Q&A for How to Take Apart a Kindle Fire

Try using a different charger. If that doesn't work, contact Amazon. They are usually very good about standing behind their products and should be able to offer you a solution.

It's possible that you have been overheating your Kindle Fire during the charging process, so monitor it closely next time you charge it to ensure that it's not getting too hot.

Get someone to fix it for you.

There are two layers of framed glass on any tablet screen that is touch capable. The first, outer layer is called a digitizer - this allows you to use your fingers or a stylus pen to navigate and provide human interfacing with. The second layer is the tablet's graphics screen (LCD). If the broken part is the LCD screen, then the tablet needs a costly repair to replace it. If the digitizer is the one that is broken, then it also needs to be replaced, but it's not so expensive. Most of the time, digitizers get damaged first, then the LCD screen below it. You may want to decide if the cost of repair or buying a new tablet makes more sense to you.

The part number of a USB/power port is provided by the manufacturer of the component. Each manufacturer of a USB port component on a circuit board will always have a different number. It is better to know what type of USB port a circuit board is using, because different manufacturers use different types of USBs.

If you are sure that the port is broken, then consider how you can open the case of the device. Some devices are very hard to open, and in trying you may make things worse by damaging the touch screen. Some manufacturers use adhesive to seal their cases for anti-tampering reasons. If you manage to open it, and if the port has come off/loose of its pads, you need to have skill in soldering SMD (surface mount device) type components, and a temperature controlled soldering iron is helpful. You will also need to find/research the pin connectors arrangement of the port and know where to place the tip of your soldering iron. If the port is seated firmly on pads, then your problem is something else.

assess the broken piece and determine if there is enough of it to be pulled out using needle nose pliers or tweezers. If the broken piece is really lodged in the hole, you may have to open the device to get a better access and management to your advantage, or just contact Amazon and send it to them.

Download the latest update from Amazon’s site on a computer, transfer it via USB to the Kindle’s root directory, and restart the device. For a manual reset, charge it for 30 minutes, hold the power button for 40 seconds, or try holding Volume Down + Power to access the recovery menu and select Factory Reset. If this doesn’t work, contact Amazon support.

Test the charger and cable with another device. Check the port for debris, and clean it gently. Try angling the cable to see if it charges temporarily. If the port is damaged, replace it by opening the tablet and soldering in a new one, or take it to a repair shop. Contact Amazon if it’s under warranty.

If your Kindle Fire won’t turn on or charge and you can’t open the back, test the charger and cable with another device. Check the charging port for debris and clean it gently. Hold the power button for 40–60 seconds to force a restart, then charge it for an hour. If it still doesn’t work, take it to a repair shop to avoid damaging the device. Contact Amazon Support if it’s under warranty.

Check for debris and clean it gently with a toothpick or compressed air. If the port is damaged, contact Amazon Support if it's under warranty. For DIY repair, order a replacement port, open the device, and replace the port using soldering tools. If unsure, take it to a repair shop for professional help.

Fire tablets do not have a dedicated reset button, but you can perform a reset using the power button. To force a restart, press and hold the power button for at least 20-30 seconds until the screen turns off and the tablet reboots. If this doesn't work, let the battery drain completely, then charge it and try turning it on again. If the issue persists, contact Amazon support for further assistance.

Turn off your Kindle. Gently use a toothpick, plastic tool, or fine tweezers to remove the paper. Use compressed air to clear fragments. Be gentle to avoid damage. If it doesn’t come out, visit a repair shop for help.

If your Kindle Fire 8 is stuck on the Fire screen, charge it for an hour, then hold the power button for 60 seconds to restart it. If that fails, try recovery mode by holding Volume Up and Power until the recovery menu appears. Select "Reboot System Now" or "Factory Reset." If it remains stuck, connect it to a PC to reset with Amazon tools or contact Amazon support for help. It may need repair or replacement.

If your Fire tablet shows a moisture detection alert but is dry, restart the device to see if the error clears. Clean the charging port gently with a dry toothbrush or compressed air to remove any dust or residue that might trigger the sensor. Leave the device off for a few hours in a dry area to ensure no residual moisture. Update your device software if possible, as it might be a bug. If the issue continues, the sensor could be faulty, and contacting Amazon support or a technician may be necessary.

If your Fire Tablet's power button isn’t working, it’s likely a separate component connected to the motherboard. It may just need the button or its flex cable replaced, which is a relatively simple repair for a technician. If the issue is deeper, like damage to the motherboard, repairs could be more expensive. Take the tablet to a repair shop for an evaluation to confirm if it’s a quick fix or something more complex.

For the Kindle Fire 7 (12th generation, 2022), opening the device can be tricky due to its tightly sealed design. Use a plastic pry tool or guitar pick to avoid scratching the casing. Start at the seam near the charging port, as it may have a slight gap, and work the tool gently along the edges to release the clips. Avoid metal tools to prevent damage. If the seam is too tight, check a teardown guide for this model or seek professional help.

Order a new battery, they range around 10 to 30 dollars. If you happen to have another Kindle that has a good battery, but a bad screen, you can take that battery and put it in instead.

Try plugging the device in. Your Kindle Fire may just be a bit low on battery.

If your Amazon tablet won’t turn on, charge it for 30 minutes using a working charger. Press and hold the power button for 40 seconds to restart it. Check for damage or a loose charging port, and try a different charger. If it still won’t turn on, contact Amazon support for help or a replacement.