Download Article
Download Article
There are many reasons why you might find yourself with unwanted stickers on your guitar. Luckily, there are several ways to remove unwanted stickers and sticker residue from a guitar. By using commercial adhesive products, homemade adhesive solutions, or other chemicals, your guitar should be sticker free in no time.
Steps
-
Try acetone nail polish remover, lighter fluid, shoe polish, or camping fuel. There are many chemicals that can be used to remove stickers from a guitar. One of the most effective chemicals to use is naphtha, which can be found in lighter fluid, shoe polish, and fuel for camping gear.
- Use caution when working with naphtha as it is very flammable. Do not use it near an open flame.
- You could also use acetone, commonly known as nail polish remover, in place of naphtha.
-
Use commercial adhesive removers. There are several different cleaners, such as Goo Gone or Goof Off, that are manufactured specifically for removing adhesives. These products are designed to remove sticky adhesive without damaging the finish of the material. Both products are safe to use on wood and plastic.Advertisement
-
Mix coconut oil with baking soda. Create a homemade solution using coconut oil and baking soda. Combine two parts coconut oil with one part baking soda in a small bowl. Although it may seem strange to use an oil to remove a sticker, you are creating a solution similar to Goo Gone or other commercial adhesive removers. [1] X Research source
- A homemade solution will be free of many harmful chemicals that are found in commercial adhesive removers.
- You can add a few drops of sweet orange essential oil for extra degreasing power and a more pleasant scent.
Advertisement
-
Test the adhesive remover. Before you apply generous amounts of adhesive remover to your guitar, pick a small section on the back of your guitar to test the solution. You want to be sure that it doesn’t tarnish the finish of your guitar.
-
Remove as much of the sticker as possible using your fingernail. If you are removing a larger sticker, using a larger scraping instrument, such as a CD, may be more effective than your fingernail. Removing some of the sticker will allow your adhesive remover to better reach the sticky adhesive on the back of the sticker.
- Paper stickers will allow an adhesive remove to penetrate the paper surface.
- Plastic stickers will repel the adhesive remover and not allow it to reach the sticky adhesive surface on the back of the sticker. It is important to try to remove as much of a plastic sticker as possible before applying an adhesive remover.
- Be careful to not lift any of the guitar’s finish while attempting to remove the sticker.
-
Apply the adhesive remover. Wrap a cloth or paper towel around your finger and dip it into your adhesive remover. Rub the solution on the sticker in a circular motion. Coat the entire sticker with a liberal amount of the solution. [2] X Research source
- If you are using a spray bottle of adhesive remover, spray the cloth or paper towel instead of the guitar. This will prevent you from getting remover in parts of the guitar where you do not want the remover.
-
Finish removing the sticker. Using your fingernail or the CD, continue to remove the sticker from the guitar. Start working to peel back the sticker from one corner. The adhesive remover should have softened the grip of the adhesive, allowing you to remove the sticker with little residue leftover.
Advertisement
-
Remove any residual residue. Once the sticker is removed, used the adhesive remover to remove any leftover residue. Use care to not scrub too hard and tarnish the surface of the guitar.
-
Wipe off the solution residue. Some of the adhesive solutions listed above can list a film or residue on your guitar. Dampen a clean cloth with some water and wipe off the surface of your guitar.
-
Dry off your guitar. Using a clean cloth or a clean portion of your adhesive remover cloth, dry off your guitar’s surface. If you notice any remaining adhesive, repeat the steps to remove it. Be sure to completely dry off your guitar to avoid tarnishing the surface.
Advertisement
Community Q&A
Search
-
QuestionWhat CD should I use?Community AnswerIt doesn't matter, but since this could damage the CD, make sure it's not one you care about.
-
QuestionHow do I remove the glue residue?Community AnswerTry using a damp cloth. If this doesn't work, try using guitar polish and a clean rag to remove it.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
- Test the solutions on a small portion of the guitar before applying to a large area.Thanks
- Try multiple adhesive removers to find the best option for the sticker on your guitar.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Thanks for submitting a tip for review!
Advertisement
Warnings
- Some adhesive remover solutions could tarnish the surface of your guitar. Always read the advice on the label of anything that you apply to the surface of your guitar.Thanks
- Some of the adhesive removers listed above are flammable. Do not use these products near an open flame.Thanks
Advertisement
Things You'll Need
- A guitar with stickers
- Adhesive remover
- A rag or paper towel
- CD (optional)
References
About This Article
Thanks to all authors for creating a page that has been read 75,790 times.
Reader Success Stories
- "First of all, I was floored to discover that there was an actual article dedicated to this rather shameful situation. I followed the very kind instructions, and voila! The Martin is almost virginal again!" ..." more
Advertisement
"First of all, I was floored to discover that there was an actual article dedicated to this rather shameful situation. I followed the very kind instructions, and voila! The Martin is almost virginal again!"
..."
more
