3 Ways to Splice a Rope Together

PDF download Download Article
Three simple and easy ways to weave the ends of a rope together
PDF download Download Article

“Splicing” is the process of weaving the ends of a length of rope into the body of the rope itself, or into another rope. It’s handy in boating or other outdoor activities to make secure loops, prevent the ends of rope from fraying, or even joining 2 lengths of rope to make a longer length. We’ll show you easy ways to do all three with an eye splice, end splice, and short splice.

Method 1
Method 1 of 3:

Eye Splice

PDF download Download Article
  1. Watermark wikiHow to Splice Rope
    Start by taking the end of 1 strand and unraveling it about 5 revolutions down the rope—take the end of a strand and rotate it around the others 5 full times. [1] You may need to cut the end of your rope free to separate it, if it’s bound by adhesive or melted together.
    • If you’re using a rope with more than 3 strands, unravel them, then gather them as evenly as possible into 3 groups, making essentially a 3-strand rope.
    • Eye splices are useful for making a stable loop in a line of rope. This can be useful for towing, pulling, hanging, or pulleys.
  2. Watermark wikiHow to Splice Rope
    Wrap electrical tape (or another sturdy kind of tape) once or twice around the end of each strand, as well as where the strands meet. [2] This prevents your rope from fraying while working on it, and from unraveling any further.
    • Or, seal the ends of synthetic rope by singing the fibers together with a lighter. Hold the flame to the very end of each strand for a few seconds until the fibers fuse together.
    • Always exercise caution when working with fire. If your rope has soaked up a flammable substance, it could catch fire easily.
    • Or, use a rope-safe glue to attach the end strands of a natural fiber rope together to prevent further fraying.
    Advertisement
  3. Watermark wikiHow to Splice Rope
    Bring the point of the rope where the unraveled strands meet back up to the main body of the rope where you want your splice tied. This establishes the size of your loop. [3]
    • Mark this point on the rope with a marker to help you remember where it is.
    • Keep in mind what you want to use the spliced rope for—a big loop may work well for some jobs, but may not be ideal for others.
  4. Watermark wikiHow to Splice Rope
    Loosen the point on the body of your rope that’ll form the base of the loop by twisting it against the rotation of the rope. Then, feed 1 end strand under and through the loosened, untwisted strand nearest you, and pull the end strand through. [4]
    • As you pull the end strand through, position the 2 other end strands so that they “straddle” or fall on either side of the rope.
  5. Watermark wikiHow to Splice Rope
    Take the next end strand that’s clockwise around the end of the rope. Position it so that it travels over the loosened body strand through which you fed the first end strand, then feed it under and through the very next loosened strand. [5]
  6. Watermark wikiHow to Splice Rope
    Now take the last end strand and feed it through the third loosened body strand—the one which you haven’t yet pulled a strand through. Pull it all the way through, just like the other 2 end strands.
    • Make sure all 3 end strands are pulled all the way through, so that the base of the loosened strands are firmly up against the body of the rope.
  7. Watermark wikiHow to Splice Rope
    Take the first strand you tucked and move it over the next strand on the body of the rope, then tuck it under and through the strand after that. Do the same with the other 2 end strands, repeating your way around the rope. [6]
    • Keep working until all 3 end strands are completely tucked into the body of the rope, weaving them over and under one at a time.
    • As you work, continue to twist the rope to loosen its body, and pull each strand all the way through so that the strands are sturdy and secure.
    • Weave the ends until each has been tucked into the body at least 5 times, or until you cannot tuck them any further.
    8. Advertisement
Method 2
Method 2 of 3:

Back Splice

PDF download Download Article
  1. Watermark wikiHow to Splice Rope
    Untwist the very end of your rope until you have 3 separate strands that are each about 2–3 inches (5.1–7.6 cm) long. [7] Cut the end of your rope free to separate it if it’s held together with adhesive or melted together.
    • Thicker ropes are easier to back splice if you unravel an additional 2–3 inches (5.1–7.6 cm).
    • If you’re using a rope with more than 3 strands, unravel them, then gather them as evenly as possible into 3 groups, making essentially a 3-strand rope.
    • A back splice is especially useful for preventing a rope that has become unraveled from fraying. This splice will securely keep the rope together.
  2. Watermark wikiHow to Splice Rope
    Wrap sturdy tape, like electrical tape , once or twice around the end of each strand of the rope. [8] This prevents your rope from fraying while working on it.
    • Or, seal the ends of synthetic rope by singing the fibers together with a lighter. Hold the flame to the very end of each strand for a few seconds until the fibers fuse together.
    • Pinch the base of the strands with your fingers to keep them from unraveling further.
  3. Watermark wikiHow to Splice Rope
    Hold the end of the rope so that one strand is distinctly in the center. Take the end of this center strand and fold the tip toward you, between the other 2 strands, and hold the tip at the base of the strands with your finger to form a loop. [9]
    • This is the beginning of a crown knot, which will form the base for your end splice.
  4. Watermark wikiHow to Splice Rope
    Take the rightmost strand and pass it through the center loop, keeping all the strands loose. [10]
    • Don’t feed the right strand all the way through the center loop; keep it loose enough so that it forms its own loop.
  5. Watermark wikiHow to Splice Rope
    Take your final strand on the left and pass it over your first loop and through your second loop. [11] The current shape of your end strands will roughly resemble a propeller or pinwheel.
  6. Watermark wikiHow to Splice Rope
    Pull the ends of each strand with steady pressure to make a secure “crown knot” at the end of your rope. [12]
    • With coarse ropes, you may need to use your fingers to encourage the rope into place. It sometimes helps to pinch the bottom of the crown knot and pull it tightly.
  7. Watermark wikiHow to Splice Rope
    Untwist the rope to loosen the portion just beneath the crown knot. Then take any one of your end strands and pass it over the nearest strand in the body of the rope, then under and through the next body strand. [13]
    • After, pull the end of the strand through the loosened strands until no slack remains.
  8. Watermark wikiHow to Splice Rope
    Take the strand to the right of the one you just tucked. Bring the end of that strand over the body strand under which you tucked the first. Then, tuck this second strand under and through the next strand in the body. [14]
    • Remember to pull the strand all the way through!
  9. Watermark wikiHow to Splice Rope
    Just as you did with the first 2 strands, weave the third and final end strand over the nearest body strand, then under and through the next, pulling it all the way through. [15]
  10. Watermark wikiHow to Splice Rope
    Working one strand and one tuck at a time, select any end strand and weave over, then under and through the body strands of the rope. [16] Then do another single tuck on the next strand, and so on, until the entire length of each strand is tucked into the rope.
    • Depending on the length of your end strands, you may have to continue this pattern for several twists in the rope until the full length of your end strands is spliced.
    • Pull on the ends of your rope firmly until the weave is solid. Further tighten your spliced rope by rolling it in your hands, feeling the rope squeeze and settle as you do so.
    • Your end-spliced rope is now ready to use!
    11. Advertisement
Method 3
Method 3 of 3:

Short Splice

PDF download Download Article
  1. Watermark wikiHow to Splice Rope
    Untwist the very end of your ropes until you have 3 separate strands (on each rope) that are each about 6 inches (15 cm) long. [17] If your ropes are held together with adhesive or are melted together, cut the ends of your ropes free to separate them.
    • If you’re using a rope with more than 3 strands, unravel them, then gather them as evenly as possible into 3 groups, making essentially a 3-strand rope.
    • A short splice is great for joining the ends of 2 different ropes, making for a longer length of rope.
    • That said, avoid using short-spliced ropes as load-bearing ropes. They’re plenty sturdy, but not as ideal as a fully intact rope.
  2. {"smallUrl":"https:\/\/www.wikihow.com\/images\/thumb\/8\/81\/Splice-Rope-Step-19-Version-2.jpg\/v4-460px-Splice-Rope-Step-19-Version-2.jpg","bigUrl":"\/images\/thumb\/8\/81\/Splice-Rope-Step-19-Version-2.jpg\/v4-728px-Splice-Rope-Step-19-Version-2.jpg","smallWidth":460,"smallHeight":259,"bigWidth":728,"bigHeight":410,"licensing":"<div class=\"mw-parser-output\"><p>\u00a9 2024 wikiHow, Inc. All rights reserved. wikiHow, Inc. is the copyright holder of this image under U.S. and international copyright laws. This image is <b>not<\/b> licensed under the Creative Commons license applied to text content and some other images posted to the wikiHow website. This image may not be used by other entities without the express written consent of wikiHow, Inc.<br>\n<\/p><p><br \/>\n<\/p><\/div>"}
    Use sturdy tape, like electrical tape , and wrap it around the ends of each strand of the ropes once or twice. [18] This prevents your rope from fraying while working on it.
    • Or, seal the ends of synthetic rope by singing the fibers together with a lighter. Hold the flame to the very end of each strand for a few seconds until the fibers fuse together.
    • Also wrap the tape around the bases of the strands to prevent the ropes from unraveling any further.
  3. Watermark wikiHow to Splice Rope
    Holding a rope in each hand, position them so that the places where the strands join on each rope are face-to-face, with the strands fanned-out and alternating—a strand from rope A, then from rope B, then from A, etc. [19]
    • Imagine the ropes are two octopi kissing, with their tentacles hugging each other.
  4. Watermark wikiHow to Splice Rope
    Take a strand from the left rope in your hand. Gently loosen the right rope by twisting it against its rotation. Feed the strand from the left rope over the first loosened strand in the right rope’s body, then under and through the very next strand. [20]
    • Pull the strand all the way through so that the ropes are secured together.
  5. Watermark wikiHow to Splice Rope
    Just as you tucked the first strand, tuck the other 2 strands from the left rope over then under and through the loosened strands of the right rope. [21]
  6. Watermark wikiHow to Splice Rope
    Now, repeat the process with the strands of the right rope, tucking them one at a time over, under, and through the loosened body strands of the left rope. [22]
    • Now every strand of either rope has been tucked into the body of the other, joining them together.
  7. Watermark wikiHow to Splice Rope
    Return to the strands of the left rope and tuck each strand 3 more times into the body of the right rope, then tuck each strand of the right rope into the body of the left, alternating to keep the tension even. [23]
    • Work one tuck at a time, moving to the next strand after each tuck, and cycling through each of the 3, three times
    • Tuck the strands this way until they’re too short to tuck any further, then pull on the ends to tighten them.
  8. Watermark wikiHow to Splice Rope
    Or, roll them underfoot. This tightens the spliced rope and squeezes the strands together, ensuring they’re secure. After the rope is rolled, your splice is finished. [24]
    9. Advertisement

Expert Q&A

Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      • Use a fid, or a small, metal, pick-like tool to thread down through the strands of especially tight rope to loosen it.
        Thanks
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Video

      You Might Also Like

      How to
      Make Rope
      How to
      Make a Rope Harness
      How to
      Braid Rope
      How to
      Weave Rope Seats
      How to
      Store Rope
      How to Rope and Throw a Lasso
      How to
      Tie a Rope Halter
      How to
      Make a Rope Dart
      How to
      Stop Rope from Fraying
      How to
      Dye Jute Rope
      Advertisement

      References

      1. ↑ https://www.youtube.com/watch?v=7zV76GN-XBk&t=87s
      2. ↑ https://herreshoff.org/2020/08/splicing/
      3. ↑ https://herreshoff.org/2020/08/splicing/
      4. ↑ https://youtu.be/7zV76GN-XBk?si=XFY7UffHp-ZP6vBN&t=307
      5. ↑ https://youtu.be/7zV76GN-XBk?si=XFY7UffHp-ZP6vBN&t=307
      6. ↑ https://www.youtube.com/watch?v=7zV76GN-XBk&t=466s
      7. ↑ https://www.youtube.com/watch?v=44tKakR64rs&t=20s
      8. ↑ https://herreshoff.org/2020/08/splicing/
      9. ↑ https://www.youtube.com/watch?v=44tKakR64rs&t=63s
      1. ↑ https://www.youtube.com/watch?v=44tKakR64rs&t=78s
      2. ↑ https://www.youtube.com/watch?v=44tKakR64rs&t=89s
      3. ↑ https://youtu.be/44tKakR64rs?si=xM55qiWJD1_kpemo&t=105
      4. ↑ https://youtu.be/76xdhCx88yo?si=cxkRJySQNUNEN_Ax&t=137
      5. ↑ https://www.youtube.com/watch?v=44tKakR64rs&t=208s
      6. ↑ https://www.youtube.com/watch?v=44tKakR64rs&t=242s
      7. ↑ https://www.youtube.com/watch?v=76xdhCx88yo&t=232s
      8. ↑ https://www.barrowbells.org.uk/Training/RopeSplicing.pdf
      9. ↑ https://herreshoff.org/2020/08/splicing/
      10. ↑ https://www.barrowbells.org.uk/Training/RopeSplicing.pdf
      11. ↑ https://www.youtube.com/watch?v=jgR22SOhkFM&t=146s
      12. ↑ https://www.barrowbells.org.uk/Training/RopeSplicing.pdf
      13. ↑ https://www.barrowbells.org.uk/Training/RopeSplicing.pdf
      14. ↑ https://www.barrowbells.org.uk/Training/RopeSplicing.pdf
      15. ↑ https://www.barrowbells.org.uk/Training/RopeSplicing.pdf

      About This Article

      Article Summary X

      To splice rope, start by separating the end of the rope into 3 strands. Then, singe the ends of each strand with a lighter so they don't unravel, and wrap electrical tape or duct tape around the ends so they're easier to work with. Next, loosen the strands on a piece of rope that you want to splice the first rope to, and insert the strands through the loosened loops on the new piece of rope. Finally, continue to weave the strands through the loops until you've passed them through 5 times. To learn how to splice rope using a back splice, scroll down!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 194,619 times.

      Reader Success Stories

      • Bill Hallock

        Feb 7, 2017

        "Very clear, best tool to learn how to splice. Even I could do it!"
      Share your story
      If you buy through links on our site, we may earn a commission .

      Did this article help you?

      Advertisement