Why Your Shark Steam Mop Isn’t Steaming (& How to Fix It)

PDF download Download Article
Troubleshooting tips for your Shark Steam Mop
PDF download Download Article

Shark Steam Mops are great for cleaning and sanitizing hard floors, but what if yours stops producing steam? Fortunately, this is a fairly common issue, and with a little troubleshooting, you may be able to fix it quickly. We’re sharing why your Shark Steam Mop may not be steaming and what you can do about it.

What to Do if Your Shark Steam Mop Isn’t Steaming

If your Shark Steam Mop isn’t steaming, start by checking that the mop is plugged in correctly. Also check whether the water tank is filled and installed properly, and whether the mop is set to Steam. If everything is set up correctly and the mop still isn’t steaming, try unclogging the nozzles with a paperclip.

Section 1 of 11:

Is the steam mop securely plugged in?

PDF download Download Article
  1. Check that the power cord for your Steam Mop is securely plugged into a working outlet. If the mop is getting power, the “Steam Control” button should blink, which indicates that the mop is in Standby mode. [1] Shark Steam Mops don’t have a power button, so your mop should automatically come on when you plug it in. [2]
    • How to fix it: If the mop is plugged in but it isn’t getting power, try plugging it into a different outlet. [3] If you’re sure the outlet is working, the power cord could be damaged—stop using the mop and contact Shark customer service.
    2. Advertisement
Section 2 of 11:

Does the tank have water in it?

PDF download Download Article
  1. If your Shark Steam Mop isn’t steaming, take a look at the water tank. It might seem obvious, but the mop can’t make steam if the tank is empty.
    • How to fix it: If there isn’t any water in the tank, unplug the mop, then carefully add water up to the Fill line. [4]
    • Do not refill the water tank while the mop is plugged in.
Section 3 of 11:

Did you wait 30 seconds for the mop to heat up?

PDF download Download Article
  1. Each time you plug in your Shark Steam Mop, it needs about 30 seconds to warm up before steam will start coming out. If it’s the first time you’re using the mop—or if you haven’t used it for a long time—it may take even longer than that for steam to build up. [5]
    • How to fix it: Try waiting longer than 30 seconds to see if the mop starts steaming.
    2. Advertisement
Section 4 of 11:

Are you using the correct steam setting?

PDF download Download Article
  1. After you plug in your Shark Steam Mop, check whether the Steam Control button is flashing. You’ll see this button on the front of the mop body. If it’s flashing, that means your mop is in Standby mode, so it won’t produce steam.
    • How to fix it: If your steam mop is in Standby mode, press the Steam Control button once to select the “Low Steam” setting or twice to select “High Steam.” [6]
    • On some models, like the Shark Klik n’ Flip, you may see 3 lights flashing in Standby mode. [7]
Section 5 of 11:

Did you prime the mop?

PDF download Download Article
  1. The Shark Steam Mop creates steam automatically as the handle moves while you’re mopping. If your mop isn’t making steam, you may need to prime it by pumping the handle several times before you start mopping. As you continue mopping, the back-and-forth motion should continue producing more steam.“ [8]
    • How to fix it: Pump the handle up and down about 10 times to prime the mop and release steam. [9]
    • It’s normal for the steam to be intermittent. If your steam mop has a “High Steam” setting, using this may give you more consistent steam. [10]
    2. Advertisement
Section 6 of 11:

Are you holding down the trigger as you mop?

PDF download Download Article
  1. Although the Shark Steam Mop uses the motion of the handle to create steam, you do need to hold down the trigger to release water. You don’t have to hold the button down continuously, but if you’re not seeing steam, you may not be holding it down long enough. [11]
    • How to fix it: Hold the trigger as you push the mop back and forth until you see steam forming.
    • If water saturates the floor and there’s no steam building up, contact Shark customer service.
Section 7 of 11:

Is the water tank placed properly?

PDF download Download Article
  1. If the tank isn’t lined up correctly, water might not be able to travel through the mop. Visually inspect the tank to see if it’s correctly placed in the body of the mop. Also try to wiggle it—it should be seated firmly, so there shouldn’t be much movement. [12]
    • How to fix it: Unplug the mop, then remove the water tank. Replace it with the cap facing down, then slide it into place on the mop until you hear a click.
    2. Advertisement
Section 8 of 11:

Is the water tank cracked or otherwise damaged?

PDF download Download Article
  1. With the mop unit unplugged, remove the water tank and check it carefully—if it’s cracked, water may be leaking out before it can get into the mop. Also, press down on the center of the cap to test whether water is coming out of the tank. [13]
    • How to fix it: If the tank is damaged or if water isn’t coming out, stop using the mop and contact Shark customer service.
Section 9 of 11:

Is the nozzle on the bottom of the mop clogged?

PDF download Download Article
  1. If everything else on your Shark Steam Mop seems to be working but it still isn’t making steam, the issue could be a clogged nozzle. Calcium and minerals from tap water can build up inside the nozzle, creating a blockage. [14]
    • How to fix it: Unplug the mop, then insert a Shark nozzle cleaning tool or paperclip into the nozzles on the bottom of the mop head. Wiggle the cleaning tool or paperclip back and forth a few times to dislodge any debris, then try the mop again.
    • If you’ve been using the mop, be sure to let it cool completely so you don’t burn yourself.
    2. Advertisement
Section 10 of 11:

When should I call a professional?

PDF download Download Article
  1. Call Shark customer service if the steps above didn’t work. If you’ve tried to fix your Shark steam mop yourself but it still isn’t working, stop using the mop and reach out to Shark customer service by calling the number in your owner’s manual. [15] Don’t try to take the steam mop apart on your own—if it’s not put back together properly, it could be an electrical hazard. [16]
    • Taking apart your steam mop can also void the warranty.
    • If customer service can’t help you troubleshoot the mop, have it examined by a qualified appliance technician or replace the mop.
Section 11 of 11:

How do I maintain a shark steam mop?

PDF download Download Article
  1. 1
    Use distilled water to avoid blockages. If you use tap water in your Shark Steam Mop, calcium and minerals can build up, blocking the jets and eventually damaging the inner mechanisms of the mop. Using distilled or filtered water can help prevent this, prolonging the life of your mop. [17]
    • Mineral deposits are especially a problem if you live somewhere with hard water. [18]
  2. 2
    Do not use vinegar or cleaning products in your Shark Steam Mop. Vinegar, oils, fragrances, and cleaning products can all damage your steam mop if you add them to your water tank. This can make the mop unsafe to use. [19]
    • Only use plain water in your Shark Steam Mop.
    • If you want to use a cleaner on your floor, spray it on the floor first, then go over the area with your steam mop.
  3. 3
    Remove the pad before you store your steam mop. Leaving the wet pad on the mop could damage your floors. When you’re finished cleaning, unplug the mop and let it cool, then carefully remove the cleaning pad. [20]
  4. 4
    Only use liquid detergent on your mop pads. To prolong the life of your Shark mop pads, machine-wash them in warm water with liquid laundry detergent. Powdered detergent and fabric softener can leave residue that can cause your mop heads to clean less effectively, and harsh cleaners like bleach can damage the fabric. [21]
    • Because the mop pads wear out over time, Shark recommends replacing them every 3–4 months.
    • If you see loose threads on your Shark mop pads, carefully snip them away with scissors. Don’t pull them or you can unravel the mop head.
    5. Advertisement

Expert Q&A

Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!

      Warnings

      Advertisement

      You Might Also Like

      How to
      Clean off Melted Aluminum Foil in the Oven
      12 Ways to Clean Your Iron’s Soleplate, Reservoir & Steam Holes
      How to
      Clean a Vicks Humidifier
      How to
      Whiten Yellowed Plastic on Home Appliances
      How to
      Clean a Sticky Iron with Household Products
      How to
      Clean an Iron with Vinegar
      How to
      Clean a Steam Iron and Its Base Plate
      The Best Way to Clean a Teflon Iron
      How to
      Clean Artisan Hien
      How to
      Get Rid of Dishwasher Smells (And What's Causing Them)
      Advertisement

      References

      1. ↑ https://support.sharkclean.co.uk/hc/en-gb/articles/360019141860-S6005UK-Shark-Floor-and-Handheld-Steam-Cleaner-Troubleshooting-Guide
      2. ↑ https://www.manua.ls/shark/slim-steam-s3455/manual?p=4
      3. ↑ https://www.manua.ls/shark/slim-steam-s3455/manual?p=14
      4. ↑ https://support.sharkclean.co.uk/hc/en-gb/articles/360019141860-S6005UK-Shark-Floor-and-Handheld-Steam-Cleaner-Troubleshooting-Guide
      5. ↑ https://www.manua.ls/shark/slim-steam-s3455/manual?p=9
      6. ↑ https://www.manua.ls/shark/slim-steam-s3455/manual?p=10
      7. ↑ https://documents.4rgos.it/v1/static/7099416_R_D001
      8. ↑ https://www.manua.ls/shark/s1000/manual?p=6
      9. ↑ https://sharkcleanapac.zendesk.com/hc/en-au/articles/5382789662095-Troubleshooting
      1. ↑ https://sharkcleanapac.zendesk.com/hc/en-au/articles/5523929556751-Troubleshooting
      2. ↑ https://support.sharkclean.co.uk/hc/en-gb/articles/360019141860-S6005UK-Shark-Floor-and-Handheld-Steam-Cleaner-Troubleshooting-Guide
      3. ↑ https://www.manua.ls/shark/s1000/manual?p=5
      4. ↑ https://support.sharkclean.com/hc/en-us/articles/10108837191068-S1000-Series-Shark-Steam-Mop-Troubleshooting-Guide
      5. ↑ https://www.manua.ls/shark/slim-steam-s3455/manual?p=13
      6. ↑ https://sharkcleanapac.zendesk.com/hc/en-au/articles/5523929556751-Troubleshooting
      7. ↑ https://www.manua.ls/shark/slim-steam-s3455/manual?p=2
      8. ↑ https://support.sharkclean.ca/hc/en-us/articles/4403096437138-S1000-Shark-Steam-Mop-FAQs
      9. ↑ https://www.manua.ls/shark/slim-steam-s3455/manual?p=3
      10. ↑ https://www.manua.ls/shark/s1000/manual?p=3
      11. ↑ https://www.manua.ls/shark/s1000/manual?p=8
      12. ↑ https://www.manua.ls/shark/s1000/manual?p=7
      13. ↑ https://www.manua.ls/shark/slim-steam-s3455/manual?p=2
      14. ↑ https://www.manua.ls/shark/slim-steam-s3455/manual?p=2

      About This Article

      Did this article help you?

      Advertisement