PDF download Download Article PDF download Download Article

Electrolysis is a great option for men and women looking to remove unwanted hair . Unlike shaving, waxing, or plucking, electrolysis is permanent and relatively painless. Start by meeting with a skilled technician for a consultation. On the day of your first appointment, don’t apply any perfumes, oils, or lotions. The technician will evaluate your needs for hair removal and will recommend a course of action. If you are a good candidate for electrolysis, it will most likely take several treatments to get rid of unwanted hair. Your technician can also give you a few aftercare tips, including staying out of the sun for a day or so. [1]

Part 1
Part 1 of 3:

Choosing a Technician

PDF download Download Article
  1. Know what you’ll pay well before you show up for your appointment. The cost will depend on several factors, including the size of the area to be treated. Many places charge by the minute and can give you a good estimate beforehand. You might even save money by scheduling multiple sessions over time. [2]
    • For example, one salon might charge $49 for a 15-minute session and $75 for a 30-minute one.
    • Weigh the pros and cons of paying more for a technician with lots of experience. For example, the upfront cost may be higher, but they might finish the job in fewer treatments.
  2. There are many options available for hair removal, including waxing, tweezing, and laser treatments. Electrolysis can be more expensive than other options, and 10-12 treatments might be necessary compared to 3-6 with laser hair removal, but it is also more permanent. [3]
    Advertisement
  3. An electrologist can remove hair from almost anywhere on the body. It helps if you have a list of ‘problem’ areas that you would like to address when you first talk with them. Hair on the jawline, sides of the face, abdomen, underarms, bikini areas, and other spots are all candidates for removal. [4]
    • Electrolysis is especially effective at getting rid of hair in hard-to-reach places, like the ears.
  4. If you have a friend or family who has had a good experience with electrolysis in the past, ask for the technician’s information. This is the best type of lead that you can get. It’s also okay to ask for previous case studies or samples done by the office where your work will be completed. [5]
  5. Technicians will often advertise or display their credentials publicly. In the United States, look for an American Electrology Association (AEA) certification. Make sure that the salon you are visiting offers “needle electrolysis” and not just a gimmick, such as hair reduction. [6]
    • Many dermatologists' and cosmetic surgeons' offices also offer electrolysis.
    • You may also be able to visit a registered nurse, nurse practitioner, or physician assistant for electrolysis.
    • Look for signs of state licensing and continuing education as well. For example, certified professional electrologists (CPE) will often post their certifications of completion. [7]
  6. As health professionals, your electrologist should follow a standard set of cleaning and sterilization practices. When you visit the office or salon, ask what they do to promote patient safety. You’ll likely hear that they wear gloves and use sterile instruments. [8]
    • This way, when you arrive on the day of the procedure you know what to expect in terms of safety. Feel free to halt the procedure at any moment if these rules aren’t followed.
  7. This is an in-office visit where you can talk with the technician and ask as many questions as you want. Your technician will likely outline the entire process for you, so that you’ll know what to expect. You may also create a treatment schedule that could span several sessions and months, depending on your goals. [9]
    • Some consultations even include a brief treatment session, so that you can see how your skin will react to the process.
    • There is nothing wrong with consulting with several technicians before making your final choice. After all, you’ll be seeing this person multiple times and it’s important that you are comfortable.
  8. Advertisement
Part 2
Part 2 of 3:

Getting Ready for Your Appointment

PDF download Download Article
  1. Some sessions might last five minutes to remove just a few stray hairs. Or, they could span over an hour for a larger section of hair. The coarseness of the hair matters as well with thicker follicles taking longer to remove. Spreading out sessions over time helps to prevent skin irritation. [10]
    • If you have a condition that causes excessive hair growth, also called hirsutism, expect your sessions to take longer.
  2. When you first enter the room you’ll usually need to sit or lie down on a treatment table. The technician will apply a disinfectant to the area. Then, they will start inserting tiny needles into each hair root. They will conclude by pulling out each hair with long tweezers and rubbing lotion over the treated area. [11]
  3. Four days prior to your appointment go ahead and shave the area to be treated, if possible. Then, let the area grow out and leave it alone until your appointment. This will let the hairs grow long enough to be pulled out successfully with a tweezer.
    • Avoid any other harsh skin treatments, such as chemical peels, in the days before your appointment. These can overburden your skin and make it react badly to electrolysis. [12]
  4. On the day of your appointment, take a shower or bath. Avoid using deodorant, antiperspirant, perfume, lotion, or oil on the treatment area. If your underarm is the focus, keep it bare. This will allow the hair follicles to stand more upright and make them easier to treat and remove.
  5. The process of zapping each hair can dehydrate your skin, so make sure to drink at least eight glasses of water on the day of your appointment. It’s also recommended to avoid any sodas, coffee, or other caffeinated drinks on the treatment day.
  6. About an hour before you head to your appointment, take the recommended dosage of your pain reliever of choice. This will help to dull the sensitivity of your skin and might make it easier for you to relax.
  7. To pass the time during treatment and to keep your mind off the zapping sensation, download some music and put in your headphones. Or, take a book or some magazines into the room with you. Some people even relax enough to take a quick nap. [13]
  8. You can anticipate feeling a small amount of discomfort, but nothing that will be too intense. Deep breathing and loosening your muscles will make you more comfortable overall. Remember that your technician can stop the process at any point if you ask.
  9. Advertisement
Part 3
Part 3 of 3:

Caring for Your Skin Afterwards

PDF download Download Article
  1. Your skin may appear slightly red or pink after treatment and that is completely normal. Treat it like you would a mild sunburn. Apply a good coating of aloe-based lotion and gel as often as you like. [14]
    • Placing a cold compress on the treated area can also help the skin to heal. Keep it on for just a few minutes of time to avoid damaging your skin.
  2. Some small scabs might show up a few days after your appointment. This is part of the healing process for your pores, so just leave them be. They will usually harden and fall off in 1-2 days.
  3. Because your skin will be extra exposed and sensitive after treatment, try to stay indoors for at least 24 hours afterwards. If you have to go out, put on a high SPF sunscreen and/or keep the treated area covered. If your skin is exposed to too much sun after treatment it can lead to splotches and hyperpigmentation.
    • The same advice goes for tanning beds. Stay away for at least one full day or until your skin feels healed.
  4. Sweating during an exercise session can cause skin irritation in areas treated by electrolysis. It can also lead to infection if the pores become clogged. Take a break from working out heavily for at least a day or two following your procedure, especially if you had hairs removed from a sweat-prone area, like your armpits. [15]
  5. Avoid wearing tight or restricting clothes after a treatment. Air circulation is important for maximum healing, especially if you received treatment on your bikini area, the back of the neck, or on your underarms.
  6. This gives your skin enough time to heal in between treatments. It also ensures ample time for any stray hairs to regrow to full length, making it possible for a technician to remove them. When in doubt about how often to schedule your appointments, talk with your technician and follow their guidance.
  7. Advertisement

Expert Q&A

Ask a Question
      Advertisement

      Tips

      • Some areas are more sensitive than others, so ask the professional performing your electrolysis what to expect.
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • In the rare event that your skin is extremely sore, heavily peeling, or emitting pus, seek treatment from your doctor.
      • Talk with your physician if you are considering electrolysis when pregnant or in an area of your body with moles. [16]
      • Ask your technician about their confidentiality policies. As a health procedure, whatever happens during your session should stay your private business. [17]
      Advertisement

      About This Article

      Article Summary X

      To prepare for your electrolysis appointment, avoid shaving or waxing for 4 days prior to your treatment so your hair is long enough to pull out. Then, on the day of your appointment, take a shower or bath, but don’t use any deodorant, perfume, or lotion, which will prevent the hair follicles from standing upright. You should also drink plenty of water since zapping each hair can dehydrate your skin. Additionally, take an over-the-counter pain reliever 1 hour before the appointment to make your skin less sensitive. For more tips from our Medical co-author, including how to care for your skin after electrolysis, keep reading!

      Did this summary help you?
      Thanks to all authors for creating a page that has been read 68,529 times.

      Did this article help you?

      Advertisement