Download Article
Download Article
Soldering is the process of heating metals and permanently binding them through the use of an added solder. Whether you need to use this technique for jewelry making or a number of other household projects, soldering jump rings is a common technique for do-it-yourself enthusiasts. Read the following article to learn how to solder jump rings for your at-home projects.
Steps
Download Article
-
Select extra-easy solder temperament. -
There is only one temperament of solder that requires a lower heat (called low-temperature solder). Jump rings, therefore, do not require a solder that melts at a very high temperature.- Cut extra-easy solder into very small chips using tin snips that do not exceed .03 inch (1 mm) squares.
Advertisement -
Place all cut solder into a designated container and do not confuse or mix it with other varieties of solder. -
Open the jump ring with a set of pliers using needle-nose pliers if the ring is small. [1] X Research source -
Apply flux to both ends of the opened jump rings with a small, fine paintbrush.- Flux is an agent that assists the solder in flowing into the joint. Flux comes in a variety of forms, but one common form is borax.
-
Close the jump ring with the pliers ensuring that the two ends of the jump ring are flush against one another. [2] X Research source -
Place your jump ring on a charcoal block. [3] X Research source- Before soldering jump rings, the joint should be touching the block.
-
Pick up one extra-easy solder chip with the tip of the small, fine paintbrush. [4] X Research source -
Place the solder chip on the joint. [5] X Research source -
Turn on your soldering torch. -
Heat the jump ring as well the charcoal block and do not directly heat the solder. [6] X Research source- When you solder metal jump rings, the solder will flow to the hottest place.
-
Watch for the solder to melt.- The solder will have a liquid appearance at this stage.
-
Watch for the solder to flow. -
This entire process will happen very quickly. Immediately remove the heat. -
Place the jump ring into a pickle solution. [7] X Research source- A pickle is a solution that removes a layer of oxidation on the soldered metal.
-
Wait until you have soldered all jump rings, as they can all be added into the pickle at the same time. -
Remove the jump ring(s) from the pickle solution using copper tongs. -
Rinse the jump rings with water. -
Repeat the process on all jump rings requiring soldering.
Advertisement
Community Q&A
Search
-
QuestionCan I use a soldering iron instead?T. ChinsenTop AnswererAs long as the temperature of the soldering iron can reach the temperature of the solder, it can be used to solder the ring. Keep in mind that the metal also has to absorb enough heat to melt the solder. The solder torch provides a burst of high heat, while an iron gives a slower rate of heat on its tip.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
- Fusing of metal jump rings is not necessarily as strong as the bond of metals fused by a solder that melts at a higher temperature.Thanks
- The color of hard solder most closely matches silver. Extra-easy solder does not perfectly match that of silver, but it is much easier to work with.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Warnings
- Don't use a pickle solution on silver-plated items as the solution can actually remove a layer of silver, exposing the base metal.Thanks
- Don't apply an overabundance of flux into the jump ring joint. When you solder jump rings, you apply a flame, and the flux can bubble up from the heat. This can displace the solder chip.Thanks
Advertisement
Things You'll Need
- Extra-easy solder
- Tin snips
- Pliers (needle nose pliers, if necessary)
- Flux
- Small, fine paintbrush
- Charcoal block
- Soldering iron
- Jump rings
- Pickle
- Copper tongs
- Water
References
- ↑ https://www.youtube.com/watch?v=_Gf3aM6Wz3g
- ↑ https://www.youtube.com/watch?v=y6nQ92aKxeo
- ↑ https://www.youtube.com/watch?v=_qfbCNjtxNI
- ↑ https://www.youtube.com/watch?v=_Gf3aM6Wz3g
- ↑ https://www.youtube.com/watch?v=KeTxwCs8Fg0
- ↑ https://www.youtube.com/watch?v=KeTxwCs8Fg0
- ↑ https://www.youtube.com/watch?v=_qfbCNjtxNI
- http://www.stellaceleste.com/htm/soldering/soldering.htm
About This Article
Thanks to all authors for creating a page that has been read 103,508 times.
Reader Success Stories
- "I have just really enjoyed reading all those details. Thank you so much!"
Advertisement
95%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
"I have just really enjoyed reading all those details. Thank you so much!"
