PDF download Download Article PDF download Download Article

This wikiHow teaches you how root your Samsung Galaxy Tab 3 using free tools called Odin and SuperSU. Rooting requires a bit of technical know-how and is not supported by Samsung or Google. You'll need a PC running Windows and a USB cable to complete the rooting process.

Samsung Galaxy Tab 3 Rooting Overview

Charge your tablet and back it up, then put your tablet in Developer Mode. Install Odin, SuperSU, and the drivers for your Galaxy Tab 3 on your PC. You'll also need the root package for your Galaxy Tab 3 model. Put your tablet in Download Mode and connect to your PC, then run Odin and follow the on-screen guide.

Part 1
Part 1 of 3:

Preparing the Tablet

PDF download Download Article
  1. The rooting process may take up to several minutes to complete and requires near-full battery life. [1]
    • Rooting is not supported by Android or Samsung. It is also not guaranteed to work successfully on all tablets. Keep this in mind when attempting to root and do so at your own risk. If your Galaxy Tab 3 becomes bricked or inoperable after rooting, see this wikiHow for more information.
    • Rooting your Galaxy Tab 3 will void the manufacturer’s warranty. To reinstate your warranty, or to undo rooting, follow these steps to unroot your Android and restore the original factory settings.
  2. Rooting erases all of your data, so you'll probably want to back up everything on your tablet. You can use Google’s servers, an SD card, your computer, or a third-party cloud storage service to back up your data.
    • See this wikiHow for more information on backing up your Samsung Galaxy.
    Advertisement
  3. It's at the bottom-left corner of the screen.
  4. After the 7th tap, you'll see a message that says you are now a Developer.
  5. This menu appears only after tapping the build number 7 times.
  6. This allows you to make changes to your tablet after connecting the device to your computer via USB.
  7. There are three different versions of this tablet: 7.0, 8.0, and 10.1. The model numbers refer to the tablet's screen size in inches. If you're not sure of your tablet's size, you can find it in the About device section of the Settings app.
  8. Advertisement
Part 2
Part 2 of 3:

Installing Odin

PDF download Download Article
  1. Go to https://odindownload.com in your PC's web browser. This is a download site for Odin, a tool you'll need to install to root your tablet.
  2. The version you select depends on the version of Android that's running on your tablet. [2]
    • If you're using Jellybean or KitKat, select 3.09 .
    • For Lollipop, select 3.10.7 .
    • For Marshmallow, select 3.11.1 .
  3. Depending on the version, you may have to click Download now or select the version again first. This downloads a ZIP file containing Odin to your computer.
  4. You can do this by right-clicking the downloaded folder, selecting Extract All , and then choosing a destination.
  5. Go to https://www.samsung.com/us/support/downloads on your computer. Now you'll need to install some files on your computer that allow you to connect to the tablet via USB.
  6. To do this, select Mobile , click Tablets , then Galaxy Tabs , and then choose your version from the "MAKE SELECTION" drop-down menu.
  7. A list of downloads will appear.
  8. This downloads the drivers as an installation program.
  9. Double-click the downloaded file (it should begin with "SAMSUNG_USB_Driver" and end with ".EXE"). You may have to give the app permission to run. Once you do, follow the on-screen instructions to complete the installation.
  10. You can download the latest version of SuperSu zip here . This saves a ZIP file to your PC. You won't need to unzip it, but remember where it's located.
  11. Advertisement
Part 3
Part 3 of 3:

Rooting Your Tablet

PDF download Download Article
  1. Follow these steps to do so: [3]
    • Turn off your tablet by pressing and holding the Power button.
    • Press and hold the Volume Down + Home + Power buttons on your tablet.
    • After about 2-3 seconds, lift your fingers from these buttons.
    • Press the Volume Up key when you see the warning screen with an exclamation point. The tablet is now in Download Mode.
  2. You can do this by right-clicking the file called Odin.exe on your PC, selecting Run as administrator , and then following the on-screen instructions.
  3. Odin will take a moment to detect your tablet. Once detected, it'll appear as “Added” in the Odin message box.
  4. This is the file you downloaded earlier that's specific to your model.
    • The name of this button varies depending on the version.
  5. [4]
  6. Odin will begin rooting your tablet, which may take several minutes to complete. When the installation is finished, you'll see "Pass" in the Odin message box.
  7. Don't unplug the USB cable, as you'll need to flash SuperSU next.
  8. Follow these steps to do so:
    • Press and hold Volume Up + Home + Power buttons on the tablet.
    • When you see the Samsung logo, release the Power button but continue holding down the Volume Up and Home buttons.
    • Lift your fingers from the remaining buttons when you see the screen with "TWRP" at the top-left corner.
  9. A list of files will appear.
  10. A confirmation message will appear.
  11. This flashes SuperSU to your tablet, which will give you root access. Once the flash is complete, move to the next step.
  12. You can do this in the Reboot section under System . Once your tablet reboots, the SuperUser app will appear in your app drawer, which indicates that the rooting was successful.
    • You can disconnect the tablet from your computer now as well.
  13. Advertisement

Community Q&A

Search
Add New Question
  • Question
    What happens if it says fail in the box that is supposed to say pass?
    ThomasM10
    Community Answer
    If the process initiated through Odin fails, your phone or tablet will most likely restart (because of auto restart feature being checked by default). If you can see the lock screen, good news, your device has survived the failed process. If it bricks, however, meaning that it becomes unusable, renew the procedure via Samsung's own recover utility: Samsung Smart Switch.
  • Question
    I'm at part 3 step 10. I see a supersu folder on the tablet but no file.
    Ben Tuitama
    Community Answer
    The "11 Download SuperSU to your PC" requires you to copy the file from your PC to the tablet either into the internal storage or SD card.
Ask a Question
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Thanks for submitting a tip for review!

      About This Article

      Article Summary X

      1. Back up and charge your tablet.
      2. Enable USB debutting.
      3. Download Odin, the root package, and USB drivers to your PC.
      4. Download SuperSU to your PC.
      5. Put the tablet into Download Mode and connect it to the PC.
      6. Run Odin as an administrator.
      7. Choose your rooting options and click Start .
      8. Boot into recovery mode.
      9. Tap Install and select the root package.
      10. Confirm and reboot.

      Did this summary help you?
      Thanks to all authors for creating a page that has been read 134,322 times.

      Is this article up to date?

      Advertisement