the edges and create a blurred design.
- If you are using a fabric painting stencil, it will probably have a sticky back. Simply press it onto the shirt and smooth it down.
- If you are using a regular stencil, or if you made your own, spray the back of the stencil with repositionable adhesive spray, then press it down onto the shirt.
- If you are using freezer paper, simply place the stencil shiny-side-down onto the shirt, then run a clothing iron over it.
4
Move to a well-ventilated area and get set up. Ideally, you should work outside, but if you can't, a large room with lots of open windows might do. Cover your work area with lots of newspaper, and put on some old clothes or an apron. Lastly, consider putting on a pair of plastic gloves; spray painting can get messy. ^{[9]
X
Research source}
- If you are working indoors and start to feel lightheaded, take a break and go outside for some fresh air.
5
Spray the shirt. Shake the can for 30 to 60 seconds first, then hold it 6 to 8 inches (15.24 to 20.32 centimeters) away from the stencil. Spray the paint on using a long, sweeping motion. Don't worry if the paint is not thick enough. You can always do another layer or two.
- Consider spraying the design using clear sealer first. This will give you better control over the paint and prevent it from soaking into the fabric. Be sure to let the sealer dry before applying the paint. ^{[10]
  X
  Research source}
^{[11]
X
Research source} You can speed up the drying process with a hairdryer. ^{[12]
X
Research source} Once the paint is dry, spray on a second coat; you should see the paint going on thicker now. If you'd like, you can do a partial layer instead using a different color for a tie-dye effect.
Be very careful when removing the stencil, as some of the paint might still be wet, especially towards the edges. ^{[13]
X
Research source} Unlike with fabric paint, you can let spray paint dry before removing the stencil. This is because spray paint doesn't form a thick layer that might tear—like fabric paint does.
^{[14]
X
Research source} Once the shirt is dry, you can pull the cardboard out and wear your shirt.

Community Q&A

Search

Add New Question

Question

How do I make sure the paint stays on a shirt during laundry use?

Community Answer

Make sure you use fabric paint. It would also help if you flip it inside out during the washing process. You should not put it in the dryer, and instead, lay it flat or hang to dry.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 5 Helpful 48
Question

Is fabric paint safe for skin? I'd like to do my daughter's footprints on a t-shirt for my husband.

Community Answer

Fabric paint is NOT safe for the skin. Even if fabric paints are listed as non-toxic, they contain a preservative called formaldehyde, which is condemned by dermatologists.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 15 Helpful 46
Question

Should you wash and dry the t-shirt before you paint it?

Community Answer

Yes, if you have time, it's best to prep your shirt by washing and drying. If there are any stains or fluff on it when you paint it might lead to an uneven or less long-lasting coat.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 10 Helpful 35

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Video

Tips

If you are using a negative stencil, consider using a pencil eraser dipped in paint to stamp polka dots around the stencil. ^{[15]
X
Research source}

Thanks
Helpful 0 Not Helpful 0
You can use contact paper or freezer paper to make negative stencils. ^{[16]
X
Research source}

Thanks
Helpful 0 Not Helpful 0
Cut a stamp out of a (or use a lemon cut in half). Dip it in paint, then stamp it onto your shirt. ^{[17]
X
Research source}

Thanks
Helpful 0 Not Helpful 0

Show More Tips

Submit a Tip

All tip submissions are carefully reviewed before being published

Name

Please provide your name and last initial

Submit

Thanks for submitting a tip for review!

Warnings

Painted shirts are delicate; the designs will fade over time.

Thanks
Helpful 12 Not Helpful 2