The Ultimate Step-by-Step Guide to Painting a Wall

Download Article

Prime and paint your walls better than the pros

Co-authored by Patrick Coye and Luke Smith, MFA

Last Updated: November 22, 2024 Fact Checked

Download Article

ARTICLE

VIDEO

Looking to get some new color on those walls? Or maybe it’s high time for a touch-up. In any case, you’ve got your paint and your roller and you’re ready to go, you just need to figure out where to start. Painting a wall is a breeze so long as you follow some simple (but crucial) steps, and we’re here to help you every step of the way, so lay down some tarp, open a window, and get rolling!

Painting an Interior Wall: Quick Overview

Cover the floor and any furniture with a dropcloth.
Remove light switch covers and line the edges of the wall with painter’s tape.
Use a paint brush to prime the edges of the wall.
Use a roller to work inward toward the center.
Paint in “W”-shaped strokes for even coverage.
Coat the wall with a layer of primer to conceal the old color.
Apply 2-3 coats of paint the same way.

1

Protect your floors and trim.

Download Article

Lay a tarp over the floor and tape the wall’s trim to contain the paint. Even the most meticulous painters are prone to drips and drops now and then, so remove any furniture and lay a drop cloth like a tarp, plastic sheet, or old, thick blanket on the floor beneath the wall. Then, use painter’s tape to protect any portions of the wall you don’t want to get paint on, like molding, door and window frames, or doorknobs. ^{[1]
X
Expert Source

Patrick Coye
Painting Specialist

Expert Interview. 22 July 2020.}
- Also, remove any light switch coverings or other wall-mounted accessories, like thermostats, so that you can paint the small portion of the wall beneath them.
- If you can’t remove any particular piece of furniture, go ahead and cover it with a drop cloth to protect it.

2

Clean and repair the walls.

Download Article

Wipe down the walls with a damp rag and fill in any cracks. Dampen a spare rag with warm water and wipe the entire wall to remove dust and grime so that the paint can adhere evenly. ^{[2]
X
Expert Source

Barry Zakar
Handyman

Expert Interview. 16 July 2020.} Then, use spackle to fill any cracks in the wall , or use a caulking gun to fill any gaps between the wall and windows or doors, wiping away the excess with your damp rag.
- Apply the spackle with a putty knife and let it sit for 30-60 minutes. Then, sand it down with fine-grit sandpaper to make it flush with the wall. After, wipe that area of the wall again with a damp rag to remove any spackle dust.

3

Coat the wall with primer.

Download Article

Roll primer onto the wall to help apply your paint more evenly. Fill the well of the tray with primer , but leave the slanted section exposed (you can always add more later). Use a 3–4 in (7.6–10.2 cm) angled paint brush to apply primer in corners and along the edges of the wall. Then roll a paint roller in the primer and along the ridges of the tray to prevent any dripping, and roll the primer onto the wall in vertical strokes. Overlap your stroked by about 2–3 in (5.1–7.6 cm) for the best coverage. Paint until the entire wall is coated with primer, then let it dry for 4-6 hours. ^{[3]
X
Expert Source

Patrick Coye
Painting Specialist

Expert Interview. 22 July 2020.}
- Use a thick, 0.75 in (1.9 cm)-nap roller to hold more paint and to coat textured walls, or a roller with a small, 0.25 in (0.64 cm)-nap for a more even finish on smooth walls.
- Reapply primer to the roller any time the roller seems to be running dry or is no longer applying primer to the wall.
- Primer helps conceal darker paint colors beneath the new coat, and also helps the new coat adhere to the wall. If you’re painting a lighter-colored wall, a paint-and-primer in one will usually do, and you might skip this step.

4

Pour your paint and start painting the trim.

Download Article

Mix your paint, then use a brush to “cut” the trim. Use a paint mixer attachment on a drill or a handheld stirrer to blend the paint for 1-2 minutes, which ensures the oils and pigments are combined and also breaks up clumps. Then, pour your paint into a fresh paint tray. Dip a 3–4 in (7.6–10.2 cm) angled brush into the paint and start painting at the edges of the wall, where you taped. This is known as “cutting in”—getting the tricky corners done with a brush first makes painting the rest of the wall with a roller much easier. ^{[4]
X
Research source}
- Use the brush to paint about 3–4 inches (7.6–10.2 cm) out from the edges and corners, to make rolling easier.
- Use a glossy paint for areas that need to be cleaned frequently, like kitchens or bathrooms. For living spaces, choose a more comfortable, matte or satin-finish paint, which tend to be more welcoming.
- Also, make sure you have enough paint! A single gallon is usually enough to cover about 400 square feet (37 m ² ) of wall space. Multiply the length of your wall by its height to find its dimensions.

5

Roll the paint onto the wall.

Download Article

Paint using “W”-shaped strokes to coat the wall evenly. To paint with a roller , roll the fabric or foam end in the tray to coat it, then along the ridges of the tray a couple of times to shed excess paint. Then, use gentle but even pressure to roll the paint onto the wall in 2 by 2 feet (0.61 m × 0.61 m) sections, rolling in alternating, diagonal strokes to help conceal the strokes and more evenly apply the paint, until the area is completely coated, then move on to the next. ^{[5]
X
Trustworthy Source
Consumer Reports
Nonprofit organization dedicated to consumer advocacy and product testing
Go to source} Paint systematically to make sure you cover the entire wall; start from the top and work across, then down, working your way into the center of the wall.
- Overlap each painted section by 30-40% to make sure you get total coverage.
- As with the primer, use a thick-napped roller for textured walls, or a small-napped roller for walls with smooth finishes.
- Use a long roller handle to help you reach high-up areas of the wall without needing a ladder.

6

Add 1-2 more coats.

Download Article

Let the first coat dry for 2-4 hours, then paint again. Just 1 coat usually isn’t enough for most walls. Let the first coat dry completely, then start rolling on 1-2 more coats. ^{[6]
X
Research source} Remember to cut in from the corners again with a paint brush! Paint until the wall is evenly covered, and the color itself appears uniform. Textured walls typically need more coats than smooth walls in order to get into all the nooks and crannies.
- Make sure the room is well-lit, or use a portable work light to illuminate the wall, which makes it much easier to spot patchy or uneven paint.
- If you’re taking breaks between each coat, place the rollers and brushes in the paint tray and slip the tray into a plastic bag or cover it in cling wrap to prevent it from drying out.

7

Let the paint set overnight, then clean up.

Download Article

Remove the tape and let the paint dry overnight. Before the paint is totally dry, peel up the painter’s tape—removing it when the paint is dry might result in flaking. Then, once the paint has set, come back and inspect your work. If you need to, add another coat of paint. If it looks even and you can’t see any patchiness, reinstall any light switch covers or other wall accessories, pull up the tarp, and bring the furniture back. ^{[7]
X
Research source} Then, admire a job well done!
- Wash your roller and brushes outside in a bucket of warm water and 0.5–1 c (120–240 mL) of dish soap, until no more paint comes off the bristles or nap. Then leave them to air dry overnight.
- Keep any leftover paint in the can in case you need to touch up the wall later. Also, write down the paint color in a notebook, or on a bit of painter’s tape adhered to the back of the light switch cover so you can remember it later if you need more.

Expert Q&A

Search

Add New Question

Question

How can I protect my floors when painting the walls?

Patrick Coye
Painting Specialist
Patrick Coye is the owner and operator of Patrick’s Painting & Home Improvement in Alexandria, Virginia. With over 15 years of experience in residential construction, Patrick specializes in painting, wallpaper removal/installation, drywall, staining decks and fences, and kitchen cabinetry painting. To date, Patrick and his team have painted over 2,000 houses and stained over 800 decks. Patrick's Company won a "Top Job" award from the American Painting contractor magazine in 2020.

Patrick Coye

Painting Specialist

Expert Answer

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 0 Helpful 2
Question

How do you clean a paint roller?

Patrick Coye
Painting Specialist
Patrick Coye is the owner and operator of Patrick’s Painting & Home Improvement in Alexandria, Virginia. With over 15 years of experience in residential construction, Patrick specializes in painting, wallpaper removal/installation, drywall, staining decks and fences, and kitchen cabinetry painting. To date, Patrick and his team have painted over 2,000 houses and stained over 800 decks. Patrick's Company won a "Top Job" award from the American Painting contractor magazine in 2020.

Patrick Coye

Painting Specialist

Expert Answer

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 3 Helpful 1
Question

What are common mistakes when painting the interior walls of a room?

Barry Zakar
Handyman
Barry Zakar is a professional handyman and the founder of Little Red Truck Home Services based in the San Francisco Bay Area. With over ten years of experience, Barry specializes in a variety of carpentry projects. He is skilled at constructing decks, railings, fences, gates, and various pieces of furniture. Barry also holds his MBA from John F. Kennedy University.

Barry Zakar

Handyman

Expert Answer

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 6 Helpful 11

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Video

Tips

For more exact color-matching, tint your primer by stirring in a small amount of the paint you’ll be using for your top coat.

Thanks
Helpful 1 Not Helpful 0
Between priming, painting and drying time, painting interior walls can become a lengthy task. Schedule your project for a weekend or off day so you’ll have plenty of time to work unhurried.

Thanks
Helpful 1 Not Helpful 1
Line the tray with plastic wrap beforehand if you plan to reuse it. Afterward, simply lift and toss the plastic wrap into the garbage.

Thanks
Helpful 0 Not Helpful 0

Submit a Tip

All tip submissions are carefully reviewed before being published

Name

Please provide your name and last initial

Submit

Thanks for submitting a tip for review!

Warnings

If you've exposed any live wires in your outlets or switches, take care to avoid touching them as you paint.

Thanks
Helpful 6 Not Helpful 3
Open a window or wear a respirator to prevent inhaling paint fumes, which can cause dizziness and other adverse effects.

Thanks
Helpful 0 Not Helpful 0
Keep small children and pets away from freshly-painted walls until they’ve had a chance to dry. This keeps them safe from fumes or paint ingestion, and keeps your walls safe from smudges.

Thanks
Helpful 0 Not Helpful 0

Things You'll Need

[1]

Expert Source

Patrick Coye
Painting Specialist

[2]

Barry Zakar
Handyman

[3]

[4]

[5]

Go to source

[6]

[7]

Log in

The Ultimate Step-by-Step Guide to Painting a Wall

Painting an Interior Wall: Quick Overview

Steps

Protect your floors and trim.

Clean and repair the walls.

Coat the wall with primer.

Pour your paint and start painting the trim.

Roll the paint onto the wall.

Add 1-2 more coats.

Let the paint set overnight, then clean up.

Expert Q&A

Video

Tips

Warnings

Things You'll Need

You Might Also Like

References

About This Article

Reader Success Stories

Did this article help you?

Quizzes

You Might Also Like

Featured Articles

Trending Articles

Featured Articles

Featured Articles

Watch Articles

Trending Articles

Quizzes

Explore Categories