PDF download Download Article PDF download Download Article

Has your marble floor lost its shine? Marble floors add a luxurious touch to any home with beautifully-textured surfaces. However, it’s important to use the right technique to polish a marble floor by hand in order to restore shine and avoid damaging the soft, porous stone with harsh chemicals. Clean the floor first with a broom and mop, then use mild liquid soap, water, a sponge, and soft towels to polish the marble. After you’ve shined up the floor, protect and maintain it regularly to ensure its longevity and keep it looking bright and beautiful.

Method 1
Method 1 of 3:

Cleaning the Floor and Treating Stains

PDF download Download Article
  1. Sweep the floor to clean up any loose dirt and debris. Use a soft broom to sweep up all the loose dirt and debris from the marble floor into a pile. Sweep the pile into a dust pan and pour it out into a garbage can. [1]
    • Pay special attention to any corners or spaces underneath furniture where dust and dirt can accumulate. Lift up any rugs or mats and remove them temporarily so you can access the floor underneath them.
  2. Pass a damp mop over the entire marble floor using figure-eight motions to clean up any dirt that you weren’t able to sweep up. Rinse the mop in a bucket of clean water and wring it out when it becomes dirty or dries up as you work. [2]
    • If the floor is particularly dirty and the mop water becomes dirty when you rinse out the mop, pour out the bucket and refill it with fresh water to avoid reapplying dirt to the floor as you mop.

    Tip : Sweep and mop your marble floors regularly to keep them from accumulating dirt and grime that can damage the shine.

    Advertisement
  3. Mix 1 part hydrogen peroxide with 4 parts water and enough baking soda to make it into a thick paste. Cover any stains completely with the paste, then cover the paste with plastic wrap and tape the edges down. Let it sit for 24-48 hours until it is completely dry, then remove it and wipe the area clean with a damp cloth and dry it off with a clean towel. [3]
    • The poultice paste will suck out stains from the porous marble. If the stain is still visible after the treatment, repeat the process with another application of poultice.
  4. Advertisement
Method 2
Method 2 of 3:

Polishing with a Soap and Water Solution

PDF download Download Article
  1. Use an environmentally-friendly liquid dish detergent and a bucket of clean water. Squeeze 3-4 drops of the detergent into the bucket and agitate it until it starts to foam up. [4]
    • A solution of mild soap and water is all you need to polish marble floors by hand. Marble is very porous and delicate, so harsh chemical cleaners can damage it and dull its finish.

    Warning : Never use any kind of acidic detergent or chemical cleaners on a marble floor or you will end up damaging it.

  2. Dip a clean sponge into the bucket to saturate it completely. Lift it out and wring it out over the bucket until it is just damp and not dripping with soapy water. [5]
    • A regular yellow sponge is all you need to apply the solution to the marble floor. You just need to use the soft spongy part, so it doesn’t matter whether it has a green abrasive side or not.
  3. Work in small sections and apply light pressure as you move the sponge in small circular or arcing motions. Rewet the sponge as needed while you work until you have sponged the whole floor with the soap solution. [6]
    • If there are any stubborn stains that you can’t get out with the sponge, you can use a soft-bristled brush to scrub them more vigorously.
  4. Fill a bucket with clean warm water. Work in small sections and carefully pour out just enough to rinse away any soap residue. [7]
    • Don’t ever let puddles of water sit on marble floors for extended periods of time.
  5. Use a soft, clean towel, such as a microfiber cloth or chamois. Wipe up the water from the rinsed areas using circular motions. [8]
    • This will clean up any remaining soap residue and polish the marble surface.
  6. Sprinkle a small amount of marble polishing powder on top of any spots with scratches or scuffs. [9] Rub the powder into the scratches with a clean damp cloth using circular motions. Wipe the marble clean with another clean damp cloth, then dry it with a fresh cloth. [10]
    • Make sure you use a polishing powder that specifically states it is OK to use on marble. Always refer to the product's instructions for any additional suggestions to achieve the best results.
  7. Advertisement
Method 3
Method 3 of 3:

Protecting a Marble Floor to Keep it Shiny

PDF download Download Article
  1. Many types of liquids can leave permanent stains on marble floors. Act quickly whenever you spill something on the floor to wipe it up with a nonabrasive sponge or soft cloth. [11]
    • Even plain water can dull the surface of the floor if you leave it sitting. Acidic liquids like vinegar, citrus, or wine will especially damage marble if you don’t wipe them up right away.
    • Avoid using all-purpose cleaners and homemade acidic cleaning solutions, such as those that contain lemon juice or vinegar. These types of cleaners will damage the finish of the marble and leave it looking dull.
    • It’s OK to use a commercial cleaner that is specifically made for cleaning marble surfaces.
  2. A vacuum cleaner has lots of hard parts on the bottom that can scratch the soft surface of marble. Use only a soft broom and mop to perform regular cleaning. [12]
    • A soft dust broom and a sponge mop are ideal for safely cleaning your marble floors without scratching them.
  3. Put down welcome mats by doors to the outside that people come in and out of to keep some of the outdoor dirt and grime from getting tracked over the floors. Place rugs in areas where people constantly pass by, such as hallways or living areas, to help protect the surfaces from scratches. [13]
    • It’s very easy to damage the polished shine of a marble floor with abrasive dirt, so the more you protect it, the longer it will last and the less polishing it will require.

    Tip : It’s also a good idea to have people take off their shoes at the front door before walking around on top of the marble floors to avoid scratching them with dirt and debris stuck to the bottom of their shoes.

  4. Apply stick-on felt pads to the bottoms of the legs of any furniture like chairs or tables. This will protect the floor from scratches when you slide the furniture around. [14]
    • You can get stick-on felt pads at a home improvement store or online. Buy a big pad that you can cut to different sizes if you have a lot of different furniture you want to apply it to.
  5. Apply a new coat of marble sealer to the entire surface of the floor with a clean, soft rag. This will penetrate the pores of the marble to seal them and protect the floor from spills and stains. [15]
    • You can check if it is time to reseal the floor by pouring a spoonful of water onto an inconspicuous spot of the surface. If the water gets absorbed and darkens the stone in 1 minute or less, there is no sealer left on the marble and you need to apply a new coat.
  6. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    How do I restore the shine to my marble floor?
    Guy Peters
    House Cleaning Professional
    Guy Peters is the Owner of MOP STARS Cleaning Service, a complete house cleaning service for residential and commercial clients, based in Denver, Colorado. Founded in 2014, MOP STARS provides regular, move in/out, deep, and commercial cleaning services. Guy has a BA in Finance from the California State University - Sacramento and an MBA from Cornell University.
    House Cleaning Professional
    Expert Answer
    Always start with a clean surface. Polishing a floor that’s even a little dirty will not only make it impossible to finish with a great looking floor, but you could even damage the marble in some cases.
  • Question
    How do you get stains out of marble floors?
    Guy Peters
    House Cleaning Professional
    Guy Peters is the Owner of MOP STARS Cleaning Service, a complete house cleaning service for residential and commercial clients, based in Denver, Colorado. Founded in 2014, MOP STARS provides regular, move in/out, deep, and commercial cleaning services. Guy has a BA in Finance from the California State University - Sacramento and an MBA from Cornell University.
    House Cleaning Professional
    Expert Answer
    Use a commercial product specifically made for marble or make your own at home. I recommend a combination of 1 of tablespoon ammonia, ½ of cup hydrogen peroxide and enough baking soda to make a thick paste. Apply evenly and allow the mix to sit for at least 12 hours while covered by plastic wrap.
  • Question
    Can marble be cleaned with acid?
    Guy Peters
    House Cleaning Professional
    Guy Peters is the Owner of MOP STARS Cleaning Service, a complete house cleaning service for residential and commercial clients, based in Denver, Colorado. Founded in 2014, MOP STARS provides regular, move in/out, deep, and commercial cleaning services. Guy has a BA in Finance from the California State University - Sacramento and an MBA from Cornell University.
    House Cleaning Professional
    Expert Answer
    No! Marble is really sensitive to acidic cleaners, and they should be avoided at all costs.
Ask a Question
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!

      Things You’ll Need

      Cleaning the Floor and Treating Stains

      • Soft broom
      • Dust pan
      • Mop

      Polishing with a Soap and Water Solution

      • Buckets
      • Mild liquid dish detergent
      • Sponge
      • Soft towels
      • Water
      • Soft-bristled brush (optional)
      • Marble polishing powder (optional)

      About This Article

      Thanks to all authors for creating a page that has been read 49,069 times.

      Did this article help you?

      Advertisement