Printer ink may bond to the paper fibers or soak deep into the paper, making it much more difficult to remove than pen ink. However, as long as you do not expect bright white paper, there are several methods you can try. Before you begin, check the label on your printer or ink cartridges to tell whether you are using an inkjet or laserjet printer. If you do not have access to the printer, try the inkjet methods first, then move on to the laserjet methods if you haven't removed the ink.
Steps
-
Dab fresh ink with a cotton ball. Inkjet (or "bubble jet") printers spray droplets of ink onto the paper, and depending on the type of ink used and the printer, this ink may remain wet for several minutes. Immediately after printing, you may be able to pick up a small portion of the ink using a cotton ball. This can make the next step easier, even if the ink is still mostly visible on the paper.
- Do not rub the paper vigorously, as it may rip.
- Most home and office inkjet printers use aqueous inks, typically the cheapest option, which take a few minutes to dry unless the printer includes a heating mechanism.
-
Scrape the paper gently with sandpaper or a razor blade. Sometimes, the ink will remain mostly on the surface of the paper. Scrape the top level of paper off using a razor blade or ultra-fine grit sandpaper. Scrape gently in one direction only, towards yourself.
- This has a greater chance of success if you try this immediately after printing. Thicker paper will also help, as it can withstand additional scraping.
- UV-cured inks, which tend to be more expensive and durable, are quickly bonded to the paper before they have a chance to soak in. They may be easier to scrape off than other types of printer ink.
Advertisement -
Use whiteout. If the above methods do not work, you may have to give up on removing the ink. Apply whiteout instead and allow it to dry before writing or drawing over it.
-
Apply acetone with a cotton ball to smudge the ink. Laser printers fuse the ink (technically "toner") to the paper fibers before the paper is ejected, so the ink is already dry and bonded by the time you see it. [1] X Research source Acetone, also sold as fingernail polish remover, can be applied with a cotton ball to dissolve some of the ink into a liquid again. This is not a perfect method, but may be the only one easily available. The paper will end up grey and smudged, but new printing or writing should be clearly visible on top of the smudge.
- Keep acetone away from heat sources, as it is flammable. If you feel dizzy from fume inhalation, move to fresh air. If you get acetone on your skin, eyes, or mouth, immediately rinse with lukewarm water for 15 minutes, without pausing to remove contact lenses. [2] X Research source
-
Rub the acetone in once with tissue paper. Rubbing the acetone over the ink greatly increases the amount of ink removed, although about 1/3 of the ink will probably remain as a grey smudge and faint image. Rub tissue paper only once across the affected area, since additional rubbing may tear the paper and does not noticeably increase the amount of ink removed. [3] X Research source
-
Put the acetone-soaked paper in an ultrasonic cleaning machine (optional). Ultrasonic devices use high-frequency sound waves to agitate contaminants and break them off of surfaces. This can be used to remove even more of the ink smudge, although the paper will still not appear as new. However, while these machines are sold for household use, they range from $150 at the cheapest, to several thousand dollars for higher-capacity, stronger versions.
-
Look up the latest news on laser "unprinters. " These devices uses short pulses of laser light to burn off laser-printed inks, but as of September 2014, they only exist as theory or prototypes. This may change, however, so search online for news about "unprinters" or about the company "Reduse."
- These devices will not work on inkjet-printed paper.
-
Use whiteout. If none of the above methods work, try using whiteout instead. This will leave a visible raised, white surface on the paper, but once dry it will allow you to write or draw over it.
Community Q&A
-
QuestionWhere can I buy acetone?Community AnswerYou can find acetone in most stores if you look in the cosmetics section; just look for nail polish remover.
-
QuestionHow do I remove printer ink on plastic components?Community AnswerNail polish remover or rubbing alcohol should do the trick. If not, use a magic eraser and some Clorox.
-
QuestionHow do I remove micro printed ink?Community AnswerUse white-out, or use white tape If you have some.
Video
Tips
- If you are not sure whether your printer is inkjet or laserjet, look at the label on your ink cartridge, or search for the name of your printer online to find a description. Unfortunately, paper printed with an inkjet printer and paper printed with a laserjet are difficult to tell apart.Thanks
Warnings
- Some of these treatments may affect the appearance of colored paper.Thanks
- Some other substances besides acetone can dissolve laserjet toner, or be mixed with acetone to whiten the grey smudge that results. However, some of these substances are too dangerous for home use, and are not typically available outside of chemistry labs. If you or an expert acquaintance has access to a chemistry lab, a mix of 40% chloroform and 60% dimethyl sulfoxide may be most effective. [4] X Research sourceThanks
References
About This Article
The best way to remove printer ink from paper will depend on whether you have an ink jet or laser jet printer. For ink jet stains, dab the ink with a cotton ball to soak up as much as you can. Then, gently scrape the page with sandpaper or a razor blade to remove the rest of the ink. For laser jet stains, soak a cotton ball in acetone or nail polish remover and dab the ink. Then, rub tissue paper once across the stain to remove more ink. Don’t keep rubbing it, since this can tear your paper. If your paper’s still stained from an ink jet or laser jet printer, use whiteout to cover the stain so you can write over it. For more tips, including how to use an ultrasonic cleaning machine to remove ink stains, read on!