How to Make Round Pillows: Throws, Cushions, & Covers

PDF download Download Article
Learn to sew round pillows in less than 30 minutes with this guide
PDF download Download Article

Pillows are a beginner-friendly DIY project that come in all shapes and sizes. While square and rectangular pillows are the most common, round pillows are a great way to add unique flair to couches, armchairs, and beds. In this guide, we'll teach you how to sew simple throw pillows, seat cushions, and decorative pillows with or without trims and tassels.

Simple Way to Sew a Basic Circle Pillow

  1. Lay two sheets of fabric with the right sides facing in.
  2. Use a large bowl to trace a circle onto the fabric with an erasable pen or chalk.
  3. Pin the edges of both layers together and cut the circle out with fabric scissors.
  4. Sew the edges with a straight stitch, leaving an ½ inch seam allowance and a 4-inch gap.
  5. Cut V-shaped notches into the seam allowance to prevent the fabric from bunching.
  6. Turn the pillow cover inside out through the gap and stuff it with polyester fiberfill.
  7. Stitch the gap shut by hand with a ladder stitch to close it.
Method 1
Method 1 of 3:

How to Sew a Circle Pillow

PDF download Download Article
  1. Lay a fabric sheet on a flat surface with the right side facing you. The "right side" is the front or patterned side of the fabric, while the "wrong side" is the back or blank side. Place another sheet of fabric with the wrong side facing up, and ensure all edges are aligned. [1]
    • A standard circle throw pillow is 16 inches (41 cm) in diameter. However, you can make your pillow as big or small as you want.
    • Choose woven fabric without any stretch, like linen or cotton broadcloth, so your pillow holds its shape over time. You can also use fabric from clothes you no longer wear, which is a great way to repurpose and recycle your items.
  2. Grab a large bowl or similar item to trace a circle onto your fabric. Add 1 to 2 inches (2.5 to 5.1 cm) to your circle's size for seam allowance and cutting. If you're making a cover for an existing pillow, trace 1 ⁄ 2 inch (1.3 cm) around the pillow. [2]
    • You can also make a circle pattern by folding the fabric into quarters. Measure from the center and mark the length of half the diameter plus seam allowance.
    • Repeat this and mark an arc, marking at regular intervals. Then, cut along the marked line.
    • Use white tailor's chalk for dark fabrics or a fabric pen on light fabrics.
    Advertisement
  3. Insert sewing pins through both layers of the fabric just below the template marks to hold it together. Use sharp fabric scissors and cut through both pieces using the template line as a guide. [3]
    • Don't remove the pins; they'll hold the fabric together as you sew.
    • Alternatively, place a hardcover book or a similar heavy item to hold the fabric. Use a circular knife to cut the fabric out and then pin. [4]
    • You could also trace the circle on pattern paper and cut it out to make identical pillows in the future.
    • If you're adding a zipper, cut one circle in half. Then, place the zipper face-down on one half-circle with the fabric right-side up. Line up the straight edge with the zipper and pin it. With a zipper foot on the machine, sew a straight stitch. Repeat with the other half-circle. [5]
  4. Thread your sewing machine with an all-purpose polyester thread that matches the color of your fabric. Select the "straight stitch" setting and begin with a backstitch to secure the stitches. Then, continue to sew along the edges of your pillow with a 1 ⁄ 2  in (1.3 cm) seam allowance. Leave a 4 to 6 in (10 to 15 cm) gap to turn the pillow inside out. [6]
    • Remove the pins as you sew so you don't ruin your sewing machine.
    • Alternatively, sew a straight stitch by hand . Bring the needle up from the bottom of the fabric and back through, making a straight stitch 1 ⁄ 4  in (0.64 cm) long. Repeat this process.
  5. Use sharp fabric scissors to cut V-shaped notches into the seam. Make the notches approximately 1 ⁄ 2  in (1.3 cm) apart and as close to the stitching as possible. This will prevent the fabric from buckling. Be careful not to cut through the stitching to avoid unraveling the thread. [7]
  6. Use the gap and your fingers to push the fabric inside out. Then, flatten out the seams with your fingers or a knitting needle. Grab a handful of polyester fiberfill and stuff it until you reach your desired firmness. [8]
    • Use foam stuffing, microbeads, or old clothes as a substitute for polyester stuffing.
  7. Fold the raw edges of the gap's opening to match the seams. Secure the opening with sewing pins and thread a needle. Use your fingers to pinch the folds together. Then, insert the needle through the right side of the fold. Make a 1cm stitch into the right inside fold and another stitch on the left inside fold. Alternate right and left stitches to make a ladder stitch . [9]
    • Tie a knot, trim the excess thread, and remove the pins afterward.
    8. Advertisement
Method 2
Method 2 of 3:

How to Make a Cushion Pillow

PDF download Download Article
  1. Place a sheet of fabric with the right side facing you on a flat surface. Then, place a second sheet on top with the wrong side facing you. Use a large bowl or similar item to trace a circle with chalk onto the fabric, making a pattern template. [10]
    • If you're making a cover for an existing pillow, add 1 ⁄ 2 inch (1.3 cm) around the pillow instead for seam allowance.
  2. Insert sewing pins inside the circle you drew, pinning through both layers of fabric. Then, cut along the drawn line with fabric scissors. Remove the sewing pins afterward to reveal two identical circles. [11]
  3. Deciding how tall you want your pillow to be differs from the circle's circumference. The pillow’s side (the ring you’ll make) is the height. For instance, you may want your pillow to be an inch in height. Once you’ve decided, measure the circumference of the fabric circle you just cut out. Then, add 1 ⁄ 2 inch (1.3 cm) for the rectangle's length. Cut a strip out of fabric based on these measurements for the pillow's sides. [12]
    • A standard width for a pillow 3 inches (7.6 cm). However, it can be as wide as you want.
    • Use the same color or pattern as the circle or a similar one.
  4. Fold the strip in half with the right side facing in. Pin the fabric, if needed, then sew both ends with a straight stitch and matching thread. Always start and end with a backstitch to secure it. Leave 1 ⁄ 4  in (0.64 cm) for the seam allowance. [13]
    • If you're using pins, remove them as you sew.
    • Use a hot iron to lay the seams flat. This will give you a clean finish.
  5. If you want to secure your cushion to a chair with ties, cut two thin strips of fabric. Then, fold the ends by 1 ⁄ 4 to 1 ⁄ 2 inch (0.64 to 1.27 cm) and flatten it with an iron. Fold the bottom to the middle of the strip and iron. Repeat on the top. Fold the strip in half lengthwise and iron. Sew the edges to secure. [14]
  6. Fold the strips in half width-wise and pin the fold to the right side of the circle. Stitch over the pinned ties using a straight stitch, leaving 1 ⁄ 4  in (0.64 cm) for seam allowance. Remove the pins when you’re done. [15]
    • How far apart you space the ties depends on how wide the backrest of your chair is.
    • If you don’t want to use ties for your cushion, skip this step.
  7. Ensure the right sides of the ring and circle are facing in so you can turn it inside out later. Use a 1 ⁄ 4  in (0.64 cm) seam allowance and backstitch at the start and end of your sewing. Remove the pins as you sew. [16]
  8. Pin the second circle on top of the ring, ensuring the right side faces in. Sew around the circle again. However, this time, leave a 4 to 6 in (10 to 15 cm) gap between the start and end of your sewing for turning the pillow right-side-out. [17]
  9. Work one circle at a time as you cut V-shaped notices into the seams. Space the notches about 1 ⁄ 2 inch (1.3 cm) apart. This will help reduce bulk when you turn the pillow right-side-out. [18]
  10. Flip the pillow inside out with your hands. Use your finger or a knitting needle to push the seams, if necessary. Then, insert a pillow form or polyester fiberfill through the gap. Sew the gap shut using a ladder stitch by hand. [19]
    • If you added ties to the cushion, use it to secure the cushion to your chair.
    11. Advertisement
Method 3
Method 3 of 3:

How to Sew a Decorative Tufted Pillow

PDF download Download Article
  1. Decide how wide your pillow is, then divide it by 2 to get the radius. Calculate the circumference of a circle with an online calculator. Then, use scissors to cut two rectangles out from the fabric. These will be used to form a pillow at the end. [20]
    • Use the radius for the rectangle's height and the circumference for the length.
    • Round the circumference up or down to the nearest whole number to make measuring easier.
    • If you wish to add a trim to your pillow, cut it according to the circumference. Great trims include fringe, mini pompoms, rickrack, lace, and beads.
  2. Match the edge of the trim to one of the long edges of your rectangle. Ensure the trim is on the right side of the fabric and the decorated part is facing inward. [21] Basting is a temporary stitch that holds the fabric in place. You can use basting tape, pins, or loose 1 ⁄ 4  in (0.64 cm) straight stitches. [22]
  3. Pin the rectangles together with the right sides facing in. Sew along the side you added the trim to. Use a straight stitch, a 1 ⁄ 2  in (1.3 cm) seam allowance, and matching thread color. [23]
    • Backstitch when you start and finish sewing, and remove the pins as you go.
    • Use a zipper foot if your fringe is bulky.
  4. Open up your sewn rectangles like a card or a book. Bring the narrow ends together so that the right sides touch. Sew the narrow ends together using a 1 ⁄ 2  in (1.3 cm) seam allowance. [24]
  5. Starting at the side seam, sew a running stitch along the top edge using a 1 ⁄ 2  in (1.3 cm) seam allowance. When you reach the side seam again, pull on the thread to gather the fabric into a smaller ring. Knot the thread securely, then snip the excess off. [25]
    • For extra durability, use a strong, upholstery thread. Knot the ends together to sew with a double rather than a single strand.
    • The longer you make your stitches, the smaller the ring will be. The exact size of the ring does not matter as long as it's smaller than the button you'll be making.
  6. Turn the pillow right-side out first. Insert a pillow form through the un-gathered end. Close the un-gathered end using the same technique as in the previous step: sew along the edge using a running stitch, then pull on the thread to gather the fabric. [26]
  7. Purchase a cover button-making kit in the largest size you can find. Cut two circles out of fabric larger than the buttons, then assemble them according to the kit's instructions. [27]
    • You can use the same color of fabric as your pillow fabric, or you can match them to the trim instead.
  8. Thread a long needle with a strong thread. Push it through the front of your pillow and out the back, leaving an 8 in (20 cm) tail. Thread the needle through your first button, then push it back through the pillow. Tie the ends of the thread into a tight knot. [28]
    • The tighter you tie the knot, the more tufted your pillow will look.
  9. Thread the second button onto the needle. Push the needle through the front of the pillow and out the back. Bring the needle through the first button. Push the needle through the back of the pillow and out the front. Bring it through the second button again, then tie it to the tail from before. Snip off the excess thread. [29]
    10. Advertisement

Community Q&A

Search
Add New Question
  • Question
    After I stuff the round pillow case, how do I finish sewing the opening so the stiches don't show?
    Community Answer
    A mattress stitch is useful for closing the pillow with an invisible seam. Stand it on end with your needle through one side of your seam. Go back and forth making a stitch on either side, gently pulling the thread tight between stitches. Close with a knot and press needle into the interior of the pillow, pushing it out further down the material. Pull all the way out, press pillow flat and trim thread so the end disappears into the finished pillow.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 4 Helpful 5
  • Question
    How do I add ruffles?
    Community Answer
    Buy or make a ruffle first. Pin it to the right side of your first circle, with the ruffled part facing in. Pin the second circle on top, right-side-down, then turn the pillow right-side-out. Stuff the pillow, the sew the gap shut using a ladder stitch.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 2
  • Question
    Where do I get good fabric?
    Community Answer
    Fabric stores like Joanne Fabrics and Hancock will have decent fabrics. Big box stores like Walmart and Hobby Lobby have a wide range of cheaper printed material. Also check your town for small privately owned fabric/crafting stores.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 2
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      • Go slowly on your machine and guide the circle into the foot. Push the needle down, lift the foot, and rotate the circle as needed. [30]
        Thanks
        Helpful 0 Not Helpful 0
      • If you plan on washing your pillow, wash, dry, and iron your fabric first.
        Thanks
        Helpful 0 Not Helpful 0
      • Upholstery fabric is great for throw pillows, while cotton or linen is better for sleeping pillows.
        Thanks
        Helpful 0 Not Helpful 0
      Show More Tips
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Things You'll Need

      Sewing a Simple Pillow

      Making a Chair Cushion

      • Fabric
      • White tailor's chalk or colored dressmaker's pen
      • Fabric scissors
      • Thread
      • Sewing pins
      • Sewing needle
      • Sewing machine
      • Polyester fiberfill
      • Bias tape (optional)

      Creating a Tufted Cushion

      • Fabric
      • White tailor's chalk or colored dressmaker's pen
      • Fabric scissors
      • Thread
      • Sewing pins
      • Sewing needle
      • Sewing machine
      • Polyester fiberfill
      • Cover button-making kit
      • Trim (optional)

      You Might Also Like

      How to
      Sew Bench Cushions
      How to
      Sew a Pillowcase for Beginners: An Easy DIY Project
      How to
      Make a No Sew Fleece Pillow
      How to
      Make a Bolster Pillow
      How to
      Make a Neck Pillow
      How to
      Make a CPAP Pillow
      How to
      Make a Papasan Chair Cushion
      How to
      Make a Ring Pillow
      Advertisement

      References

      1. ↑ https://youtu.be/fc5bBMpPs4c?t=73
      2. ↑ https://mypoppet.com.au/makes/diy-round-pillow-insert/
      3. ↑ https://eclectic-spark.com/2018/11/19/diy-round-decorative-pillow/
      4. ↑ https://youtu.be/fc5bBMpPs4c?t=103
      5. ↑ https://diyinpdx.com/2018/04/06/diy-round-pillow/
      6. ↑ https://mypoppet.com.au/makes/diy-round-pillow-insert/
      7. ↑ https://www.youtube.com/watch?v=0h27ZzDKAB0&feature=youtu.be&t=2m
      8. ↑ https://mypoppet.com.au/makes/diy-round-pillow-insert/
      9. ↑ https://mypoppet.com.au/makes/diy-round-pillow-insert/
      1. ↑ https://www.createcraftlove.com/simple-round-cushion-tutorial/
      2. ↑ https://www.createcraftlove.com/simple-round-cushion-tutorial/
      3. ↑ https://www.createcraftlove.com/simple-round-cushion-tutorial/
      4. ↑ https://youtu.be/epKuv9zmUoM?t=97
      5. ↑ https://www.createcraftlove.com/simple-round-cushion-tutorial/
      6. ↑ https://www.createcraftlove.com/simple-round-cushion-tutorial/
      7. ↑ https://www.createcraftlove.com/simple-round-cushion-tutorial/
      8. ↑ https://www.createcraftlove.com/simple-round-cushion-tutorial/
      9. ↑ https://www.youtube.com/watch?v=0h27ZzDKAB0&feature=youtu.be&t=2m
      10. ↑ https://www.createcraftlove.com/simple-round-cushion-tutorial/
      11. ↑ https://sewcanshe.com/2013-11-12-plump-tufted-pillows-tutorial-featuring-cuddle-fabric/
      12. ↑ https://sewcanshe.com/2013-11-12-plump-tufted-pillows-tutorial-featuring-cuddle-fabric/
      13. ↑ https://madamsew.com/blogs/sewing-blog/basting-technique-everything-you-need-to-know-about-basting-in-sewing
      14. ↑ https://sewcanshe.com/2013-11-12-plump-tufted-pillows-tutorial-featuring-cuddle-fabric/
      15. ↑ https://sewcanshe.com/2013-11-12-plump-tufted-pillows-tutorial-featuring-cuddle-fabric/
      16. ↑ https://sewcanshe.com/2013-11-12-plump-tufted-pillows-tutorial-featuring-cuddle-fabric/
      17. ↑ https://sewcanshe.com/2013-11-12-plump-tufted-pillows-tutorial-featuring-cuddle-fabric/
      18. ↑ https://sewcanshe.com/2013-11-12-plump-tufted-pillows-tutorial-featuring-cuddle-fabric/
      19. ↑ https://sewcanshe.com/2013-11-12-plump-tufted-pillows-tutorial-featuring-cuddle-fabric/
      20. ↑ https://sewcanshe.com/2013-11-12-plump-tufted-pillows-tutorial-featuring-cuddle-fabric/
      21. ↑ https://www.youtube.com/watch?v=0h27ZzDKAB0&feature=youtu.be&t=30s

      About This Article

      Article Summary X

      To sew a round pillow, cut 2 identical circles out of 2 pieces of fabric, and stack them on top of each other so the "wrong" side of the fabric, or the side that you don't want to show, is facing out. Pin the fabric together and sew around the circle along the pins, leaving a seam allowance of 1/2 inch. Be sure to leave a 4-6 inch gap where the circles aren't sewn together, and then cut notches around the seam allowance to prevent bunching. Finally, turn the fabric so that right side is facing out, and stuff it with filling before sewing the gap closed from the outside. For tips on making a chair cushion or tufted cushion, keep reading!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 143,824 times.

      Reader Success Stories

      • Mary Cecconi

        Jan 12, 2019

        "Easy to understand. Love the illustrations!"
      Share your story
      If you buy through links on our site, we may earn a commission .

      Did this article help you?

      Advertisement