PDF download Download Article PDF download Download Article

As technology became more accessible and less expensive, independently recording and editing your own songs and covers became a reality. Today, guitarists of all levels can produce raw recordings or create stylized masterpieces from the comfort of their own home. You don’t need fancy equipment to record and distribute your music, just a laptop, guitar, a few cables, and possibly a pre-amp.

Method 1
Method 1 of 3:

Using a Direct Audio-In Connection

PDF download Download Article
  1. It is possible to connect your guitar directly to your laptop through the device’s audio-in port. This port is typically located on the side of laptops, near the headphone-out port. You may see one of the following icons next to it: a microphone or a circle with two triangles. [1]
  2. While the average guitar cable has a ¼” phone jack on each end, the audio-in port requires a â…›” stereo plug. You may purchase a guitar cable with a ¼” phone jack on one end and a â…›” stereo plug on the other end OR you may purchase an â…›” stereo plug adapter to use with your standard guitar cable.
    • Your laptop’s audio-in port may require a stereo plug with a TS (Tip/Sleeve) connection or a TRS (Tip/Ring/Sleeve) connection. If you are unsure which tip your computer requires, consult your laptop’s manual. [2]
    • If your laptop does not have an audio-in port, you will need to purchase an interface or a special cable that plugs into your audio-out port, also known as a headphone jack. These products allow you to use your audio-out port as an audio-in port. These products are sold at a variety of price points and vary in quality. You may also use these devices with your phone and tablet.
    • If your laptop does not have a headphone jack, you can purchase an adaptor that plugs into your USB port. [3]
    Advertisement
  3. Insert the ¼” phone jack into your guitar. If you are using a â…›” stereo adapter, place it over the remaining ¼” phone jack. Insert the â…›” stereo plug into your laptop’s audio-in port. [4]
  4. You can listen to your guitar through your computer’s speakers, a set of external speakers, or a pair of headphones. If you are using external speakers or headphones, insert the speaker cable or headphones into your laptop’s audio-out port. Strum your guitar to test the signal.
    • If you are using your laptop’s internal speakers or a pair of headphones, you may notice that the signal is relatively weak. This is due to the fact that the laptop’s audio-in port are not capable of amplifying the signal. A set of external speakers, however, will act as an amplifier. [5]
    • You may also experience a significant delay, or a gap between when a sound is inputted into the computer and when you hear that sound. [6]
    • Before you can hear your instrument, you may need to download and/or open recording software.
    • If you can not hear your guitar, open your computer’s sound settings. Make sure your sound is not muted. Make sure the correct port or device is selected (audio-in, audio-out, headphone, microphone, etc.). For specific instructions, consult your computer or device’s manual. [7]
  5. Advertisement
Method 2
Method 2 of 3:

Using a Powered Audio-In Connection

PDF download Download Article
  1. If you are unsatisfied with the strength of your guitar’s signal, enhance it with a pre-amp. Pre-amplification is the first stage of amplification. These devices boost your guitar’s signal. You can purchase a pre-amp specifically designed for guitars. However, if you are looking to save money, several guitar accessories come equipped with pre-amps. These include, amp-modelers, pedals, drum machines, and direct boxes. [8]
    • The best pre-amps use tubes.
  2. Insert your standard guitar cable into your guitar. Plug the other end of the guitar cable into the input port of your pre-amp. Insert a â…›” stereo in cable into your pre-amp’s PA Out or Line-Out port. Put the opposite end of this cable into your laptop’s audio-in port. [9]
    • If your laptop does not have an audio-in port, you will need to purchase an interface or a special cable that transforms your audio-out port, also known as a headphone jack, into an audio-in port. These products also work with phones and tablets. There are also adapters that plug into USB ports. [10]
  3. If your guitar is connected properly to your laptop, you can hear the instrument through your computer’s speakers, a set of external speakers, or a pair of headphones. If you are not using your’ computer’s speakers, insert the external speaker cable or headphones into your laptop’s audio-out port. Strum your guitar to test the signal. [11]
    • While the pre-amp will improve the strength of the signal, it may not decrease any delay you are experiencing. Delay, or audio latency, is the gap that exists between when a sound is inputted into the computer and when that sound is actually heard. [12]
    • In order to hear your guitar, you may need to download and/or open recording software first.
    • If you are experiencing sound problems, open your computer’s sound settings. Check to see if your sound is muted and that the correct port or device is selected (audio-in, audio-out, headphone, microphone, etc.). For specific instructions, consult your computer or device’s manual. [13]
  4. Advertisement
Method 3
Method 3 of 3:

Using a Powered Digital-In Connection

PDF download Download Article
  1. For the best results, bypass the analog connection entirely and connect your guitar digitally to your computer. You can connect your guitar digitally to your computer through a pre-amp with a USB or Firewire outport. Before you purchase a pre-amp with one of these out ports, check to see if the guitar accessories you already own will work. These accessories may include amp-modelers, pedals, drum machines, and direct boxes. [14]
  2. Place your standard guitar cable into your guitar. Plug the opposite end of the guitar cable into the pre-amp’s input port. Insert a USB, Firewire, or Optical cable into your pre-amp’s USB or Firewire out port. Plug the other end of this cable into your laptop’s USB or Firewire in port. [15]
  3. When your guitar is properly connected, you will be able to assess the strength and quality of your guitar’s signal. Listen to the instrument through your computer’s speakers, a set of external speakers, or a pair of headphones. If you’re using external speakers or headphones, insert their respective cables into your laptop’s audio-out port. Play a few chords on your guitar to test the signal. [16]
    • This method will produce the crispest and clearest recordings. [17]
    • You may need to download and/or open recording software in order to hear your instrument.
    • If your guitar’s sound is not coming through, make sure the instrument’s volume is turned all the way up. Open your computer’s sound settings and double check that your volume is not muted and that the correct port or device is selected (audio-in, audio-out, headphone, microphone, etc.). For specific instructions, consult your computer or device’s manual. [18]
  4. Advertisement

Video

Community Q&A

Search
Add New Question
  • Question
    My laptop has a single input jack for the microphone and headphones. How would I connect my electric guitar to my laptop?
    Community Answer
    The third method (digital connection) in this article should work the best for you.
  • Question
    What is the link to the software mentioned in the article?
    Community Answer
    They are referring to recording software like Audacity. It's pretty simple and easy to understand. Another example of such software is Amplitude, a program that emulates amplifiers and effect boards/ pedals.
  • Question
    How do I do away with the latency?
    Community Answer
    By using a low latency kerneled operating systems and audio applications designed for the purpose ie: AVLinux, KXStudio, Ubuntu Studio (much better Stabilty wise now, but not sure about the old VST support whines ) with monothithic kernels and low latency apps like Jack, Ardour, "Guitarix" Virtual Amplifier, Rackarack , Burt's Cybernetic continentally joined Twin and effects processing program :) and many Drum machine.Sampler and other great software all quite professional and to all intents and purposes, free. (Read GNU licening documents). Standard operating systems draw to many resources in the desktops amongst other things so are not suitable, as even their CD players often drop out.
See more answers
Ask a Question
      Advertisement

      Tips

      • There are several recording programs to choose between. If you are a Mac user, consider using Garageband, Logic Express, and Logic Studio; if you are a Windows user, consider using Cubase Essential 5 or Cubase Studio 5. [19] You may need to download and/or open recording software in order to hear your instrument through your computer.
      • Instead of plugging your instrument into your computer to record, you can record your music with an External Digital Recorder. [20]
      • Make sure you are tuned up before recording!
      Show More Tips
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Thanks for submitting a tip for review!
      Advertisement

      Things You'll Need

      Using a Direct Audio-In Connection

      • Guitar Cable and â…›” Stereo Plug Adapter
      • Guitar Cable with a ¼” Phone Jack and a â…›” Stereo Plug
      • Headphones or a Set of External Speakers (optional)

      Using a Powered Audio-In Connection

      • Guitar Cable
      • Pre-Amp
      • â…›” Stereo Cable
      • Headphones or a Set of External Speakers (optional)

      Using a Powered Digital-In Connection

      • Guitar Cable
      • Pre-Amp with a USB or Firewire out port
      • USB, Firewire, or Optical Cord
      • Headphones or a Set of External Speakers (optional)

      About This Article

      Article Summary X

      If you want to plug a guitar into a laptop using a direct audio-in connection, purchase a cable with a 1/4-inch phone jack on one end and a 1/8-inch stereo plug on the other end. You can also purchase a 1/8-inch adapter to convert a standard guitar cable. Plug the 1/8-inch end into the audio-in port on your laptop, and the 1/4-inch end into the guitar. You can listen to your guitar through the computer’s speakers, a set of external speakers, or a pair of headphones plugged into the audio-out port. To learn how to use a powered audio-in connection, read on!

      Did this summary help you?
      Thanks to all authors for creating a page that has been read 584,233 times.

      Did this article help you?

      Advertisement