PDF download Download Article PDF download Download Article

Mildew is a foul-smelling, annoying (and, in rare cases, dangerous) type of fungus that can grow on fabric and many other parts of your home. [1] Mildew loves to grow in wet places without proper ventilation. While the best policy is to prevent mildew in the first place by keeping your clothes, upholstery, and carpet clean and dry, once it's already set in, it's usually possible to remove it with a few easy steps!

Method 1
Method 1 of 4:

Washing Towels, Clothing, and Linens

PDF download Download Article
  1. This method of removing mildew from fabric uses a borax soak to pre-treat your laundry before washing it. To start, make a mixture of borax and water with a ratio of about 1 cup (204 grams) of borax per 1 quart (1 liter) of water, then add more borax and water if needed. Use a clean bucket or tub to hold your mixture.
    • Borax is a cheap, readily available laundry additive. You can find it in more grocery stores alongside the other laundry detergents.
    • If you can't find any borax, use an ordinary detergent or non-chlorine bleach that's safe for your fabric.
    • In general, hot water cleans stains (including mildew) better than cold water, making it a good, default choice for laundry. However, not all fabrics may be safe for hot water cleaning. If your fabric can't be washed in hot water, allow the mixture to cool first. Don't mix borax into cold water; it will most likely clump up.
  2. Use a stick or spoon to agitate the fabric. Make sure all of—not just the mildewed portion—gets a chance to absorb the solution.
    • If your fabric won't stay under the solution, you can weigh it down with a jar.
    Advertisement
  3. Once your fabric has had a chance to soak, remove it from the solution and gently squeeze it over a sink or drain to remove the excess water. Next, apply a small dot of normal detergent to the mildew stain and use a soft-bristled brush (such as an old toothbrush) to scrub the stain away.
    • It's a good idea to scrub the stain from the opposite side of the fabric when possible. Doing this can work the stain away from the fabric, rather than driving the stain further into it. It also reduces the appearance of wear-and-tear on the article.
    EXPERT TIP

    Dario Ragnolo

    House Cleaning Professional
    Dario Ragnolo is the Owner and Founder of Tidy Town Cleaning, a home cleaning service in Los Angeles, California. His business specializes in residential & commercial cleaning. He is a second generation home cleaning expert, who grew up around his parents cleaning business in Italy.
    Dario Ragnolo
    House Cleaning Professional

    Our Expert Agrees : Mixing hot water and laundry detergent is a very easy way to clean up mildew. If you have to clean a large area, you can even try pouring the mixture over the affected fabric area and then let it sit for a few minutes before scrubbing the mildew away with a toothbrush.

  4. Your fabric is now pre-treated and ready for the wash. In general, hot water and a long, high-powered wash will be most effective at cleaning your fabric. However, these conditions can damage some fabrics, so obey all instructions on your item's care label.
    • Unless your item is seriously soiled, you can safely do an entire load of laundry at this point without fear of harming the other clothes, so don't be afraid to toss in similar fabrics with your soiled item.
    • For whites, you may add bleach to the wash. For colored fabrics, use only colorfast bleaches or similar detergents that won't cause them to bleed.
  5. When your wash is done, hang the clothes up on a clothesline to dry. Don't put them into a dryer, as heat will set in the stains—including mildew. [2] Once the clothes are dry, inspect them; if you notice any mildew, repeat the cleaning process.
    • Try to dry your clothes in the sun. This will help further kill any mildew.
    • If you must use a clothes dryer, use the no-heat setting.
  6. Advertisement
Method 2
Method 2 of 4:

Cleaning Upholstery

PDF download Download Article
  1. This method for treating upholstery uses the cleaning power of rubbing alcohol to eliminate mildew colonies that have taken root in your furniture. To begin, first use a vacuum cleaner to remove as much of the mildew as possible. Most vacuums should come with a hose or similar attachment which should make it easy to remove mildew even in tough-to-reach cracks.
    • If possible, move the furniture to an outdoor area with good ventilation before beginning to reduce the danger of inhaling mildew spores.
    • It might be a good idea to wear a dust mask for this step, so as to avoid breathing in any microscopic mildew spores.
  2. Next, mix 1 cup (240 milliliters) of rubbing alcohol with 1 cup (240 milliliters) of hot water. Soak a sponge in this solution. Wring most of the liquid out of the sponge, then gently rub the solution into the affected area of the upholstery. Avoid using too much moisture. hen you're done, the fabric should be damp, but not soaking.
    • Note that rubbing alcohol can damage some fabrics. To make sure your upholstery can stand the rubbing alcohol used in this method, try dabbing a little of your solution in a hard-to-see spot on your upholstery, then letting it sit for 15 minutes. If you observe any discoloration or damage, use one of the alternate cleaning solutions in this article (like the borax soak above or the home-made remedies below.)
  3. When you've thoroughly applied your water/alcohol mixture to the mildew-affected spots on your furniture, give it a chance to do its work by leaving your upholstery alone for about 30 minutes (or longer). Over time, the alcohol will gradually soak into the fabric and kill the mildew colony.
  4. Dampen a sponge or rag with clean water and dab it onto the affected area to partially rinse the alcohol solution away. Next, use a dry paper towel to blot up as much moisture as possible. If the mildew appears to be completely removed, allow your furniture to dry. If not, you may need to re-apply your cleaning solution and repeat the cycle.
    • If possible, dry your upholstered item outside in the sun. If not, open a window and/or use a fan to circulate the air in the room. Good ventilation is important while the furniture dries—without it, it's more likely for mildew to re-appear.
    • If there is a lot of moisture in the fabric, you can try using a wet-dry vacuum cleaner to soak up the excess moisture.
    • Blot in circular motions. [3]
  5. Unfortunately, not all mildew is treatable. If the mildew in your upholstery is so bad that it's made its way deep into the padding or has left a permanent stain, it may be impossible to get your furniture back to normal. In this case, you may need to throw the affected furniture away to keep your home's air free of dangerous mildew spores. While professional cleaning services are also an option, these are seldom cheap.
  6. Advertisement
Method 3
Method 3 of 4:

Treating Carpets and Rugs

PDF download Download Article
  1. To start treating a mildew-infected carpet or rug, remove as much of the mold from between the tightly-packed fibers as possible by sweeping or beating the carpet with a broom. Make sure to wear a dust mask and, if possible, perform this task outside away from children and pets; inhaling mildew can be hazardous to your health.
    • For a deeper clean, you can also use a hand brush rather than a broom. Carpets and rugs are typically tougher than the fabrics listed above, so you can get away with using slightly stiffer bristles, but your should still take care not to scrub too hard or you may damage the carpet fibers.
  2. Next, use a vacuum cleaner to suck up all of the of the mold you've just dislodged in the last step. Any standard hose attachment should work, but for extra cleaning power, you may want to use a vacuum head with mechanical rollers or brushes.
    • It's a good idea to empty your vacuum after using it to treat mildew. If you don't, mildew spores can be blown into the air the next time you vacuum. [4] To reduce the health dangers of inhalation, empty your vacuum outdoors in a well-ventilated area.
  3. Soak a sponge or a small rag in a mixture of soap and warm water. Wring the soap or rag out, then dab at the formerly mildew-y spot to let the cleaning solution soak in somewhat. Don't scrub or grind the sponge or rag into the carpet, as this can force mildew spores deep into the fibers.
    • Avoid using excess water. If you soak your carpet, you'll be creating the sort of moist conditions that led to the growth of the mildew in the first place. Your goal here is to gently clean the carpet fibers, not give them a bath.
  4. After you apply soap and water, to remove any excess moisture, give the affected section of carpet another quick vacuuming. It will probably be impossible to remove all of the moisture, but the more water you're able to suck out of the carpet before you leave it to dry, the better.
  5. Mildew, like many molds, thrives in dank, dark, wet conditions. By removing these conditions, you can make it less likely for mildew to set in. For example, if you have a dehumidifier, running it after you apply your soapy water can help decrease the ambient moisture in the air while the carpet dries. The less moisture in the air, the less likely mildew will be able to survive in the long run.
    • Dehumidifiers can be expensive. The best time to buy them is towards the end of summer or fall, when they are the cheapest. Remember to take advantage of sales and coupons as well.
    • If you live in a dry place, you can open up some windows. If you live in a humid place, keep the windows closed and turn on a fan. This won't decrease the ambient moisture, but it will give the carpet much-needed ventilation.
  6. If you're having a hard time removing mildew from your carpet with conventional methods, it may be necessary to take drastic measures and remove the carpet itself for a professional cleaning or disposal. For wall-to-wall carpeting, this may require special tools like a pry bar and/or carpet knife. See our article on taking out carpet for detailed instructions for this task. In most cases, you will want to wear a dust mask for safety.
    • For rugs, on the other hand, you should be able to roll up the rug and hang it outside in a well-ventilated area without much difficulty. Here, you can give the rug a deep cleaning without fear of encouraging further mold growth.
    • Be sure to check any padding under the carpet for the presence of mold. Dispose of any padding with signs of mold growth—leaving it can encourage mildew growth on future carpets that are laid over it. [5]
  7. Even once you remove troublesome mildew from your carpet, its dank odor may remain. There are a number of ways to deal with this. The simplest is to buy a bottle of carpet shampoo and follow the manufacturer's instructions for use. Usually, you'll need to scrub the shampoo into the carpet, let it sit, and then vacuum it up, though this isn't always the case.
    • An alternative homemade solution is to put a little white vinegar in a spray bottle, spritz the affected area, wait 10 minutes for it to set, then sprinkle baking soda on top and vacuum when the solution is done reacting. See below for more information on this home remedy. [6]
    • If you just want to use vinegar without baking soda, try a one part vinegar, three parts warm water solution. [7]
  8. Advertisement
Method 4
Method 4 of 4:

Using Home-Made Solutions

PDF download Download Article
  1. Though the methods above should work well for most cases of mildew, there are a wide range of alternative home remedies that may also work well. For instance, lemon juice, which is sometimes used as a natural fabric cleaner, can be paired with ordinary salt to make an effective yet gentle abrasive cleaner. Follow the simple steps below:
    • Mix 1/3 cup (80 milliliters) of undiluted lemon juice with enough salt to form a loose paste.
    • Pour or scoop your lemon/salt paste onto the affected fabric.
    • Scrub gently with a soft-bristled brush.
    • Wash and dry your fabric in the laundry machine or use a vacuum to remove excess paste and air-dry.
  2. With dealing with white fabrics, you have more cleaning options available to you than with colored fabrics because you don't have to worry about causing your fabric's dye to bleed or fade. For a natural bleach solution that's great for removing old mildew stains from white fabrics, try using hydrogen peroxide (which should be very cheap at most grocery and department stores) with the following steps:
    • Use a cotton swab or a clean rag to dab hydrogen peroxide directly onto the stain.
    • Allow the hydrogen peroxide to set for 15 minutes.
    • Wash as normal. For extra stain-fighting power, add about 1/3 to 2/3 cup (80 to 160 milliliters) of hydrogen peroxide to your laundry in addition to your normal detergents.
  3. As noted above, vinegar can be a potent natural cleaning agent and odor-fighter. However, if you use this method, it's important to remember only to use white vinegar, apple cider vinegar, balsamic vinegar, and so on are colored liquids that can cause stains. Use the steps below to treat your fabric with vinegar:
    • Make a half-and-half mixture of vinegar and warm water in a small bowl.
    • Dab this mixture into the affected fabric with a clean rag or add it to a spray bottle and spray it onto the fabric.
    • Let the vinegar set for 10 minutes, then generously apply baking soda to the wet spot to neutralize the vinegar.
    • For clothing, wash and dry as normal. For upholstery and carpet, vacuum and allow to dry.
  4. If you're lucky enough to enjoy clear, sunny days where you live, you have an opportunity to remove pesky mildew stains from your fabric with minimal effort. The simple act of drying your fabrics in the sun (rather than in a mechanical dryer) after washing has been proven to have a noticeable lightening effect on stains. Use a drying rack or a hanging wire for best results.
    • Use caution with colored fabrics, however; leaving them in the sun for long periods of time can cause their dye to fade.
  5. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    How do you get rid of mildew?
    Safir Ali
    Professional Dry Cleaner
    Safir Ali is the Co-Founder and CEO of Hamper Dry Cleaning and Laundry, a startup in Houston, Texas reinventing the laundry industry. With over six years of experience launching and operating Hamper, Safir specializes in innovative ways to simplify dry cleaning using the experience from his family's business. Safir holds a Bachelor’s degree in Business Administration and Management from Texas A&M University. Hamper offers 24/7 on-demand dry cleaning and laundry through delivery and kiosk services. Hamper has been featured on the Houston Rockets, Station Houston, the Houston Business Journal, BBVA, Yahoo Finance, and Innovation Map.
    Professional Dry Cleaner
    Expert Answer
    Mildew is a tough one! Place a towel on a tabletop and place your garment on top. Depending on the material and color, I wouldn't necessarily recommend trying to fix this at home as you might damage your garment. However, if you feel good moving ahead, dip a second towel in a one part vinegar, three parts warm water solution and blot away the mildew in circular motions.
  • Question
    How do I get mildew out of clothes?
    Community Answer
    Soak the clothes in white vinegar. (If the clothes cannot be bleached, do not leave them soaking overnight.) Additionally, add vinegar to every wash in your washing machine bleach and softener tanks. Vinegar will take out mildew, odors and will leave your clothes feeling soft.
  • Question
    What do I do if I don't have any access to borax?
    Community Answer
    Depending upon the fabric, use mild soap, with no moisturizing ingredients added, such as aloe, shea butter, coca butter etc. Use a baby toothbrush to gently scrub. If you can, put the fabric in the washing machine with vinegar, and wash on gentle cycle in the hottest water allowed for the fabric. You may have to repeat. If the item cannot be washed - chair or sofa - blot, or rent a rug cleaning machine. Regardless of method or product used, always test a small spot for colorfastness in an area that will not be noticed. Use the hottest water it can take first.
See more answers
Ask a Question
      Advertisement

      Tips

      Show More Tips
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • If you are allergic to molds and mildew, wear a face mask when cleaning mildew to prevent breathing them in.
      • Borax is poisonous if ingested; keep stored well away from children and pets and do not let them go near the stain solution while it is soaking, etc.
      Advertisement

      Things You'll Need

      Washing Towels, Clothing, and Linens

      • Borax
      • Warm or hot water
      • Bucket or tub
      • Spoon
      • Old toothbrush
      • Laundry detergent
      • Washing machine
      • Bleach (optional)
      • Jar (optional)
      • Clothesline

      Cleaning Upholstery

      • Dust mask
      • Vacuum cleaner
      • Rubbing alcohol
      • Hot water
      • Mixing bowl
      • Sponge
      • Paper towels
      • Wet-dry vacuum (optional)

      Treating Carpets and Rugs

      • Dust mask
      • Broom or hand brush
      • Vacuum cleaner
      • Rag
      • Soapy water
      • Dehumidifier or fan (recommended)
      • Carpet shampoo or vinegar water (optional)


      References

      1. http://www.fema.gov/pdf/rebuild/recover/fema_mold_brochure_english.pdf
      2. Safir Ali. Professional Dry Cleaner. Expert Interview. 15 September 2020.
      3. Safir Ali. Professional Dry Cleaner. Expert Interview. 15 September 2020.
      4. http://www.goodhousekeeping.com/home/cleaning-organizing/prevent-mildew
      5. http://www.nachi.org/carpet-mold.htm
      6. http://spotremoval.coit.com/how-to-get-mildew-smell-from-carpet
      7. Safir Ali. Professional Dry Cleaner. Expert Interview. 15 September 2020.

      About This Article

      Article Summary X

      To remove mildew from fabrics, mix lemon juice and salt to make a loose paste. Apply the mixture to the affected fabric, scrub gently, and then wash and dry your fabric as usual. If you’re working with a white fabric, dab hydrogen peroxide onto the stain, allow it to set for 15 minutes, and then wash as normal. For a stain and odor fighting solution, mix vinegar and water and then spray it onto your fabric. After 10 minutes, apply baking soda to the wet area to neutralize the vinegar and wash as usual. For more tips on how to get mildew out of carpets and upholstery, keep reading!

      Did this summary help you?
      Thanks to all authors for creating a page that has been read 464,023 times.

      Reader Success Stories

      • Tracey Lee

        Jul 5, 2017

        "I have a very old white handmade blanket that I had stored, forgotten for 8 years in a badly moist basement. On ..." more
        Rated this article:
      Share your story

      Did this article help you?

      Advertisement