How to Repair a Sliding Window

PDF download Download Article
PDF download Download Article

We know it’s the worst when you want to let in some fresh air and it takes all your strength to open your window. If you’re having trouble with a window that’s difficult to move or won’t stay open on its own, don’t worry since there are a lot of simple fixes you can do at home. Most times, your window probably has built-up dirt that’s causing it to stick, but you may need to replace some small components if they’re still causing you some trouble. We’ll walk you through some of the most common problems you might be experiencing and how you can fix them with just a few tools. When you’re finished, your window should be working just like new!

Note: If you need to replace a window pane, check out our guide here . For a full window replacement, you can use this guide .

Method 1
Method 1 of 4:

Track and Roller Cleaning

PDF download Download Article
  1. The sliding sash is the part of your window that moves when you open and close it. Unlock your window and slide the sash open as far as you can. Hold onto both sides of the window firmly and lift it up so it comes off of the track. Tilt the bottom of the sash toward you and carefully pull the top of the window out from the frame. Set it down on a sturdy work surface. [1] Window Repair Technician Michael Fox recommends you "measure and weigh the sash, so you can get the length and weight for that window" and order the correct replacement parts.
    • If you can’t hold onto the window on your own, ask someone to help you lift and carry it.
    • Be careful not to drop the sash, or else you could accidentally break the glass and need to replace it completely.
    • Some sliding windows might have release buttons at the top of the sliding portion. When you open the window, press the buttons down and tilt the window toward you.
    • When you’re removing a vertical window , first remove the sash stops and pry open the removal clips. Then open your window up to the top of the frame to pull it out. [2]
  2. The track is the long plastic or metal piece along the bottom of the window frame that the sliding sash rolls on. Grab onto the raised rail on the track with your fingers and gently pull it toward you to pop it out of place. [3]
    • Pry the track up with a putty knife if you aren’t able to pop it out by hand.
    • You will not be able to remove the bottom or side tracks if your window opens vertically.
    • If you have an aluminum or metal track, you may need to unscrew it or you might not be able to remove it at all. That’s okay since you’ll still be able to clean it.
    Advertisement
  3. Use the hose attachment on your vacuum so it’s easier to reach your window. Suck up any dirt that was on or under the track since it could cause the window to grind or scrape when you try sliding it. Try to pick up as much debris as you can with your vacuum. [4]
    • You can also use a handheld vacuum if it’s more convenient for you.
    • Try using the brush attachment to help loosen dirt that’s really stuck on the frame or track.
    • When you’re cleaning a window that opens vertically, vacuum the side tracks from the top to the bottom.
  4. Put a squirt of dish soap onto a paper towel or non-abrasive cleaning cloth and get it damp. Wipe the bottom of the window frame and tracks on the sides to get any dirt that you missed with your vacuum. Then clean off the track piece you removed so it doesn’t have any residue left on the surface. [5]
    • If you want a more powerful cleaning solution, sprinkle baking soda on the track and spray it with white vinegar. Let it sit for 5–10 minutes before wiping it off. [6]
  5. If your window opens vertically, there might be some debris getting caught in the tracks along the side of the window frame. Press a paper towel into the track at the top of the window frame and wipe down toward the bottom. Then use a fresh paper towel on the opposite side of the window to clean out the residue. [7]
    • If you still notice buildup, spray the track again with some white vinegar and baking powder.
    • You can also try breaking apart gunk in corners with a butter knife wrapped in a clean rag.
  6. Dirt and gunk can get trapped on the rollers and make it difficult for your window to open and close. Turn the sliding sash upside-down so you can see the sets of rollers on the bottom. Point the lubricant nozzle directly at the rollers and give each one a short burst. [8]
    • Wipe any excess lubricant off the rollers with a paper towel.
    • Windows that open vertically won’t have rollers.
  7. Line the track back up with the bottom of the window frame and push it down until it snaps back into place. Position the top of the sash back into the frame and push it up. Move the bottom of the sliding piece back into the frame and set it down on the track. Try moving the window back and forth to see if it moves smoothly. [9]
    • If your window still doesn't slide easily, then you might still have some problems with the track or rollers.
    8. Advertisement
Method 2
Method 2 of 4:

Horizontal Track Repairs

PDF download Download Article
  1. Unlock your window and slide it open as much as you can. Grab onto the sides of the sash and lift it off of the track. Guide the bottom out of the frame so you can easily slide the top out. Set the sash aside while you’re working so it doesn’t get damaged. [10]
    • Some windows have a guard block on top that prevents you from lifting the window out when it’s closed. If you have trouble lifting it out, try opening it further past the block and it should come out easily. [11]
  2. If the track was incorrectly installed, it might be raised in some areas and brush against your window as you try to open it. Apply firm pressure along the entire length of the track so it clicks into place. [12]
    • This only works on plastic or acrylic tracks.
    • If you aren’t able to push the track in by hand, set a narrow piece of wood on top of it. Then tap on the wood with a hammer to force the track into the frame. [13]
  3. When an aluminum track gets bent or warped, you can try to shape it back into place. Take a straight, narrow piece of wood and position it just behind the track. Press the straight edge of the wood tightly against the metal that bows in toward the middle of the track. Lightly tap on the metal track until it’s straight against the side of the wood. [14]
    • Avoid hitting the track without a piece of wood as support, or else your window sash could fall out from the frame.
  4. If there’s unfixable damage to your track, you may need to replace it entirely. Measure the length of the old track so you know the length you need for the new one. Make sure you buy a track that’s the same brand and model for your window. Position the new track inside of the frame and press it into place to secure it. [15]
    • If you’re replacing a metal track, you can install the new rail over the first one. Just apply a thin line of caulk in the rail’s opening and press it over the old track.
    • You may be able to buy replacement tracks or rails from a home improvement store. If you aren’t able to find them on your own, you may need to call a professional window repair service.
    5. Advertisement
Method 3
Method 3 of 4:

Horizontal Roller Removal and Installation

PDF download Download Article
  1. If you’ve cleaned the rollers and they still don’t operate smoothly, you may need to replace them. [16] Open your window as far as you can, or else you won’t be able to lift it out of the frame. Hold onto the sides and carefully lift it off of the track. Tilt the bottom of the sash toward your body and guide the top out of the frame. Bring it over to your work area so you can access the rollers on the bottom. [17] [18]
    • Be very careful when you’re transporting the sash since you break the window pane.
  2. Turn the sliding sash upside down so you see the sets of rollers running along the bottom. Look for a screw holding the assembly in place and use a Phillips head screwdriver to remove it. If you don’t see a screw, then you can simply pry the wheels out of the assembly using a flathead screwdriver. [19]
    • There are usually 2 roller assemblies that each have 2 rollers, but they may vary depending on the size and brand of your window.
  3. Check the brand listed on your window and write it down so you know which rollers to get. Bring the old rollers or assemblies with you when you buy the new ones to ensure they’re the same style. Buy enough replacement rollers or assemblies to fit in your window. [20] [21]
    • You can buy roller replacements online or from home improvement stores.
  4. If you removed the entire assemblies, slide the new ones into the slots and use the same screws to reattach them. If you only popped out the rollers, then simply push them back into the slots on the old assemblies. [22]
    • If your assembly has multiple slots to install the rollers, use the same slots you removed the old rollers from.
  5. Flip the sliding sash right-side-up and guide the top back into the channel at the top of the window frame. Lift the window up and position the bottom on the track. Try rolling the sash back and forth over the track to see if it runs smoothly. If it works, then you’re finished with your repairs! [23]
    • If your window still doesn’t open or close, call a professional service to find the problem with your window.
    6. Advertisement
Method 4
Method 4 of 4:

Vertical Balance Adjustments

PDF download Download Article
  1. You’ll usually find metal removal clips on the sides of your frame near the top of the window. Pry the clips open by hand or with a flathead screwdriver so they poke out from the frame. Flip the clips out on each side to catch the balancing system that’s hidden inside of the window. [24]
    • If your window has removal buttons on top of the sliding section, then it will not have any clips.
  2. Unlock your window and lift the sliding section up. If your window has removal clips, lift your window all the way up until you feel tension. Slowly slide the window horizontally to pop it out of the frame. On a window that tilts open, press the buttons on top of the sash and tilt it toward you to pull it out from your window.
    • Some windows may have plastic guards at the top of the frame that prevent you from removing the window. Pop them out by hand or unscrew them with your screwdriver.
  3. Window Repair Technician Michael Fox explains, "when your vinyl window [gets stuck], you'd want to check the balances to make sure [they] are either hooked up or operational. [...] Almost all windows have broken balances; [the balance] wears out over time." Hold onto the top of the long metal cover and slowly tilt the bottom of the balance spring away from the side. You’ll feel the balance spring come loose so you can unhook it from the frame. Then, remove the spring from the other side of the window. Hook your new balance springs in the holes and tilt them back against the sides until they click into the removal clips. [25]
    • The balance springs are long metal pieces that run along the side of the window so it’s easier to open and close.
    • If there is a stamp on the balance check the stamp's weight and number in order to reorder the same balance.
    • Depending on the brand and model of your window, you may need to unscrew the balance spring with a Phillips screwdriver.
  4. Balance shoes are small pieces in the tracks that support the weight of the window. Insert a flathead screwdriver into the horseshoe-shaped hole and turn it 90 degrees clockwise. Lift the shoe up about 3–5 inches (7.6–12.7 cm) above the bottom of the frame. Turn the horseshoe 90 degrees counterclockwise so the opening points up to lock the shoe in place. Then repeat the process on the other side so they’re raised to the same height. [26]
    • Sometimes, your window might pop out of the shoes if you try to tilt it in before you raise it.
  5. On a window with balance springs, position the sash in the frame 2–3 in (5.1–7.6 cm) above the removal clips. Slowly lower the window down so the springs lock back into the window. If your window has balance shoes, place the bottom pins of the sash into the horseshoe-shaped holes and tilt the window back into the frame. [27]
    • If your window still doesn’t function properly, call a professional service to repair it.
    6. Advertisement

Expert Q&A

Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      • If you don’t feel comfortable working on your windows, then contact a professional service to make the repairs for you.
        Thanks
        Helpful 0 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Be extremely careful when lifting the sash out from your window since you could break the glass if you drop it.
        Thanks
        Helpful 0 Not Helpful 0
      Advertisement

      Things You’ll Need

      Cleaning

      • Vacuum with hose attachment
      • Dish soap
      • Paper towel or non-abrasive cleaning cloth
      • Silicone lubricant spray

      Track Repairs

      • Straight piece of wood
      • Mallet
      • Replacement sill track

      Roller Removal and Installation

      • Flathead screwdriver
      • Phillips head screwdriver
      • Window roller wheels

      Vertical Balance Spring Replacement

      • Flathead screwdriver

      You Might Also Like

      How to
      Pick Locks On Doorknobs: Knob Types & Lockpicking Tutorials
      How to
      Adjust a uPVC Window
      How to
      Install a Door Knob
      How to
      Remove a Door Handle
      5 Ways to Fix a Broken Door Frame
      How to
      Adjust a Standard Door Closer
      How to
      Frame a Door Opening
      How to
      Rethread a Roller Blind Cord
      How to
      Replace a Door Handle
      How to
      Reset a Ring Doorbell
      Easy Fixes for Ring Doorbell Flashing Blue
      How to
      Seal a Door
      How to
      Remove a Ring Doorbell Cover
      How to
      Stop Condensation on Windows
      Advertisement

      References

      1. ↑ https://www.milgard.com/sites/default/files/new-series/how-to-instructions/how_to_maintain_your_sliding_window.pdf
      2. ↑ https://youtu.be/FK59KzlmQ2g?t=32
      3. ↑ https://youtu.be/P0E7uOQazHc?t=44
      4. ↑ https://www.bobvila.com/articles/how-to-clean-window-tracks/
      5. ↑ https://youtu.be/P0E7uOQazHc?t=61
      6. ↑ https://www.bobvila.com/articles/how-to-clean-window-tracks/
      7. ↑ https://www.bobvila.com/articles/how-to-clean-window-tracks/
      8. ↑ https://youtu.be/bfy7r2yWxuM?t=63
      9. ↑ https://youtu.be/bfy7r2yWxuM?t=80
      1. ↑ https://www.milgard.com/sites/default/files/new-series/how-to-instructions/how_to_maintain_your_sliding_window.pdf
      2. ↑ https://youtu.be/nyfp1nPW3RA?t=20
      3. ↑ https://youtu.be/9OZfLArok1E?t=26
      4. ↑ https://www.milgard.com/sites/default/files/new-series/how-to-instructions/how_to_maintain_your_sliding_window.pdf
      5. ↑ https://www.rbawyoming.com/windows/how-to-fix-common-sliding-window-problems/
      6. ↑ https://youtu.be/T3sOBW-AIog?t=159
      7. ↑ https://www.bhg.com/home-improvement/windows/window-repair/how-to-repair-sliding-windows/
      8. ↑ https://www.bhg.com/home-improvement/windows/window-repair/how-to-repair-sliding-windows/
      9. ↑ https://www.milgard.com/sites/default/files/u/u45061/how_to_install_and_adjust_rollers_for_a_horizontal_sliding_window.pdf
      10. ↑ https://youtu.be/MYrPoPi6QzY?t=61
      11. ↑ https://www.bhg.com/home-improvement/windows/window-repair/how-to-repair-sliding-windows/
      12. ↑ https://youtu.be/UbN1ZeNr-Wo?t=50
      13. ↑ https://youtu.be/T3sOBW-AIog?t=109
      14. ↑ https://www.milgard.com/sites/default/files/u/u45061/how_to_install_and_adjust_rollers_for_a_horizontal_sliding_window.pdf
      15. ↑ https://youtu.be/-TAjm4X8ubI?t=43
      16. ↑ https://youtu.be/hB_wGFn55ig?t=68
      17. ↑ https://youtu.be/j-mG2fh0Z0o?t=34
      18. ↑ https://youtu.be/-TAjm4X8ubI?t=152

      About This Article

      Thanks to all authors for creating a page that has been read 57,610 times.

      Did this article help you?

      Advertisement