Download Article
Download Article
Carbon monoxide detectors are important safety features in your home that protect you from deadly gasses. When the alarm goes off, resetting it stops it from beeping and restarts the carbon monoxide detection to ensure it’s working properly. You’ll only need to reset your detector when it goes off, and it only takes a few seconds to do. Keep reading for everything you need to know about how and when you should reset your carbon monoxide detector.
Things You Should Know
- Press the Reset button on the front of the carbon monoxide detector once to reset it. Instructions may vary so check your manual.
- Use the Reset button whenever the alarm is sounding or when you change the batteries.
- If the alarm starts again after pressing the Reset button, get everyone in the household to fresh air and call emergency services.
Steps
Section 4 of 4:
Testing a Carbon Monoxide Detector
-
Test your carbon monoxide alarm weekly. Find a time during your weekly routine when you can quickly test your carbon monoxide detector to ensure it’s working. That way, you can quickly catch when you need to replace batteries or the entire unit. [7] X Research source
-
Press and hold down the Test button for 5–10 seconds. Some carbon monoxide detectors have a separate Test button while others have a joint Test/Reset button. Hold the button down any time when the alarm isn’t going off to run the test cycle . [8] X Research source
-
Listen for 4 short beeps to ensure the alarm is working properly. The test alarm beeps sound similar to when the carbon monoxide detector goes off during a real emergency. Listen for the beeps and watch the LED light to make sure it blinks. [9] X Research source
- Every model of carbon monoxide detector is different, so check the instructions to learn how to properly test it.
- If your alarm doesn’t beep, then you may need to replace the batteries.
Advertisement
Expert Q&A
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Warnings
- If the alarm sounds and you have a headache, dizziness, or shortness of breath, get to fresh air immediately to avoid carbon monoxide poisoning . [10] X Trustworthy Source Cleveland Clinic Educational website from one of the world's leading hospitals Go to sourceThanks
- Avoid trying to find the source of a carbon monoxide leak if your alarm is going off. Contact emergency services to let them determine the cause safely. [11] X Trustworthy Source Consumer Products Safety Commission Independent U.S. government agency responsible for protecting consumers by developing safety standards and conducting product research Go to sourceThanks
Advertisement
References
- ↑ https://cms.dsc.com/download.php?t=1&id=16874
- ↑ https://defenderdetectors.com/manual/ll6170.pdf
- ↑ https://www.shareddocs.com/hvac/docs/2001/Public/0C/User-Guide-KN-COB-LCB-A-ENG-(2.pdf
- ↑ https://advancedsecurityllc.com/wp-content/uploads/Honeywell%205800CO-Installation-Instructions.pdf
- ↑ https://www.cdc.gov/carbon-monoxide/about/
- ↑ https://simplisafe.com/files/ss_co_manual.pdf
- ↑ https://simplisafe.com/files/ss_co_manual.pdf
- ↑ https://jmacfiles.s3.amazonaws.com/CO3-InstallationManual.pdf
- ↑ https://cms.dsc.com/download.php?t=1&id=16874
About This Article
Thanks to all authors for creating a page that has been read 28,987 times.
Advertisement