PDF download Download Article
Top tips for cleaning and drying out pumpkins
PDF download Download Article

The best way to preserve a pumpkin will depend on what sort of pumpkin you want to preserve and why. You can preserve a carved pumpkin by keeping it sanitized and moist, but a decorative whole pumpkin needs to be dried out in order to last. If you plan on preserving a sugar pumpkin for culinary purposes, you will need to cook it and freeze it. Continue reading to learn more about each method of pumpkin preservation.

Method 1
Method 1 of 3:

Preserving a Carved Pumpkin

PDF download Download Article
  1. Mix together 1 tsp (5 mL) of bleach and 1 gallon (4 L) of water. Let the pumpkin soak in this solution for at least 1 hour. [1]
    • The water is intended to hydrate the pumpkin flesh and prevent it from drying out too quickly. The bleach is an antimicrobial agent that will kill most of the surface bacteria and mold spores on the pumpkin.
    • You can soak the pumpkin up to 8 hours, but soaking it too long can actually infuse the flesh with too much moisture, making it more prone to rot.
  2. Use a clean rag or paper towels to remove most of the moisture puddled inside the pumpkin. Dry the outside of the pumpkin, as well.
    • Leaving too much moisture puddled inside can actually cause the pumpkin to rot.
    Advertisement
  3. Combine 1 Tbsp (15 mL) of bleach with 1 quart (1 L) of water in a spray bottle. Douse the exposed flesh with this stronger bleach solution. [2]
    • The bleach used in the soaking solution was a small amount only intended to stop the growth of surface bacteria. Using too much bleach in the soaking solution can weaken the pumpkin. By spraying the pumpkin with a stronger bleach solution after soaking it, you can sanitize it further without weakening the structure of the pumpkin.
  4. Prevent puddles of moisture from sitting inside the pumpkin by inverting it onto a clean, dry rag and letting it dry completely.
    • Give the pumpkin at least 20 minutes to dry. You could let it sit up to 1 hour if desired, though.
  5. Rub all of the exposed flesh with a fine coating of petroleum jelly.
    • The petroleum jelly will lock in moisture, preventing the pumpkin from dehydrating as quickly as it might do otherwise. It will also block out new bacteria and mold.
    • Do not use petroleum jelly without first using bleach. The bleach is needed in order to kill bacteria and mold already on the pumpkin. If you skip this step and go straight to the petroleum jelly, you will actually trap preexisting bacteria and mold on the surface of the pumpkin, thereby speeding the decay process.
    • Vegetable oil or a vegetable oil spray could also be used instead of petroleum jelly.
  6. If you got excess petroleum jelly on the non-carved portions of the pumpkin, wipe it away with a clean rag or paper towel.
    • Note that this is more for the sake of appearance rather than necessity.
  7. Display your pumpkin in a spot that does not receive direct sunlight. A shaded area works best. [3]
    • Heat will speed the decay process and placing it in a dry area will cause the flesh to dehydrate.
    • When not in use, consider storing the pumpkin in a refrigerator or draping a damp towel over it.
  8. Advertisement
Method 2
Method 2 of 3:

Preserving a Decorative Whole Pumpkin

PDF download Download Article
  1. The best option is a freshly harvested pumpkin with at least 2 inches (5 cm) of stem.
    • A long stem is important because it helps wick away moisture from the pumpkin. A pumpkin with no stem or a very short stem is more likely to retain moisture.
  2. Combine 1 to 2 Tbsp (15 to 30 mL) of mild dish detergent with 1 gallon (4 L) warm water in a large bucket. Wash the pumpkin in this solution to remove surface bacteria.
    • Use a mild liquid dish soap instead of a harsh cleanser. Harsh cleansers can be too abrasive.
    • Rinse the soapy solution off the pumpkin once finished.
  3. Use a clean rag or clean paper towels to dry the pumpkin completely.
    • This preservation method aims to dry the pumpkin out rather than keeping it moist. As such, you should manually remove as much of the moisture as possible by wiping it away.
  4. Pour a little rubbing alcohol into a spray bottle and mist the surface of the pumpkin, coating it completely without drenching it. [4]
    • You could also spray the pumpkin with a household cleaner.
    • Rubbing alcohol and household cleaners are both used to protect the surface from new bacteria and mold spores.
    • Do not drench the pumpkin. Too much rubbing alcohol can be abrasive and might cause damage to the pumpkin. Too much could also cause moisture to build.
  5. Place the pumpkin on several layers of newspaper in a dark, warm, dry area. Let it dry out for several weeks until the pumpkin feels notably lighter.
    • Make sure that the area you choose has good ventilation. Otherwise, the air can become stagnant, causing moisture to build up as a result. Moisture can cause the pumpkin to rot.
    • Warmth speeds up the drying process and darkness preserves the color. You could also place the pumpkins beneath an electric fan to speed the drying process further.
    • Change the newspaper every few days. As it absorbs the moisture of the pumpkin, it will become damp. This dampness can cause your pumpkin to rot if it is not removed.
    • In addition to feeling lighter, you should also be able to hear seeds rattling around inside the pumpkin when you pick it up.
  6. After the pumpkin has dried out completely, apply a coat of paste wax over the surface to seal it and protect it against bacteria.
    • Clear shellac can also be used instead of paste wax.
  7. Advertisement
Method 3
Method 3 of 3:

Preserving a Cooking Pumpkin

PDF download Download Article
  1. The pumpkin should be a deep orange color on the outside, and its flesh should have a fine texture. [5]
    • Avoid using pumpkins with stringy or dry flesh.
    • A pumpkin of higher quality will last longer and better than one of low quality.
    • This method preserves the pumpkin by freezing it. Freezing is the easiest way to preserve pumpkins and is also thought to produce the best quality product. [6]
  2. Watermark wikiHow to Preserve a Pumpkin
    Rinse the pumpkin under lukewarm running water.
    • If necessary, gently scrub the pumpkin with a vegetable brush to remove dirt and debris from the surface.
    • Soap is not necessary, nor is it advised.
  3. Watermark wikiHow to Preserve a Pumpkin
    Use a large serrated knife to cut the pumpkin in half. Then, cut each half into 2- to 3-inch (5- to 7.6-cm) chunks. [7]
    • A serrated knife is recommended. A smooth blade is more likely to slip against the tough skin of the pumpkin, which could cause you to accidentally cut yourself.
    • You could peel the pumpkin chunks before boiling them, but waiting until after the pumpkin has been cooked will be easier.
  4. Watermark wikiHow to Preserve a Pumpkin
    Place the pumpkin chunks in a medium saucepan and cover them with water. Boil the pumpkin for about 25 to 30 minutes, or until the flesh feels tender.
    • You could also bake the pumpkin. Cut the pumpkin in half and place each half, face-down, in a baking dish. Cover with foil and cook in an oven preheated to 375 degrees Fahrenheit (190 degrees Celsius) for 1.5 hours.
  5. Watermark wikiHow to Preserve a Pumpkin
    Let the cooked pumpkin cool enough for you to handle it. Scrape the pulp from rind and transfer it to a medium bowl.
    • Use a metal spoon or similarly rigid utensil to dig out the flesh.
    • Once cooked, the flesh should separate from the skin with relative ease.
  6. Watermark wikiHow to Preserve a Pumpkin
    Use a potato masher to mash the already soft pulp into a puree.
    • You could also accomplish this task with a hand-held immersion blender or a food processor.
  7. Watermark wikiHow to Preserve a Pumpkin
    Place the bowl or pan containing the pumpkin in cold water until the pumpkin puree cools to room temperature.
    • Do not allow excess water to get into the mashed pumpkin.
    • Stir the mashed pumpkin occasionally as it cools.
  8. Watermark wikiHow to Preserve a Pumpkin
    Use containers made from non-reactive materials like plastic or glass. Make sure that the containers are approved for freezer use.
    • Leave at least 1 inch (2.5 cm) of empty headspace in between the top of the pumpkin and the top of container. This will allow the pumpkin to expand as it freezes.
    • Tightly seal the containers before freezing them.
  9. Watermark wikiHow to Preserve a Pumpkin
    Freeze the pumpkin until ready to use. The pumpkin should last about 3 to 6 months without developing any change in flavor or texture. At best, you may even be able to keep the pumpkin for over a year. [8]
  10. Advertisement

Community Q&A

Search
Add New Question
  • Question
    Can I preserve a small, white pumpkin forever?
    Community Answer
    Not forever, but you could preserve it for a long time using these methods. Buying a plastic pumpkin would be ideal if you wanted one to keep forever.
  • Question
    Can I eat a pumpkin after it has been preserved in bleach?
    Community Answer
    No, do not eat pumpkin that has been preserved in bleach.
  • Question
    Can I put the carved pumpkin in the refrigerator?
    Community Answer
    No, because if you do that the carved pumpkin would become soggy from the inside to the outside. It'll fall in on itself in a few days!
See more answers
Ask a Question
      Advertisement

      Tips

      • You could also use a commercial pumpkin preservative on carved pumpkins. Look for one labeled as a fungicidal solution and spray the pumpkin each day with the preservative to prolong the life of the pumpkin.
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Thanks for submitting a tip for review!
      Advertisement

      Things You'll Need

      Method One: Preserving a Carved Pumpkin

      • Bleach
      • Water
      • Large bucket
      • Spray bottle
      • Clean rags or paper towels
      • Petroleum jelly or vegetable oil
      • Damp towel
      • Refrigerator

      Method Two: Preserving a Decorative Whole Pumpkin

      • Mild liquid dish soap
      • Water
      • Bucket
      • Clean rags or paper towels
      • Spray bottle
      • Rubbing alcohol or household cleaner
      • Newspaper
      • Electric fan
      • Paste wax or clear shellac

      Method Three: Preserving a Cooking Pumpkin

      • Vegetable brush
      • Serrated knife
      • Medium to large saucepan
      • Water
      • Baking pan and aluminum foil (optional)
      • Metal spoon
      • Potato masher, food processor, or immersion blender
      • Rigid, freezer-safe container

      About This Article

      Article Summary X

      To preserve a pumpkin, start by washing the surface of the pumpkin with mild dish soap and warm water to remove any bacteria. Then, dry the pumpkin completely with a rag before spraying it with rubbing alcohol so it's completely covered but not drenched. After you spray the pumpkin, put it on some newspaper in a warm, dry area and let it dry out for several weeks, changing out the newspaper every few days so it's not too moist. Finally, after the pumpkin has dried out, cover it with a coat of paste wax or clear shellac to protect it from bacteria. To learn how to preserve a carved pumpkin, keep reading!

      Did this summary help you?
      Thanks to all authors for creating a page that has been read 246,345 times.

      Reader Success Stories

      • Sheri-Lou Healy

        Nov 5, 2017

        "Pumpkin preservation process and cleaning the pumpkin properly were most helpful to me! Thanks."
      Share your story

      Did this article help you?

      Advertisement