Q&A for How to Make a Paper Crossbow

Choose a paper that is thick, but still easy to work with, such as construction paper or card stock.

It depends on how big your crossbow is. If you have a bigger crossbow use 3, but if you have downsized it, then you could use one or two.

Look for problems with the construction. If you can't fix them, start over from the beginning.

There is no designated person who answers the questions posted here. The questions are answered by users of the site like yourself, if they happen to read the question, know the answer, and want to submit the answer. So there is no guarantee that a given question will get answered, and if it does, it could take a while.

No, you can just hold the rubber band by hand, but the pin is useful. The pin also makes the shot more accurate.

Yes, but make sure you use it in the same length. See if you can use the tape provided in the guide first, and if not, give the duct tape a shot.

Make the shoulder pad very accurate and tight so it is easy for it to stand up.

No, it doesn't have to be lined up.

Pull the drawstring back and hook it into the clip. Then, feed the pencil/projectile into the crossbow through the tube at the top of the crossbow and let it rest at the bottom on the clip.

At a right angle. Position it at the center. Make sure it's not wobbly, or it will fire in the wrong direction.

Only if you aren't firing it at a living person, as it could cause serious harm.

Yes, as long as it is the size of printer paper you can use lined paper, although it might not look as good.