PDF download Download Article PDF download Download Article

This wikiHow teaches you how to set up a computer network for a group of Windows or Mac computers. You can set up a wireless network for a few computers, or you can use a wired connection if you're adding a large number of computers to a network.

This article is based off an interview with our network engineer & desktop support specialist, Spike Baron. Check out the full interview here.

Method 1
Method 1 of 4:

Using a Wireless Network on Windows

PDF download Download Article
  1. Click the network to which you want to connect each of your network computers.
    Advertisement
  2. It's in the lower-right side of the network's name box.
  3. Type in the network's password when prompted.
  4. It's below the network. As long as the password is correct, doing so will connect you to the network.
  5. For each computer that you want to use in your network, repeat the Wi-Fi connection process. Once each computer is connected to the Wi-Fi network, you can proceed with setting up file sharing. [1]
  6. Doing so will search your computer for the Control Panel app.
  7. It's a blue rectangle icon at the top of the Start menu.
  8. This option resembles a set of blue monitors.
    • If you see "Category" in the upper-right side of the page, first click the Network and Internet heading on the main Control Panel page.
  9. It's a link in the upper-left side of the page.
  10. This will ensure that your computer can interact with other computers that are plugged into the Internet source. [2]
    • You can also enable the "Turn on file and printer sharing" option and the "Allow Windows to manage homegroup connections" option if they aren't automatically selected.
  11. It's at the bottom of the page.
  12. Once each computer in the networked group has network discovery enabled in Control Panel, your wired network will be ready to use.
  13. Advertisement
Method 2
Method 2 of 4:

Using a Wireless Network on Mac

PDF download Download Article
  1. Click the Wi-Fi network to which you want to connect each computer in your network.
  2. Type the password for the network into the "Password" field.
  3. It's at the bottom of the window. Doing so will connect your computer to the Internet.
  4. For each computer that you want to use in your network, repeat the Wi-Fi connection process. Once each computer is connected to the Wi-Fi network, you can proceed with setting up file sharing. [3]
  5. It's near the top of the drop-down menu.
  6. You'll find this blue folder-shaped icon in the middle of the System Preferences window.
  7. It's on the left side of the page. This will ensure that you can share files from your computer to other computers on the network. [4]
    • You can check any other file sharing options that you want to use for your network here as well.
  8. Your changes will be saved; the current computer is now set up for network sharing.
  9. Each computer that's connected to your Internet source will need file sharing to be enabled. Once you've completed this process, your wireless network will be ready to use.
  10. Advertisement
Method 3
Method 3 of 4:

Using a Wired Network on Windows

PDF download Download Article
  1. You'll need an Internet source (e.g., a router) into which you can plug each individual computer, as well as Ethernet cables to connect the computers to the Internet source.
    • Most standard routers only come with a few Ethernet ports, but you can buy network hubs that support upward of 10 connections.
    • Make sure that you know the approximate distance from each computer to the Internet source. You'll need Ethernet cables that can span this distance.
  2. Plug one end of an Ethernet cable into the "Internet" port on the back of the modem, then connect the other end of the cable to the "Internet" or "Ethernet" port on your Internet source.
    • You'll also need to plug in the Internet source's power cable before proceeding.
  3. Attach one end of an Ethernet cable to the square Ethernet port on your computer, then attach the other end of the cable to the Internet source.
    • Typically speaking, you'll use desktop computers for a network, which means the Ethernet ports will be on the back of each CPU box.
  4. Doing so will search your computer for the Control Panel app.
  5. It's a blue rectangle icon at the top of the Start menu.
  6. This option resembles a set of blue monitors.
    • If you see "Category" in the upper-right side of the page, first click the Network and Internet heading on the main Control Panel page.
  7. It's a link in the upper-left side of the page.
  8. This will ensure that your computer can interact with other computers that are plugged into the Internet source.
    • You can also enable the "Turn on file and printer sharing" option and the "Allow Windows to manage homegroup connections" option if they aren't automatically selected.
  9. It's at the bottom of the page.
  10. Once each computer in the networked group has network discovery enabled in Control Panel, your wired network will be ready to use. [5]
  11. Advertisement
Method 4
Method 4 of 4:

Using a Wired Network on Mac

PDF download Download Article
  1. You'll need an Internet source (e.g., a router) into which you can plug each individual computer, as well as Ethernet cables to connect the computers to the Internet source.
    • Most standard routers only come with a few Ethernet ports, but you can buy network hubs that support upward of 10 connections.
    • Make sure that you know the approximate distance from each computer to the Internet source. You'll need Ethernet cables that can span this distance.
  2. Plug one end of an Ethernet cable into the "Internet" port on the back of the modem, then connect the other end of the cable to the "Internet" or "Ethernet" port on your Internet source.
    • You'll also need to plug in the Internet source's power cable before proceeding.
  3. Attach one end of an Ethernet cable to the square Ethernet port on your computer, then attach the other end of the cable to the Internet source.
    • Typically speaking, you'll use iMac computers for a network. This means that you'll find the Ethernet port on the back of the iMac's monitor.
    • If you're using Mac laptops for your network, you'll need to buy a USB-C network adapter for your computer and then plug it into one of the USB-C slots on the side of your Mac, since Mac laptops no longer include Ethernet ports.
  4. It's near the top of the drop-down menu.
  5. You'll find this blue folder-shaped icon in the middle of the System Preferences window.
  6. It's on the left side of the page. This will ensure that you can share files from your computer to other computers on the network. [6]
    • You can check any other file sharing options that you want to use for your network here as well.
  7. Your changes will be saved; the current computer is now set up for network sharing.
  8. Each computer that's connected to your Internet source will need file sharing to be enabled. Once you've completed this process, your wired network will be ready to use.
  9. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    Can you connect computers to a network with the server settings?
    Spike Baron
    Network Engineer & Desktop Support
    Spike Baron is the Owner of Spike's Computer Repair based in Los Angeles, California. With over 25 years of working experience in the tech industry, Spike specializes in PC and Mac computer repair, used computer sales, virus removal, data recovery, and hardware and software upgrades. He has his CompTIA A+ certification for computer service technicians and is a Microsoft Certified Solutions Expert.
    Network Engineer & Desktop Support
    Expert Answer
    Yes, in the server settings menu, you type SMB colon, forward slash, forward slash, followed by the name of the computer you're looking to connect. That should connect the PC.
  • Question
    Why can't I connect my Mac to a network?
    Spike Baron
    Network Engineer & Desktop Support
    Spike Baron is the Owner of Spike's Computer Repair based in Los Angeles, California. With over 25 years of working experience in the tech industry, Spike specializes in PC and Mac computer repair, used computer sales, virus removal, data recovery, and hardware and software upgrades. He has his CompTIA A+ certification for computer service technicians and is a Microsoft Certified Solutions Expert.
    Network Engineer & Desktop Support
    Expert Answer
    You may not have computer discovery or file sharing turned on. You need the computer to be "unlocked" for it to connect to a network.
  • Question
    How do I set up a computer with proper subnet masks for a local network?
    Community Answer
    Without knowing what IP addresses you are using I can only give you an estimate. I can show the default values based on the private IP addresses I assume you're using. If you see anything between 10.0.0.0 and 10.255.255.254, the default subnet mask is 255.0.0.0. If you see 172.16.0.0 to 172.31.255.254, the default subnet mask is 255.255.0.0. If you see 192.168.0.0 to 192.168.255.254, the default subnet mask is 255.255.255.0, which is the most common range on home equipment and small networks up to 254 computers, so I would guess this is the one you need.
See more answers
Ask a Question
      Advertisement

      Video

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • You may need to increase your Internet plan's maximum speed to accommodate multiple computers, especially if you're connecting over Wi-Fi.
      Advertisement

      References

      1. Spike Baron. Network Engineer & Desktop Support. Expert Interview. 9 January 2019.
      2. Spike Baron. Network Engineer & Desktop Support. Expert Interview. 9 January 2019.
      3. Spike Baron. Network Engineer & Desktop Support. Expert Interview. 9 January 2019.
      4. Spike Baron. Network Engineer & Desktop Support. Expert Interview. 9 January 2019.
      5. Spike Baron. Network Engineer & Desktop Support. Expert Interview. 9 January 2019.
      6. Spike Baron. Network Engineer & Desktop Support. Expert Interview. 9 January 2019.

      About This Article

      Thanks to all authors for creating a page that has been read 244,184 times.

      Reader Success Stories

      • Anonymous

        Feb 15, 2018

        "The tips presented here on wikiHow are very informative. It helped a lot. Thanks."
      Share your story

      Is this article up to date?

      Advertisement