If you forget to dry your towels after washing them, they may develop a pungent mildew smell that will make them incredibly unpleasant to use. Thankfully, you can combat this foul odor at home using some clever cleaning techniques.
Things You Should Know
- Put the towels in the washing machine. Add a cup of vinegar and start a hot water cycle. Pause the machine mid-cycle and soak the towels for 1 hour.
- Run a second hot water cycle, this time adding another cup of vinegar and your usual laundry detergent.
- For super stinky towels, try pre-soaking them in a bucket of hot water and oxygen bleach for 48 hours before washing them.
Steps
-
Wash the towels. Place your smelly towels in the washing machine and start the wash cycle using the hottest water setting available. Add in about one cup of white vinegar. [1] X Research source
- For now, leave out detergent or fabric softener.
-
Soak the towels in the machine. Stop the machine after everything is well mixed. Then, allow the towels to soak in the vinegar solution for about one hour. After the hour is up, turn the machine back on and allow the cycle to complete.Advertisement
-
Add vinegar and detergent. Next, you will need to run the wash cycle again, but this time add another cup of vinegar and your usual laundry detergent. Use the same amount that you would usually use for a load and allow the cycle to run through as usual, except with an extra spin cycle.
- You can either select “extra spin cycle” if your machine has this feature or restart the spin cycle after the first one finishes.
-
Put the towels into the dryer immediately. As soon as the second spin cycle finishes, put the towels into the dryer. Turn your dryer on the highest setting and run it until the towels are completely dry. Then, run the towels through the dryer for a second time.
-
Add 2/3 of a cup of Oxiclean to a large bucket. If washing your towels with vinegar and baking soda does not work, then you can also try soaking your towels in Oxiclean and hot water. To get started, add 2/3 of a cup of Oxiclean to a large bucket.
- Wear gloves to protect your hands as well.
-
Pour in some hot water. Start adding very hot water to the bucket. If the water from your tap is not very hot, then you can add some boiling water to the bucket. Swish the Oxiclean into the water by gentle tilting the bucket back and forth as you add the water. Just be careful not to tip the bucket or slosh the water over the sides.
-
Start adding towels to the bucket. After you have filled the bucket about halfway with hot water, start adding your towels to the bucket. Make sure that each of the towels is fully immersed in the water.
- Leave the towels in the bucket and let them soak for about 48 hours.
-
Wash the towels in your washing machine. After you have finished soaking the towels, take them out of the tub and wring them out. Then put them right into the washing machine and run them on the hottest setting with detergent and fabric softener.
- You can also add Oxiclean to the washing machine when you wash your towels. [2] X Research source
-
Dry the towels. After the wash cycle has finished, put the towels into the dryer right away. Dry them on high heat until they are completely dry. Your towels should be like new after this treatment.
- If your towels still smell like mildew after this treatment, then you may need to replace them.
-
Check your washing machine for defects. If your washing machine is not draining all the way after the cycle finishes, then this may be causing the mildew smell. Check your washing machine for defects to see if water is pooling somewhere. If so, then you may need to hire a professional to fix your machine or you may need to replace it.
-
Wash the gasket. If your towels smell like mildew, sometimes the washing machine could be a part of the problem. Since the gasket is the rubber seal inside the washer that prevents water from leaking out when a load is washing, cleaning the gasket is very important to eliminating mildew smells coming from the washer. Wipe down the gasket with a rag dunked in soapy water, or sprayed with a mild mildew cleanser. You could also use a cleaning solution of 50% water 50% bleach.
- Consider using an old toothbrush to get hard to reach places of the gasket.
- Make sure to get all areas of the gasket. You may need to pull back sections of the gasket to get into small rubber folds. [3] X Research source
-
Clean the detergent dispensers. Take out the detergent dispensers from the machine and scrub them with a soapy water mixture consisting of a small amount of dishwashing soap, and water. Leftover soap residue or stagnant water on the detergent dispensers can make this area of your wash machine smell bad too.
- If the dispensers cannot be removed from the machine, do your best to clean inside the dispensers with a rag or pipe cleaners. [4] X Research source
-
Run a cleaning cycle . Make sure that your washing machine is empty and then run a wash cycle using the longest, hottest temperature setting. If the mildew smell remains, try running another cycle. It might take a few cycles to remove the mildew smell. [5] X Research source Consider adding one of the following straight into the washing basin of the machine: [6] X Research source
- 1 cup of bleach.
- 1 cup of baking soda.
- 1/2 cup of powdered enzymatic dishwasher detergent
- 1/2 cup of a commercial washer cleaner
- 1 cup of vinegar
-
Seek professional care. If none of these methods help with getting rid of the mildew smell, you may need to call a professional to come look at your washing machine. There may be mold growth behind the drum of the machine, or perhaps a blocked drain or filter. [7] X Research source
- A certified repair professional can assist you with diagnosing what is wrong with your machine, and may be able to dismantle the machine to find the source of the smell if need be.
-
Take preventative measures. Once you figure out if where the mildew smell is coming from, take some preventative measures to ensure that mold doesn't accumulate again. You might want to consider:
- Airing out the washing machine . Leave the washing machine door open between washing uses. However, be aware that pets and young children could become trapped in the machine. [8] X Research source
- Using detergent wisely . Use detergents that create a small amount of suds, and are specifically made for highly efficient machines. Powder detergents usually tend to be less sudsy than liquid detergents. Also, don't exceed the recommended amount of detergent. Sometimes, even less detergent works better for cleaning your clothes. [9] X Research source
- Avoiding fabric softener . Fabric softeners that come in liquid form tend to leave a residue that supports mold growth. Instead of using liquid fabric softener, consider using dryer sheets or dryer balls to give your clothes a softer feel. [10] X Research source
- Drying the gasket . Use a rag to wipe everywhere surround the gasket, and inside the grooves of the rubber gasket. Ideally, you should try to wipe the gasket after every washing cycle. If you’re not going to wipe and clean the gasket after every wash, you should try to regularly wipe the gasket every week or so to remove trapped mold. [11] X Research source
- Doing a bleach cycle . Run a hot water and bleach cycle once a month. This is a good opportunity to disinfect your washer, but also to wash heavily soiled items like work cloths and grimy towels. [12] X Research source
Expert Q&A
-
QuestionWhat removes mildew from fabric?Dario Ragnolo is the Owner and Founder of Tidy Town Cleaning, a home cleaning service in Los Angeles, California. His business specializes in residential & commercial cleaning. He is a second generation home cleaning expert, who grew up around his parents cleaning business in Italy.To remove mildew from fabric, you can use a solution of laundry detergent and hot water. Apply the solution to the area affected with mildew, and use a toothbrush to brush it off.
-
QuestionWhat can I do if the towels smell fine after the laundry but start smelling bad when we use them to dry after showering?Community AnswerWash with vinegar and then a round with baking soda -- it helps for a bit. Only use the towels for a few days before replacing again and ensure that they dry completely between uses. If all else fails, you could bleach them -- they will fade but they won't smell bad. After washing, always ensure that the towels dry completely or they will smell. If hanging outside, ensure that they are hung out early and brought in before the day's chill sets in again. A whirl in the dryer after being outside in cold air will help if needed.
-
QuestionOur very old thin towels remain fresh and dry us well. However the newer thick fluffy weaves become stiff after one use. Why?Community AnswerI wonder if your new towels might be holding extra detergent? This might be the case if you dry your towels in a dryer, rather than on the line: you might not notice them holding the extra detergent after they are dryer fluffed, but the re-wetting gets the detergent moving to the surface of the weave.
Video
Tips
- Avoid getting towels moldy by hanging your towels to dry right after you have used them. Consider adding additional racks if you don't have plenty of room for the towels of each family member.Thanks
- If you live in a place with sunshine, dry your towels on a clothesline in the sun.Thanks
- Use a laundry detergent with an antifungal or bleach additive. This helps fight the mildew smell and can help prevent mildew from forming.Thanks
Warnings
- Do not use bleach and ammonia in the same load, as these combine to form chlorine gas which is poisonous and can be fatal.Thanks
- Overuse of bleach, vinegar, and other harsh cleaning products can cause seals and/or gaskets in washing machines to leak. Also, use of harsh chemicals can void the washer warranty.Thanks
References
- ↑ https://lifehacker.com/use-vinegar-to-remove-mildew-smell-from-towels-321115
- ↑ http://www.realsimple.com/magazine-more/inside-magazine/ask-real-simple/how-to-keep-towels-smelling-fresh
- ↑ http://www.todayshomeowner.com/how-to-remove-mold-and-mildew-from-front-load-washing-machines/
- ↑ http://www.todayshomeowner.com/how-to-remove-mold-and-mildew-from-front-load-washing-machines/
- ↑ http://www.todayshomeowner.com/how-to-remove-mold-and-mildew-from-front-load-washing-machines/
- ↑ http://www.todayshomeowner.com/how-to-remove-mold-and-mildew-from-front-load-washing-machines/
- ↑ http://www.todayshomeowner.com/how-to-remove-mold-and-mildew-from-front-load-washing-machines/
- ↑ http://www.todayshomeowner.com/how-to-remove-mold-and-mildew-from-front-load-washing-machines/
- ↑ http://www.todayshomeowner.com/how-to-remove-mold-and-mildew-from-front-load-washing-machines/
About This Article
If your towels smell like mildew, put them in a washing machine with 1 cup of white vinegar and wash them on the hottest setting available. During the cleaning cycle, turn the washing machine off and let your towels soak for 1 hour, then turn the machine back on. When the cleaning cycle finishes, wash your towels 1 more time with white vinegar and laundry detergent. Once they’re done washing, dry your towels in a dryer to prevent more mildew buildup. To learn how to remove mildew smell using Oxiclean, read on!
Reader Success Stories
- "I had been plagued by a smell in our dark towels, wash rags, and hand towels for some time. After having tried everything that I felt was safe for our laundry, I still had "that" smell. A friend told me about using a formula with vinegar and baking soda. I searched for it on the Internet, which led me to your site. It worked, I am delighted to say. Thank you. " ..." more