How to Shorten Shoe Laces

PDF download Download Article
PDF download Download Article

Have you ever bought a new pair of shoes only to discover that the laces are too long? Not only can you wind up stepping on them and causing damage, you might stumble over the extra length and hurt yourself. But that doesn't mean you have to go out and buy a brand new pair of laces. With a few simple items from around the house, you can easily shorten your laces, and put any worries about tripping out of your mind.

Part 1
Part 1 of 3:

Measuring and Cutting

PDF download Download Article
  1. While you can eyeball how much of the laces you want to cut off, it’s usually best to try on your shoes to see how much excess lace there is on each side. Tie your shoes as you normally would for the most comfortable fit, and take note of how long the laces are so you can decide how much you want to remove. [1]
    • When you’re trying to decide how much of the laces that you want to cut, think about how you prefer to tie your shoes. If you don’t want to double knot the laces, tie them normally and see how much of the length you’ll need to take off on each side.
  2. You’ll need to know exactly where to cut the laces, so it helps to mark them at the right spot. Use a felt tip pen to draw lines on each end of the laces to indicate the excess that you want to remove. [2]
    • You can leave your shoes on when you mark the laces, but it’s often easier to use a ruler to determine how many inches you want to remove from each end with the shoes on and then remove the laces to mark them.
    • Shoelaces come in standard sizes, such as 30-, 40-, or 54-inches, so once you figure out how much excess there usually is on your shoes, you’ll know where to mark laces of the same length in the future.
    Advertisement
  3. They’re usually fairly easy to cut, so any household scissors should do the trick. However, you’ll want to make sure that it’s a sharp pair to minimize fraying when you cut the laces. Follow the marks that you made to ensure that you cut at the right spot. [3]
    • Don’t cut all of the excess off one end of the lace. You’ll wind up with one finished end and one unfinished end, so they won’t match when you relace your shoes.
  4. Instead of trimming the excess from each end of the lace and having to finish the ends, you can opt to take out the extra length from the center. You'll wind up with two pieces that each have an aglet at one end, so you only have to tie them together to create a single lace. [4]
    • Try on the shoes, use a ruler to see how much extra there is on each side, add the numbers together, and cut that amount for the middle of the lace.
    • Tie the pieces of the lace together as tightly as possible, and secure it further by applying a small amount of instant glue to the knot and allowing it to dry. If there is any excess lace outside the knot, make sure to trim it away. You can also sew the two pieces together.
    5. Advertisement
Part 2
Part 2 of 3:

Finishing the Ends

PDF download Download Article
  1. Lay a piece of adhesive tape sticky side on a flat surface, and place the lace towards the center. Take your time rolling the tape tightly around the lace to form a sturdy, finished tip, also known as the aglet. If there is any excess lace protruding past the tape, trim it with scissors. [5]
    • To make the tip extra sturdy, you can place a couple of dots of glue beneath the end of the tape before you seal it over the lace.
    • Finishing the ends with adhesive tape usually creates a tip that resembles plastic aglets on store bought laces well enough that you can get away with cutting the excess length off only one end of the lace if you prefer.
  2. Cover the tips of the laces with a small amount of glue, and as it starts to dry, press on the glue to help it absorb into the lace and reduce the thickness. Once the glue is completely dry, you can trim off any excess and apply another thin coat to increase the aglet’s durability and give it a smoother look. [6]
    • Don’t use “instant glue”, such as Krazy Glue, because it will bond with your skin, making it impossible to shape the end of the lace.
    • The best type of glue to use is one with an acetone-based solvent, such as Elmer’s Clear Household Cement or Tarzan’s Grip. They dry clear, and are waterproof, so they form ideal aglets.
    • If you don’t have any glue on hand, you can use clear nail polish in its place.
  3. Usually used to insulate electrical joints, the tubing is strong and flexible enough to work as effective aglets. You’ll need to cut the tubing lengthwise to match the size of most aglets, which is typically about a ½ inch. Slip a section over each end of the lace, and then hold the tubing over a candle, lighter, or other flame so the material can contract. [7]
    • Choose a diameter of tubing that will slip over the end of your laces. In most cases, 4 to 5 millimeter is a good fit.
    • When you’re placing the tubing over the ends of the lace, it often helps to twist it into place so you don’t wind up fraying the lace.
    • It doesn’t take much heat to shrink the tubing, so make sure to hold it a far enough distance from your flame. If it starts to smoke or bubble, it’s too hot.
    • If you have a small, travel-size hair straightening iron, you can use that to safely heat the tubing. Gently clamp it over the end for five to ten seconds to shrink the tubing and finish the laces.
    • Clear heat shrink tubing will provide the most similar look to factory-made aglets.
  4. If your laces are made of a synthetic material, you can actually melt the material itself to create a smooth, finished tip. Hold the end of the lace over a candle, match, lighter, or other flame to melt the material just enough to form a sealed edge. [8]
    • Make sure not to hold the lace too close to the flame, or you may light the entire lace on fire. It’s best to melt the lace over a sink in case a fire does occur.
    • Don’t touch the synthetic material of the lace once it starts to melt because it may stick to your skin.
    5. Advertisement
Part 3
Part 3 of 3:

Tying Your Shoes

PDF download Download Article
  1. When you’re lacing your shoes, you should always begin with the eyelets closest to the toes. That allows you to pull the laces from one set of eyelets at a time to tighten them and provide the most comfortable fit. Push the tips of the laces through the pair of eyelets and adjust until the length is equal on both sides. [9]
    • Whatever method you use to finish the ends of your shortened laces, make sure you’ve give them proper time to dry or cool before lacing your shoes.
    • Many shoes features two rows of parallel eyelets, with one set closer to the shoe’s tongue and one further. For wide feet, use the eyelets closest to the tongue to provide more space for the foot. If you have narrow feet, lace the shoes through the eyelets furthest away from the tongue to bring up the shoe for a closer fit.
  2. While you can lace your shoes in a variety of ways, crisscrossing the laces over one another works well for most people. Once you’ve threaded the lace through the bottom eyelets, pull the right side across to place it through the next highest eyelet on the left side and do the same to the left to the right. Continue alternating all the way until the final set of eyelets. [10]
    • Crisscrossing your laces usually provides the most comfort because the shoelace crossover happens in the space between the two sides of the shoe, so they aren’t pressed against your foot.
  3. You should do it as normally would, but because you’ve shortened the lace, you shouldn’t need to double knot or tie the lace. When it’s knotted, you’ll be able to tell if you’ve trimmed it sufficiently. [11]
    • If you haven’t cut enough of the lace off, trim a little bit more and repeat the steps for finishing the tips.
    4. Advertisement

Community Q&A

Search
Add New Question
  • Question
    How can I tie long laces without having to shorten them
    Community Answer
    You can fold the laces in half and tie them like you would with full length ones and then continue from there.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 23 Helpful 35
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      • Get creative when you’re using adhesive tape or heat shrink tubing to create aglets for your laces. They both come in a variety of shades, so you can create custom lace tips to celebrate your school, team, or favorite colors.
        Thanks
        Helpful 2 Not Helpful 0
      • If you are worried about burning your fingertips when using a flame to seal the lace tips, gardening gloves or something similar allow enough dexterity for you to shape the ends safely. They’ll also help keep your skin safe if you’re using glue to finish the aglets.
        Thanks
        Helpful 0 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • If you’re using a flame to help finish the ends of your shortened laces, always have a fire extinguisher on hand. It’s easy for flames to get out of hand quickly.
        Thanks
        Helpful 1 Not Helpful 15
      Advertisement

      Things You'll Need

      • Shoes
      • Laces
      • Scissors
      • Felt tip marker
      • Adhesive tape
      • Glue with acetone-based solvent or clear nail polish
      • Heat shrink tubing
      • Lighter, candle, or match

      You Might Also Like

      How to
      Untie Shoelace or String Knots
      How to
      Clean Your Shoelaces
      How to
      Lace Shoes
      The 4 Easiest Ways to Tie Shoelaces
      How to
      Hide Shoelaces
      The Best Ways to Lace Up Your On Cloud Shoes
      How to
      Lace Timberlands
      The Best Ways to Tie Your Converse Sneakers
      How to
      Straight Lace Shoes
      How to
      Tie Laces in a Double Knot
      How to
      Lace Boots
      How to
      Tie Moccasins
      How to
      Tighten Hey Dude Shoes
      An Easy Guide to Lacing Vans: Old Skools, High Tops, & More
      Advertisement

      References

      1. ↑ https://www.youtube.com/watch?v=JWGnrErpLPY
      2. ↑ https://www.youtube.com/watch?v=p1bT5IP8Ekk
      3. ↑ https://www.youtube.com/watch?v=p1bT5IP8Ekk
      4. ↑ https://www.youtube.com/watch?v=S5-S4UgY4y0
      5. ↑ https://www.youtube.com/watch?v=DBzZ4UHBCYk
      6. ↑ https://www.youtube.com/watch?v=73ejpLwGx0c
      7. ↑ https://www.youtube.com/watch?v=pijf6aFsYLM
      8. ↑ https://www.youtube.com/watch?v=pijf6aFsYLM
      9. ↑ https://orthoinfo.aaos.org/en/staying-healthy/athletic-shoes/
      1. ↑ https://orthoinfo.aaos.org/en/staying-healthy/athletic-shoes/
      2. ↑ https://www.youtube.com/watch?v=DAnom5A-xbU

      About This Article

      Article Summary X

      To shorten shoelaces, first tie the shoes as you would normally, measure how much excess there is, and mark the spot to know where to cut. Then, cut the laces using a pair of sharp scissors to minimize fraying. Make sure to cut the extra material off both ends of the laces for matching unfinished ends. After you cut the laces, wrap adhesive tape tightly around the ends of the laces to create an aglet. Finally, apply glue to the tips of the laces to give them a smoother look and to increase the durability of the new aglets. If you want to learn how to protect the ends of your laces with heat shrink tubing, keep reading the article!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 327,501 times.

      Reader Success Stories

      • Sashulya Soso

        Oct 15, 2016

        "This really helped. Very easy to follow steps. Thanks."
      Share your story

      Did this article help you?

      Advertisement