PDF download Download Article PDF download Download Article

Removing wallpaper can be a long process, but it isn't impossible! Be prepared to spend an entire weekend working on your project, and don't stress if it takes longer than you anticipated. Make sure to prep the room before you begin working so that your belongings and baseboards don't get any water damage. Depending on what kind of wallpaper you're dealing with, like strippable versus waterproof, you may need to spend a little more time removing the wallpaper. Once that is gone, you need to clean away the glue or paste that's underneath. After that, you're free to prep your walls to start on your next project!

Part 1
Part 1 of 4:

Preparing the Room

PDF download Download Article
  1. As wallpaper comes away from the walls, it can release a lot of dust and grime; clear out the room ahead of time to save yourself from having to clean off paintings, pictures, decor, and furniture later on. [1]
    • If there is furniture that is too heavy to move, cover it completely with plastic sheeting or a drop cloth.
  2. Lighting fixtures, switch plate covers, electrical outlet covers, grates, vents, and anything else attached to the wall needs to come off. Use a screwdriver and place all the screws and hardware into a resealable plastic bag so you don't lose anything. [2]
    • Sometimes the areas underneath fixtures are the best places to start peeling away wallpaper.
    Advertisement
  3. Use painter's tape to secure plastic sheeting to the top of the baseboards around the room you'll be working in. Lay another sheet of plastic over the floor so that none of it is exposed. [3]
    • Water will run down when it's sprayed onto the walls, and you don't want to risk any water damage.
    • You could use a drop cloth over the body of the floor but opt for plastic around the baseboards.
  4. You don't want to risk any water getting into an electrical outlet and causing a problem. Plug in spotlights to outlets in other rooms and use extension cords so you can have them in your work area. [4]
    • To turn off the electric, locate the electrical panel (this is often in a basement or closet). Shut off the individual breaker that powers the room you're in. You may need to test several breakers to find the right one if they aren't marked.
  5. Advertisement
Part 2
Part 2 of 4:

Peeling, Spraying, and Scraping the Wallpaper

PDF download Download Article
  1. In some cases, you can simply strip away wallpaper without having to use any other products. Use a putty knife to loosen an edge of the wallpaper. If it starts to peel away easily and doesn't leave a backing behind, you're working with strippable wallpaper. If it does leave behind a backing or if it won't budge, you'll need to use water to assist you in the removal process. [5]
    • Some very stubborn wallpapers may even need to be steamed away. But, try using hot water first before you rent a steamer.
  2. If you need to, use a putty knife to get the wallpaper up away from the wall, but try your best to not dig into the plaster or drywall. Remove as much of the wallpaper as you can by hand to reveal any backing that is present. [6]
    • Removing the top layer of wallpaper first and exposing the backing makes it a lot easier for the backing to absorb the water. In theory, this should make the removal process much faster.
  3. Every once in awhile, you might encounter wallpaper that is adhered to the wall and won't peel away from the backing. When this happens, use a scoring tool to poke lots of little holes in its surface to make it easier for the water to saturate the paper. Simply run the tool over the wallpaper while applying light pressure. [7] [8]
    • This step is most helpful for waterproof wallpapers or ones that are glossy or made of vinyl. Remember, if you were able to peel away the top layer of wallpaper, you don't need to worry about scoring the backing on its own.
    • Scorers quickly poke hundreds of tiny little holes into the wallpaper. You can buy them at all home improvement stores or online for $10 or less.
  4. Whether you use a spray bottle or a bowl is up to you. The spray bottle allows you to cover a greater area more quickly, but soaking a sponge in the bowl of hot water lets you saturate the backing more completely. [9]
    • The hotter the water, the more effective it'll be at removing the wallpaper.

    Tip: Some people swear by the vinegar and water method to remove wallpaper. Try mixing a 1:1 ratio of hot water and white vinegar and spraying that on the to-be-removed wallpaper and backing.

  5. [10] It's okay if there are still sections of wallpaper left that you couldn't peel away. Just spray those areas, too. You can tell the material is soft when you can scrape it away with a fingernail or putty knife. [11]
    • If you're working with plaster walls, don't worry about how much water you're applying—it can take a lot of liquid! But if you're working with drywall , try to only use as much water as you need—saturation for more than 15 minutes can cause permanent damage.
  6. Hold the knife at a 45-degree angle, and keep the blade flat against the wall to prevent gouging the wall. Take your time and rewet the wall as you go to help the process move along. [12]
    • You could also use a metal spatula to the same effect. The more flexible the instrument, the less likely it'll be to mark up the wall.
    • If you discover a second layer of wallpaper underneath the first, focus on removing the top layer completely before thinking about the second layer. That bottom layer will come up much more easily if the first layer is completely gone.
  7. Any little bit of wallpaper or backing that is left will show up underneath a fresh coat of paint or a new layer of wallpaper. Plus, you need to clear it all away so you can clean up the glue that's underneath. [13]
    • It's totally okay to take a break and step away from your project when you need to. Nothing is going to get damaged in the middle of this kind of process since you aren't using any kind of chemical product.
  8. Advertisement
Part 3
Part 3 of 4:

Cleaning Away Wallpaper Glue

PDF download Download Article
  1. [14] Underneath the wallpaper and backing, you will see a sticky layer of glue that was originally used to put up the wallpaper. You must remove the glue completely, otherwise, it can dry and crackle underneath fresh paint, causing it to bubble and peel. Continue spraying the glue with hot water and scraping it with the putty knife. [15]
    • Wallpaper “glue” and wallpaper “paste” are the same thing.

    Tip: If the wall feels sticky to the touch even after the wallpaper and backing has been removed, that means there is still paste on the walls.

  2. [16] Sometimes water and sheer force aren't enough for you to remove the glue. In those cases, invest in a bottle of gel stripper. Spray it over the glue and let it sit for 15-20 minutes. [17]
    • You can buy gel stripper at any home improvement store or online. It costs about $10-$15 a bottle.
  3. [18] After the 15-20 minutes have passed, use your putty knife to scrape away the glue. Repeat this process as many times as you need until all the glue is gone. [19]
    • It can sometimes help to wipe off your putty knife with a damp towel in between scraping.
  4. After the glue has been completely scraped away, dip a sponge into a bowl of clean, warm water and squeeze it out so it's damp but not dripping wet. Wipe down the walls from top to bottom and let them air-dry. [20]
    • Use this as an opportunity to spot check the walls for any spots you missed. If you come across a sticky section, take a minute to clean it.
  5. Advertisement
Part 4
Part 4 of 4:

Repairing and Prepping the Walls

PDF download Download Article
  1. Instead of jumping straight into the next part of the project, take a well-deserved break. After the 12 hours have passed, take a fresh look at the walls to see if there are any spots of glue, backing, or wallpaper that you missed. [21]
  2. Patch nicks and gouges so there are no uneven surfaces on the wall. Put a small amount of spackling paste onto the edge of a putty knife and work the paste into the hole in the wall. Add enough paste so that the hole is filled, and then flatten the edge of the putty knife against the wall and swipe it over the hole at a 45-degree angle. [22]
    • You can buy a container of spackling paste for about $5 from home improvement stores or online.

    Warning: Always read the directions on the spackling paste before you use it. Most products operate in the same way, but the drying time might be a little different depending on what brand you purchased.

  3. Sand the patched areas so the wall is perfectly smooth. Opt for 100- or 120-grit sandpaper. Once the spackling paste is completely dry, lightly sand the patched area. This will even out any sections that were partially raised and will give the patched section a smooth finish. [23]
    • You don't need to apply a lot of pressure when you sand the paste. Just rub the sandpaper back and forth over the section several times until it feels smooth to the touch.
  4. Apply primer to get the walls ready for new paint or fresh wallpaper . Use acrylic primer if you plan on applying new wallpaper (it'll make it easier to remove in the future). Use paint primer if you plan on painting the walls. [24]
    • Even if the wall is painted underneath of the wallpaper you just removed, you should still prime it again before doing anything new.
  5. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    What is the easiest way to remove wallpaper?
    Katherine Tlapa
    Interior Designer
    Katherine Tlapa is an interior designer, currently working as a Design Specialist for Modsy, a design service based in San Francisco. She also runs her own DIY Home Design blog, My Eclectic Grace. She received her BFA in Interior Architecture from Ohio University in 2016.
    Interior Designer
    Expert Answer
    The best way to remove wallpaper is to spray it with soapy water and let it sit for a while. You have to let the glue dissolve in order to scrape it off.
  • Question
    Why should I use unscented fabric softener?
    Community Answer
    Unscented fabric softener is dye and perfume free, plus if you have a MCS or EMF sensitivity it would be in your best interest to use the unscented fabric softener.
  • Question
    Do I have to skim coat the wall after removing the wallpaper?
    Community Answer
    It depends on the wallpaper. Some wallpaper will come off in one layer, leaving a paper layer with adhesive but no wall damage, therefore no need to skim coat. In this case, simply soak with a store-bought solution that softens it enough to come off by hand without damaging the wall or texture. Then make sure all of the adhesive comes off, washed the wall well to remove all of the remover and painted with no issues. However, some wallpaper won't come off easily so it may need to be removed one square inch at a time and in this case, it may damage the wall and texture. When this occurs, you will have to skim coat the wall and texture it.
See more answers
Ask a Question
      Advertisement

      Tips

      • If you have to use a steamer to remove wallpaper, rent one rather than buying one. [25] Steam one section of the wall at a time and enlist someone to help you with the task, otherwise you risk accidentally burning yourself while trying to steam and remove the paper at the same time.
      • You could try using a dye-free and scent-free liquid fabric softener mixed with water to remove wallpaper. Use a 2:1 ratio of water to fabric softener, and apply it the same way you would plain water. Some say the fabric softener helps the wallpaper come away more easily.
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Thanks for submitting a tip for review!
      Advertisement

      Things You'll Need

      • Screwdriver
      • Plastic bag
      • Painter's tape
      • Plastic sheeting 
      • Drop cloths (optional)
      • Spotlights
      • Extension cords
      • Putty knife
      • Stepstool
      • Scoring tool (optional)
      • Spray bottle
      • Bowl
      • Sponges
      • Gel stripper
      • Towel
      • Spackling paste
      • Sandpaper
      • Paint primer or acrylic primer
      • Paintbrushes

      About This Article

      Article Summary X

      To remove wallpaper, start by mixing 4 parts hot water and 1 part white vinegar in a large bucket. Then, soak a paint roller in the mixture and use it to apply the mixture to a section of the wallpaper. Once the section of wallpaper is completely saturated, let it sit for several minutes before using a putty knife to scrape the wallpaper off. Repeat with the rest of the wallpaper and then wipe down the walls with hot, soapy water. To learn how to remove wallpaper using steam, scroll down!

      Did this summary help you?
      Thanks to all authors for creating a page that has been read 1,636,019 times.

      Reader Success Stories

      • Colin Walker

        Jul 28, 2017

        "These directions were clear and concise. The illustrations were useful because I was able to confirm that we have ..." more
        Rated this article:
      Share your story

      Did this article help you?

      Advertisement