How to Replace Your Car Door

PDF download Download Article
PDF download Download Article

There may come a time in your car’s life when you will need to replace a door. Maybe the door is rusting over, or maybe it’s dented beyond repair. You may also find that removing a door will give you a much more usable opening for larger objects, so knowing how to remove and reattach your door will come in handy even if it isn’t damaged. Whatever your reason may be, removing and replacing a car door is not a very difficult process, and doesn’t require a huge, expensive mechanics tool set.

Get Car Support Solve Any Problem

wH
Hi there! Do you have a question about how to diagnose or fix a problem with your car? I’ve read the manual so you don’t have to. Select your make, model, and year, then ask away!
*
*

Steps

PDF download Download Article
  1. If you are replacing your door (instead of simply removing it for better access) make sure the door that you’ve procured is correct by physically checking it against the door you are replacing.
  2. Check the bolts on the doors hinges and door holder (see step 4) to find the correct size.
    Advertisement
  3. Most new vehicles have a lot of wiring in their doors. That wiring is connected to the control computers in the car. In order to prevent the wiring from getting damaged or corroded, manufacturers enshroud the wiring that travels from the car body to the door in a rubber tube. [1]
    • Pull the rubber tube out of it’s recess in the door or car body, and push it back until you reveal an electrical connector (try not to tear the rubber).
    • Pull the connector apart: Depress the tab and separate the door connector half from the car body connector half.
    • Some connectors are more complicated. If your connector appears to have two tabs on it, try pulling the centermost tab out of the connector (it may not come all the way out) and then push in the other tab and pull them apart. Be careful, especially if your car is older.
  4. The door holder is a small plastic stick that slides in and out of the door as the door opens and closes. The door holder is only intended to keep the door from opening and closing by itself and is very weak. You do not want the weight of the door on the door holder. [2]
    • Unbolt the door holder from the body of the car.
    • Note: In some vehicles the door holder is an integrated piece on one or both of the door hinges. If you find this is the case, skip to the next step.
  5. [3]
    • Have a friend hold the door to prevent it from falling while you are trying to work on it
    • Unbolt the hinges from the door.
  6. [4]
    • With the bolts removed, the door should basically fall away from the car body.
    • Stand the car door upright against a wall, the window can break easily, so try not to stress it more than necessary.
  7. If they are still attached, remove them. Don’t throw them away, they may be useful if something ever happens to the hinges still on the car.
    • Have your helper hold the door up in an approximation of where the old door was when open.
    • While your helper holds the door, guide the door up to the hinges and line the bolt holes on the hinges up to the bolt holes on the door.
  9. [5]
    • Place the hinge bolts into their bolt holes and spin the bolts in with your fingers.
    • Once you’ve tightened the bolts a few turns with your fingers, tighten them the rest of the way down with the wrench.
    • Do not use the wrench to position the bolts, they can cross-thread and do damage to the new door if positioned incorrectly.
    • Plug the new door connector into the car body connector (if your door connector involved more than one tab, make sure to push both tabs into position).
  13. [6]
    • Turn the car on and actuate all of the switches on the door to make sure they are all working.
    • Roll the window all the way up and all the way down. Make sure the new window has the entire range of motion that the original window had.
    • Close the door, if it looks like it fits, skip ahead one step.
  15. Hinge bolts are the only way to adjust the door fit without serious body work.
    • Loosen the door hinge bolts slightly, just enough to shift the door, try to move the door in the hinge bolt holes. (Not every car will be able to move the door within the bolt holes. If this is the case, bodywork may be needed to get a perfect fit).
  16. Thread locking fluid will prevent the door hinge bolts from loosening due to vibrations in the car. [7]
    • Unbolt each bolt one at a time (do not remove all of the bolts at once).
    • Paint a thin film of thread locker onto the bolt thread.
    • Re-position the bolt and tighten it down.
    • Repeat this process with each bolt that you had to remove during the door replacement.
    • You should be able to start driving the car right away once the tightening process is finished.
    17. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    Can you replace your car door panel?
    Ed Beery
    Automotive Specialist
    Ed Beery is an Automotive Specialist and the Owner of InTechgrity Automotive Excellence based in Denver, Colorado. With more than eight years of experience, he specializes in providing maintenance and repair services for both individuals and companies. Ed and the InTechgrity Automotive Excellence Team are approved by the American Automobile Association (AAA) for repairs and are Automotive Service Excellence (ASE) certified.
    Ed Beery
    Automotive Specialist
    Expert Answer
    Sure! Nowadays, there are many varieties of door panel clips and many clip removal tool kits available at reasonable prices. Do not use a straight edge screwdriver to remove a door panel as significant scarring to the panel and the door often results. Be patient and use as little force as possible when prying on a clip. This will reduce damage to the clip, your pry tool, and the vehicle, reducing rework and headaches.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 1 Helpful 3
  • Question
    If I have frame damage is it still possible to align a new door?
    Community Answer
    It depends on the amount and location of damage. If the damage did not affect the geometry of the door opening, it is possible.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 1 Helpful 9
  • Question
    What tool do you need to remove the studs?
    Community Answer
    If by "studs" you mean the plastic pins holding together the car trim and fastening it to the metal parts of the car, there are very inexpensive plastic kits for trim removal. The tools look like plastic spatulas and small flat bars, some with notches. Check Harborfreight, Amazon and eBay.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 3 Helpful 7
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      • If your new door is a different color, you can try painting it. [8] If you’re not comfortable with painting, a body shop can take care of the painting for you.
        Thanks
        Helpful 2 Not Helpful 1
      • Any time you are doing work on a vehicle, remember to put all of the parts that you remove into a box (or any type of storage device) so you don’t lose parts. If the work you doing is complicated, use several storage devices and label them. Sure, it takes more time, but the bolt that gets lost is the one you need the most.
        Thanks
        Helpful 2 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Things You'll Need

      • Wrenches (a socket set will work best)
      • A friend
      • Replacement door (if you're replacing the door)
      • Thread locking fluid
      • A box (for your bolts)

      You Might Also Like

      How to
      Replace a Power Window Motor
      How to
      Remove a Door Panel from a Car
      How to
      Keep Car Doors from Freezing Shut
      How to
      Reset a Traction Control Light (TCS)
      How to
      Reset Your Steering Angle Sensor Without an OBD-2
      How to
      Get Out of Limp Mode: 5 Ways to Bypass, Signs, & More
      "Stop Vehicle Leave Engine Running" Mercedes-Benz Warning: Causes & Fixes
      How to
      Fix a Locked Steering Wheel
      What to Do If Your Car’s Anti-Theft System Prevents It from Starting
      How to
      Change an Oxygen Sensor
      Quick and Easy Steps to Reset the Maintenance Required Light
      How to
      Open a Hood with a Broken Latch
      How to
      Reset a Gas Gauge Needle
      How to
      Fix a Cigarette Lighter in a Car
      Advertisement

      References

      1. ↑ https://www.howacarworks.com/bodywork/replacing-a-car-door
      2. ↑ https://www.youtube.com/watch?v=TpR_7GlKIIA
      3. ↑ https://www.youtube.com/watch?v=TpR_7GlKIIA
      4. ↑ https://www.youtube.com/watch?v=TpR_7GlKIIA
      5. ↑ https://www.popularmechanics.com/cars/how-to/a5508/4350218/
      6. ↑ https://www.youtube.com/watch?v=TpR_7GlKIIA
      7. ↑ https://www.popularmechanics.com/cars/how-to/a1172/4208687/
      8. ↑ https://www.youtube.com/watch?v=S4uUr9XlKRo

      About This Article

      In other languages
      Thanks to all authors for creating a page that has been read 215,374 times.

      Reader Success Stories

      • Joe Wigllaf

        Jun 24, 2016

        "The part about door wiring was most helpful. Although the information was helpfull in general, as I'm fixing ..." more
      More reader stories Hide reader stories
      Share your story

      Did this article help you?

      Advertisement