Download Article
Download Article
For most freshwater fishermen, bass is the ultimate quarry. Anglers pursue the rugged game fish for the fight it puts up when hooked and the delicate flavor it yields when grilled. Bass is found in abundance in ponds, lakes, and streams throughout North America, and even novice fisherman can hook them. Pick the right rod, reel, and line combo based on your experience, then learn how to set up some basic hook and lure combos to attract bass.
Steps
-
Choose a spinning reel and rod if you are a beginner. Spinning rods and reels are the easiest setup to use if you are just getting into bass fishing. Use a 6 ft (1.8 m) 6 in (15 cm) spinning rod and reel combo for a balance between easy casting and rod strength to bring the bass in. [1] X Research source- Spinning rods only work with spinning reels and vice versa. A spinning reel sits on the underside of the rod and allows you to cast lightweight lures long distances because of the limited friction.
- You can expect to spend about $150 USD on a quality spinning rod and reel combo.
-
Use a baitcasting rod and reel if you are a more experienced angler. Baitcasting rod and reel combos allow you to use heavier lures and line. Choose a baitcasting reel and a graphite rod to give yourself more power to battle fish and plants in the water. [2] X Research source- Baitcasting reels sit on the top side of the rod. You should master casting with a spinning rod and reel before you move on to using a baitcasting reel , as casting is more difficult with this type of reel.
Advertisement -
Select nylon monofilament line to use with a spinning rod and reel. Monofilament line is affordable and easy to use for beginner bass fishers. It is easy to cast with a spinning rod and reel combo. [3] X Research source- The downside of monofilament line is that it is easier to damage or break.
- You should use 8–10 lb (3.6–4.5 kg) diameter monofilament line.
-
Use fluorocarbon or braided line with a baitcasting reel and rod. Both fluorocarbon and braided lines are stronger than monofilament and work well with baitcasting rod setups. Braid is the hardest line to cast, so only use it if you are confident in your baitcasting skills. [4] X Research source- For fluorocarbon line, you should use 12–15 lb (5.4–6.8 kg) diameter line.
- Use 10–20 lb (4.5–9.1 kg) diameter braid line if you go with this option.
-
Spool the line onto your reel. Fill the spool of the reel up all the way for spinning reels, and fill a baitcasting reel to between 1 ⁄ 8 in (0.32 cm) from the top and all the way to the top. It’s important to have enough line on the reel so that you will be able to make a long cast. [5] X Research source- If you overfill the spool on a spinning reel with line, then the line will jump off the reel. If you overfill a baitcasting reel, then you will hear a weird sound when you cast.
Advertisement
-
Tie on a worm hook if you want to use live bait. Release the drag on the reel and thread the line through the ceramic guides on the fishing pole. Tie the hook to the line with a palomar knot . [6] X Research source- You can use a worm hook with both live worms and rubber worms.
- Worms are a good bait to fish for bass with because they will often go for the worm right away as it falls through the water.
-
Set up a Texas rig for a basic bass fishing lure rig. Slide a cone-shaped weight onto the line with the point facing the end of the line. Tie on a worm hook and thread a rubber worm on so that the tip of the hook is hidden. [7] X Research source- The cone-shaped weight will slide up and down the line as you fish for bass, which creates line action that they are attracted to.
- The Texas rig is the most popular and common rig for bass fishing.
-
Use a Carolina rig when bass are being timid. Slide on a 3–4 oz (85–113 g) or egg weight first, followed by a swivel. Tie on an offset worm hook with a palomar knot and slide any type of rubber bait you want onto the hook. [8] X Research source- The Carolina rig is good for passing through vegetation where bass are hiding when they are being shy of your bait. If bass are shooting for your bait on a Texas rig or a normal worm hook setup, then there is no need to use the Carolina rig.
-
Setup a drop shot rig to reach bass at the bottom. Double the line before you pass it through the eye of a worm hook to leave a tag end. Tie a palomar knot on the hook and then pass the tag end through the eye. Tie a weight to the end of the tag line and put a rubber worm or other lure on the hook. [9] X Research source- The hook should be sticking out at a 90-degree angle from the line.
- This rig setup works well for bass fishing, as well as when fishing for other bottom feeders, such as catfish.
Advertisement
Community Q&A
Search
-
QuestionCan you bass fish with a closed rod?Community AnswerYou can but, to use lures, I would recommend a spinning rod if you are just starting with open-faced reels.
-
QuestionDo you use a float over the lawyer to keep it off the bottomGavin DonnellyCommunity AnswerMost bass fishing setups do not use floats, since they are bottom feeders. You want the bait to reach the bottom and then slowly drag it towards you to lure in the bass.
-
QuestionWhat's the best way to tie a frog?Community AnswerTie it like you would tie any other lure, but if you want you can strengthen the knot by looping the line multiple times through the eye of the hook before tying the knot.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
Tips from our Readers
The advice in this section is based on the lived experiences of wikiHow readers like you. If you have a helpful tip you’d like to share on wikiHow, please submit it in the field below.
- Make sure you have the right pound test (line), which is located on the reel. When you get a new pole, check the length of the pole for the pound test (line)—the amount the pole can hold is all located there.
- When you're fishing and your line gets stuck, try tugging at an angle backwards lightly—it should come free.
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
References
- ↑ https://www.tacklescout.com/bass-fishing-for-beginners/
- ↑ https://www.tacklescout.com/bass-fishing-for-beginners/
- ↑ https://www.tacklescout.com/bass-fishing-for-beginners/
- ↑ https://www.tacklescout.com/bass-fishing-for-beginners/
- ↑ https://www.bassmaster.com/jordan-lee/spool-your-reels-correctly
- ↑ https://myodfw.com/articles/how-fish-bass
- ↑ https://www.takemefishing.org/how-to-fish/fishing-knots-and-rigs/types-of-bass-fishing-rigs/
- ↑ https://www.wideopenspaces.com/5-bass-fishing-rigs-will-guarantee-catch/
- ↑ https://www.takemefishing.org/how-to-fish/fishing-knots-and-rigs/types-of-bass-fishing-rigs/
About This Article
Article Summary
X
To set up a fishing pole for bass fishing, you’ll want to pick the right rod, reel, and line combo. If you’re new to bass fishing, choose a spinning reel and rod, which are the easiest to set up. Pair it with a nylon monofilament line for an affordable and easy combination. For those with more experience, pick a baitcasting rod and reel, which will allow you to use heavier lures and lines for bigger bass. You can pair this with a fluorocarbon or braided line, which are harder to cast but are stronger than monofilament lines. For the most common and popular lure, set up a Texas rig and put a live worm at the end. To learn how to pick the best hooks and lures for when the bass are being timid, keep reading!
Did this summary help you?
Thanks to all authors for creating a page that has been read 239,741 times.
Advertisement
"All the info helped. I'm a first time fisherman."
