How to Sew Armrest Covers for Sofas

PDF download Download Article
PDF download Download Article

You don't need to be a professional upholsterer or take complicated measurements to make armrest covers. To get great looking covers that blend in with your sofa, just drape matching fabric over the armrests and draw the measurements on. Spend a few minutes cutting and sewing to create covers that protect your couch from natural oils, sweat, and stains. You'll extend the life of your sofa and save a little money doing it!

Things You Should Know

  • To make your own protective armrest cover, cut a piece of fabric so it's 1 inch wider than the front of your armrest and as long as you want the cover to be.
  • Trim one end of the fabric so it's shaped like the top of the front of your armrest.
  • Drape a long piece of fabric over the arm of the sofa and mark where you want the cover to end, then cut the long piece to this length.
  • Line up the curved fabric to the front end of the long piece and sew the edges together, then sew a hem on the bottom edges of the cover to keep the fabric from fraying.
Part 1
Part 1 of 3:

Cutting the Front Cover Piece

PDF download Download Article
  1. Take a measuring tape or ruler and hold it horizontally across the widest part of the armrest. Add 1 inch (2.5 cm) to this measurement and write it down so you know how wide to cut the front cover piece. [1]
    • For example, if your armrest is 8 inches (20 cm) across, add 1 inch (2.5 cm) for the seam allowance to get 9 inches (23 cm).
  2. Turn your ruler or measuring tape vertically against the armrest and decide how far down you want the cover to go. To help you visualize the endpoint, mark the armrest with chalk. Then, write down your measurement. [2]
    • It's completely up to you to determine how long to make your armrest covers. In general, they usually cover the curve of the armrest and extend down by at least a few inches.
    • For example, to make the armrest come halfway down your sofa, your measurement might be 12 inches (30 cm) long.
    Advertisement
  3. Get out a heavy piece of fabric that's the same as the sofa fabric. Then, cut a piece that's the size as the measurements you took. Keep in mind that you don't need to cut it perfectly smooth since you'll be trimming the piece some more. [3]
    • If your measurements were 9 by 12 inches (23 cm × 30 cm), cut the fabric to that size.
    • If you can't find fabric that matches your sofa, choose fabric with a pattern or color that compliments your sofa. Select material that's the same weight and texture as your sofa's fabric.
  4. Hold the fabric piece up to the front of the armrest and line up the top of the piece with the top of the armrest. Take a piece of chalk and mark the edges of the armrest's front. Then, cut 1 inch (2.5 cm) away from your marking line to allow for the seam. [4]
    • Make a mark at the top of the fabric in the center so you know where to line up the finished piece later. Remember to do this on the wrong side of the fabric.
    • If it's tricky to mark the fabric without it moving around, insert pins through the fabric into the armrest to keep it from slipping.
    5. Advertisement
Part 2
Part 2 of 3:

Making the Top of the Cover

PDF download Download Article
  1. Cut out a piece of matching fabric so it's large enough to completely cover the armrest and hang over both sides. Line up the edge of the fabric piece with the end of the armrest. If you don't want it to slide around while you measure, stick a few pins through the fabric and into the sofa. [5]
    • If your sofa has a pattern, line up the fabric piece so it matches the direction of the sofa's pattern.
  2. Once you've positioned the fabric on the armrest, take a piece of chalk and mark the edge of the fabric at the center. Do this on the wrong side of the fabric so you can line it up later before sewing. Then, use your measurement for the length of the front piece to make a mark on each side of the cover with chalk. [6]
  3. Spread the fabric flat on a work surface and use chalk to draw a straight line on each of the long sides to mark the bottom edges of the cover. Then, cut along both lines and trim the end of the armrest where you want it to meet the back of the sofa. Remember to leave 1 ⁄ 2 inch (1.3 cm) for the seam allowance. [7]
    • The shape of your top fabric piece depends on the style of your sofa. Curved armrests usually take more fabric than square or boxy armrests.
    4. Advertisement
Part 3
Part 3 of 3:

Assembling the Armrest Cover

PDF download Download Article
  1. Lay the top piece of the cover flat so the wrong side faces up and find the mark you made near the center of its edge. Then, lay the front piece on top so the mark you made on the center edge lines up with the mark on the top piece. Stick a pin through the edge of the pieces to keep them in place. [8]
    • The right sides of the fabric should be facing each other so you can turn them out once you finish sewing.
    • Although you can try to around the sides of the front piece, this is tricky to do since you'll be easing the fabric around the curve.
  2. Adjust your sewing machine to make straight stitches and begin sewing the front piece to the top. Start in the center edge where the marks line up and sew around the curve down to the bottom edge. Leave a 1 ⁄ 2 inch (1.3 cm) seam allowance and pull the lower layer of fabric towards the top edge as you sew so it gathers instead of staying flat. [9]
    • Use thread that matches the color of your sofa's fabric.
    • Gathering the fabric as you sew the curve is called easing and it prevents the fabric from puckering at 1 end of the curve.
  3. Place the center of the fabric back under the needle. Start sewing where you began before, but sew in the other direction until you reach the bottom edge. Remember to leave a 1 ⁄ 2 inch (1.3 cm) seam allowance. [10]
    • If you're an experienced sewer, you can sew from the bottom edge up along the curve to the center and then down the other edge in 1 pass, but sewing the cover with 2 seams gives you more control.
  4. Fold the edges of the cover under by 1 ⁄ 4 inch (0.64 cm) and fold them by another 1 ⁄ 4 inch (0.64 cm) to make a rolled hem. Sew along the folded edge with a straight stitch and repeat this around every edge of the armrest cover. [11]
    • If you don't want to pin the fabric in place, fold the fabric and iron it. Creasing the fabric holds stops it from unfolding as you sew.
  5. Unfold the finished armrest cover so the raw edges and seams are hidden. Then, put the cover on the armrest so it fits snugly. [12]
    • For an even tighter fit, pin the back edges of the cover to the sofa.
  6. If your sofa armrests are symmetrical, use the same measurements when you sew the front and top pieces. If the armrests curve away from each other, you'll need to adjust the shape of the front piece before you sew the cover.
    • If you need to wash the armrest covers, read the care instructions that came with your sofa. If you're using a different type of fabric, read the bolt or care instructions for the fabric you used.
    7. Advertisement

Expert Q&A

Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      • Sew a topstitch along the folds of the armrest if you want to give it a decorative finish. [13]
        Thanks
        Helpful 1 Not Helpful 0
      • If you can't find matching fabric to make the covers, choose a fabric that's about the same weight that compliments the style of your sofa.
        Thanks
        Helpful 0 Not Helpful 0
      • You can use tailor's chalk or regular chalk to mark your sofa cover fabric. Although you can make more detailed marks with the tailor's chalk, the regular chalk wipes off easily too.
        Thanks
        Helpful 0 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Things You'll Need

      • Sewing machine
      • Matching fabric
      • Thread
      • Scissors
      • Fabric chalk

      You Might Also Like

      How to
      Make a Chair
      How to
      Build a Rocking Chair
      How to
      Rush a Chair
      How to
      Upholster a Bench
      How to
      Web a Chair Seat
      How to
      Make a Hammock Chair
      Advertisement

      References

      1. ↑ https://www.redhandledscissors.com/2014/11/tutorial-simple-fabric-armrest-covers/
      2. ↑ https://youtu.be/FeqXsL__D6I?t=65
      3. ↑ https://youtu.be/FeqXsL__D6I?t=97
      4. ↑ https://youtu.be/2ghjZfFP6JI?t=246
      5. ↑ https://youtu.be/oM8giZsk-w4?t=42
      6. ↑ https://youtu.be/2ghjZfFP6JI?t=128
      7. ↑ https://youtu.be/FeqXsL__D6I?t=187
      8. ↑ https://youtu.be/FeqXsL__D6I?t=242
      9. ↑ https://youtu.be/BLfc2UpucsA?t=301
      1. ↑ https://youtu.be/2ghjZfFP6JI?t=315
      2. ↑ https://youtu.be/2ghjZfFP6JI?t=517
      3. ↑ https://youtu.be/Y4VjF5uwUtM?t=111
      4. ↑ https://youtu.be/2ghjZfFP6JI?t=360

      About This Article

      Thanks to all authors for creating a page that has been read 57,461 times.

      Did this article help you?

      Advertisement