How to Size a Radiator

PDF download Download Article
PDF download Download Article

Radiator sizing requires a calculation of your heating needs. The heat needed from a radiator changes depending on your room. Measure out your room. Larger rooms need more heat and some features, such as outside walls, cause heat loss. Use a calculator to determine your exact needs. Figure out how much space you have available for a radiator. Once you know what you need, you’ll be able to find a radiator that’s right for you.

Part 1
Part 1 of 3:

Measuring a Room’s Heat Need

PDF download Download Article
  1. Plenty of websites have calculators to help you figure out your heat need. Search for a radiator sizing calculator. Most of them can do the math in both feet and meters. You’ll need to know your room dimensions as well as its features, such as the type of windows and insulation.
    • These calculators use the same math you can do by hand. They’re good for saving time or checking your calculations.
  2. Get a tape measure if you don’t already know the dimensions of the room. Measure the length, width, and height of the room. Write down the measurements so you don’t forget them. [1]
    Advertisement
  3. Multiply together the length, width, and height of the room. This gives you the cubic volume of the room. For example, a room 13 feet (4 m) wide, 12 feet (3.7 m) long, and nine feet high has a cubic volume of 1,404 cubic feet. [2]
    • You can measure your room in either feet or meters.
  4. Multiplying by a room factor is the easiest way to estimate the heat needed for a type of room. For lounges, living rooms, and dining rooms, multiply the cubic volume by five. For bedrooms, multiply by four. For common areas and kitchens, multiply by three. This gives you the needed radiator output in BTUs. [3]
    • When measuring in meters, you can multiply the cubic volume by 153. This gives you a general idea of the heat you need for any room. [4]
    • For example, a 1,404 cubic foot living room requires about 7020 BTUs.
  5. Some rooms hold more heat than others. For rooms facing north, add 10% to the BTU score. For rooms with French windows, add 20%. Subtract 20% for foam-filled cavity walls and 5% for double glazed windows. Continue making adjustments until you have an estimate for the number of BTUs your room needs. [5]
    • There are plenty of other factors that determine heat loss and retention. For example, outside walls raise the BTUs needed by 15-40%. Having a bedroom above the room lowers the score by 15%.
  6. To figure out how big a boiler you need, you have to calculate the BTU requirement of every room. Follow the same steps you used for the first room. Total all the BTU measurements together. This number is the amount of BTUs the boiler needs to put out to heat your home. [6]
    • Add 20% to the BTU total to account for a hot water circulating tank. Add on 10% to account for heat loss.
  7. Divide your final BTU measurement by 3.41. The heating power of radiators is often calculated in watts. Keep both numbers on hand in case you need them while picking out a radiator. [7]
  8. When in doubt, it’s always best to get the opinion of a heating expert. They’ll be able to figure out your heating needs for you. In addition, they can help you change your heating system.
    • Since water is used in radiators, some plumbers may also be able to do this.
    9. Advertisement
Part 2
Part 2 of 3:

Sizing a Radiator for Wall Space

PDF download Download Article
  1. The radiator you choose has to pump out enough heat to warm the room. Think about the kind of climate you live in. For a climate with frigid winters, such as the area in the US from New England to the upper Midwest, your radiator needs to put out 40 BTU per square foot of floor area.
    • To figure out the floor area, multiply the floor length by its width. For example, a room 25 feet (7.6 m) long and 20 feet (6.1 m) wide has an area of 500 square feet.
    • You can convert meters to feet by multiplying the number of meters by 3.28.
  2. Pick a spot on the wall for the radiator. Take your tape measure and measure out the length and width of this area. Write it down so you can use it for later. Remember, more space means larger radiators, and larger radiators can give off more heat.
  3. Find your BTU per hour measurement from earlier. Divide it by the length of your wall space. If you are looking for a vertical radiator, divide the BTU per hour number by the height of the wall space. This gives you the BTU output you need per foot for every hour.
    • Horizontal radiators are measured by length. Vertical radiators are measured by height.
  4. Check the packaging of a radiator before you buy it. It’ll say how much heat the radiator creates. Try to match the BTU measurement you came up with in the last step. Most likely, you’ll have to choose one within 10% of your heating needs.
    • A stronger radiator can be turned down, but a weaker radiator cannot give off more heat.
    5. Advertisement
Part 3
Part 3 of 3:

Picking a Radiator

PDF download Download Article
  1. Available space matters when picking a radiator. A double panel radiator gives off more heat than a single panel radiator of the same size. Switch to a double panel option when you need a stronger radiator. [8]
    • For example, a single panel radiator 20 inches (50.8 cm) (about 500 mm) long and 20 inches (50.8 cm) wide puts out 1333 BTUs of heat. A double panel radiator the same size puts out 2597 BTUs of heat.
  2. Room greater than 18 feet (5.5 m) (six meters) long on any side are tough to heat. Larger rooms benefit when you make space for two or more radiators. Adding a second radiator splits the heat output needed from one radiator in half. This means you can keep smaller radiators that will maintain an even temperature throughout the room. [9]
    • The radiators should be placed on opposite sides of the room. This way, they heat the room evenly.
  3. Iron radiators aren’t in wide production, but some companies still offer them. In addition to their old-school appeal, iron radiators heat and cool slowly. Modern panel radiators tend to be all hot or all cold, which can be uncomfortable. Iron radiators are often found in older homes.
    • Hot water iron radiators give off 170 BTUs per hour per square feet. Steam iron radiators give off 240 BTUs per hour per square feet.
    4. Advertisement

Community Q&A

Search
Add New Question
  • Question
    How do I measure a radiator?
    Community Answer
    You will measure the core of the radiator only. When doing this, make sure the radiator is in the upright position.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 9 Helpful 1
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!

      Things You’ll Need

      • Tape measure
      • Calculator

      You Might Also Like

      How to
      Tell if Your Car's Thermostat Is Stuck Closed
      How to
      Flush a Car's Radiator Coolant System
      How to
      Seal a Leaking Radiator
      How to
      Fix a Water Pump in a Vehicle
      How to
      Identify a Failing Radiator in Your Car
      How to
      Cool an Overheated Engine
      How to
      Change a Car Radiator
      How to
      Install a Coolant Flush Kit
      How to
      Stop an Engine from Overheating
      How to
      Tell if a Car's Water Pump Needs Replacement
      How to
      Replace a Leaking Radiator Hose
      How to
      Inspect Car Radiator Hoses
      Advertisement

      Expert Interview

      Thanks for reading our article! If you’d like to learn more about car maintenance and repair, check out our in-depth interview with Hovig Manouchekian .

      References

      1. ↑ http://www.directheatingsupplies.co.uk/news/btu-calculator-how-to-work-out-what-radiator-you-need/
      2. ↑ https://www.weekand.com/home-garden/article/size-radiators-rooms-18031695.phpl
      3. ↑ http://www.diydoctor.org.uk/projects/rads.htm
      4. ↑ http://www.directheatingsupplies.co.uk/news/btu-calculator-how-to-work-out-what-radiator-you-need/
      5. ↑ http://www.directheatingsupplies.co.uk/news/btu-calculator-how-to-work-out-what-radiator-you-need/
      6. ↑ https://www.bobvila.com/articles/how-to-choose-a-new-boiler/
      7. ↑ https://www.weekand.com/home-garden/article/size-radiators-rooms-18031695.php
      8. ↑ http://www.directheatingsupplies.co.uk/news/btu-calculator-how-to-work-out-what-radiator-you-need/
      9. ↑ http://www.diydoctor.org.uk/projects/rads.htm

      About This Article

      Article Summary X

      Sizing a radiator is easy once you know the dimensions of the room. If you don’t already know the dimensions of the room, use a tape measure to record the length, width, and height. Once you have these measurements, search for a radiator sizing calculator online, which will calculate how many BTUs of heat you need. There are some heat adjustments you’ll want to make before picking a radiator. For instance, if you have foam-filled cavity walls, you’ll need less heat. Or if you have French windows, you’ll probably need a bit more heat. After figuring out which size radiator you need for each room, combine these to come up with a boiler size. The boiler should have enough BTUs to cover each room in your home. When in doubt, you can always call a heat expert for help. To learn how to choose the right radiator for your home, read on!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 93,187 times.

      Did this article help you?

      Advertisement