How to Start a Fire with Wet Wood

PDF download Download Article
PDF download Download Article

Fires are a staple of any campout, but unfortunately, rain can be too. How can you make a fire when everything is wet? With a good fire starter and some cleverly arranged logs, you can still make a fire that will last all night long. That’s why we’ve put together a straightforward guide to starting a fire with wet wood. If you don’t want to let a little rain keep you down, read on!

1

Collect pine needles and bark for tinder.

PDF download Download Article
  1. Search the area for dry pine needles, grass, moss, bark, wood chips, or wood shavings. [1] If they're all wet or you can’t find anything, use cotton balls, dryer lint, crumpled paper, or toilet paper, or similar materials you might have on hand. [2]
    • In wet conditions, add cooking oil or petroleum jelly to materials like cotton balls to make a DIY fire starter.
    • If you’re planning ahead, pack steel wool or magnesium shavings to include in your tinder. They burn hot and help dry out firewood in wet conditions. [3]
    • Pack or collect about 4 times as much tinder as you’d normally need to start a wet wood fire. [4]
    2. Advertisement
2

Grab an armful of small twigs for kindling.

PDF download Download Article
  1. Search dead trees (fallen or standing) for twigs you can snap off. Also look in the underbrush or for twigs and sticks that were shielded from the rain. [5] You’ll need about 4 times more kindling to start a wet wood fire than a regular one. [6]
    • If you can only find wet twigs, shave off the outer layers with a knife to get to the dry center. [7]
    • The ideal kindling sticks are thinner than the width of an adult finger and around 6 inches (15 cm) long.
    • If necessary, use a hatchet to split large logs open, revealing the dry wood inside. Then shave off dry pieces to use as kindling. [8]
3

Split large logs open to expose dry wood (if you can).

PDF download Download Article
  1. Use a hatchet or ax to break your wet firewood into smaller pieces, then make several cuts into the sides of the wood. The cuts expose even more dry wood, plus they create more surface area that can catch fire. [9]
    • In a pinch, lay a knife perpendicular to the log you want to split and “baton” it (tap the knife with a sturdy log) through the log to split it. [10]
    2. Advertisement
4

Make a small platform with logs or rocks.

PDF download Download Article
  1. Fire pits are great for safety, but they tend to collect water when it rains. Clear any wet debris out of the pit and fill it with logs or rocks to create a small mound or platform. This will allow the ground to dry out without extinguishing your fire. [11]
    • The added height also increases air flow to your fire, which is essential for starting one with wet wood.
    • If you build your platform with logs, they will eventually dry out and be able to burn too.
5

Put tinder and kindling in the middle of the platform.

PDF download Download Article
  1. Arrange the kindling sticks so they’re leaning against each other in a cone or teepee shape around the tinder. [12] Turn the kindling sticks so the driest side of them is facing inward toward the tinder. [13]
    • The teepee shape helps you build your fire upward, away from the wet ground, while still allowing ample air flow.
    2. Advertisement
6

Arrange the largest logs in a criss-cross pattern.

PDF download Download Article
  1. Turn them so the driest side is facing the center. Make sure to leave about 1 inch (2.5 cm) of space between the logs and the kindling for air flow. [14]
    • The top side of the logs should be level with or slightly taller than the top of the kindling teepee. If they’re not, stack another log on top to achieve that height.
    • Stack 2 more logs on top of the base layer. Lay them perpendicular to the bottom logs to create a criss-cross or hashtag shape. [15]
7

Use matches or a lighter to light the tinder .

PDF download Download Article
  1. Once the kindling is lit, the heat will start to dry out the fuel logs as well. Keep adding tinder and kindling to the flames until the fuel logs catch on fire too. [16]
    • The driest logs on the bottom will burn first, which will help dry out the wetter logs on top. [17]
    • If it’s windy, make a shield with a stack of wet logs. This keeps the heat from blowing out of the fire and offers additional protection from the elements. [18]
    2. Advertisement
8

Add logs in a criss-cross pattern to feed the fire.

PDF download Download Article
  1. Add logs to the fire sooner than you think you need to since they will take a while to fully dry out and light. [19]
    • Add more layers gradually rather than all at once. This will ensure you don’t accidentally smother the fire.
    • Enjoy your fire! As long as you continue to dry out your wood ahead of time, you’ll be able to keep your fire bright, hot, and healthy all night long.
9

Rearrange the burnt logs to maintain airflow.

PDF download Download Article
  1. Use a long stick or tongs to shift the burnt wood around to make gaps and passages for air. Once the air is flowing, the smoking will stop. [20]
    2. Advertisement
10

Put out the fire completely when you're done.

PDF download Download Article
  1. If you don’t have water, use a stick or tongs to stir sand and dirt into the fire bed until the fire’s totally extinguished. [21] Always put out your campfire before going to bed each night.
    • Feel the temperature around the coals, embers, or burnt wood with your hands. If any of it is too hot to touch, then the fire is too hot to leave unattended. [22]

Expert Q&A

Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      • Even if it appears dry, try not to burn live (green) wood since it’s wetter inside than dead wood. It’s hard to light, smokes a lot, goes out frequently, and smolders at low temperatures. [23]
        Thanks
        Helpful 2 Not Helpful 0
      • A great fire starter is essential for starting a wet wood fire. Plan ahead and pack a firestarter stick or some magnesium to bolster your tinder and kindling if you can.
        Thanks
        Helpful 1 Not Helpful 0
      • For maximum safety, always try to build your fire in a fire ring or fire pit. This keeps the fire from accidentally spreading across a wider area.
        Thanks
        Helpful 1 Not Helpful 1
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      You Might Also Like

      9 Quick and Easy Ways to Start a Fire by Yourself
      How to
      Make Colored Fire
      How to
      Light a Fire in a Fireplace
      A Step-by-Step Guide for Successfully Making a Fire
      How to
      Start a Fire with Sticks
      How to
      Identify Flint
      How to
      Start a Bonfire
      How to
      Make Briquettes
      How to
      Start a Fire With Just a Magnifying Glass
      How to
      Light a Gas Fireplace
      How to
      Start a Fire With Different Types of Kindling
      How to
      Create a Strong Burning Charcoal Fire
      How to
      Light a Fire
      How to
      Use a Flint Stick
      Advertisement

      References

      1. ↑ https://www.survivaljunkies.com/building-a-fire-with-wet-wood/
      2. ↑ https://www.survivalworld.com/fire/start-a-fire-with-wet-wood/
      3. ↑ https://www.theweekendnomad.com/how-to/how-to-start-a-fire-with-wet-wood
      4. ↑ https://www.survivalworld.com/fire/start-a-fire-with-wet-wood/
      5. ↑ https://www.survivalworld.com/fire/start-a-fire-with-wet-wood/
      6. ↑ https://www.survivalworld.com/fire/start-a-fire-with-wet-wood/
      7. ↑ https://www.survivaljunkies.com/building-a-fire-with-wet-wood/
      8. ↑ https://upgradecamping.com/how-to-start-a-campfire-with-wet-wood/
      9. ↑ https://www.theweekendnomad.com/how-to/how-to-start-a-fire-with-wet-wood
      1. ↑ https://www.knifemanual.com/how-to-baton-wood-with-a-knife/#How_to_Baton_Wood_the_Correct_Way
      2. ↑ https://www.survivalworld.com/fire/start-a-fire-with-wet-wood/
      3. ↑ https://www.survivaljunkies.com/building-a-fire-with-wet-wood/
      4. ↑ https://upgradecamping.com/how-to-start-a-campfire-with-wet-wood/
      5. ↑ https://upgradecamping.com/how-to-start-a-campfire-with-wet-wood/
      6. ↑ https://www.survivaljunkies.com/building-a-fire-with-wet-wood/
      7. ↑ https://upgradecamping.com/how-to-start-a-campfire-with-wet-wood/
      8. ↑ https://www.survivalworld.com/fire/start-a-fire-with-wet-wood/
      9. ↑ https://www.theweekendnomad.com/how-to/how-to-start-a-fire-with-wet-wood
      10. ↑ https://upgradecamping.com/how-to-start-a-campfire-with-wet-wood/
      11. ↑ https://upgradecamping.com/how-to-start-a-campfire-with-wet-wood/
      12. ↑ https://www.nps.gov/articles/campfires.htm
      13. ↑ https://www.fs.usda.gov/detail/okawen/alerts-notices/?cid=fsbdev3_053601
      14. ↑ https://thehikingauthority.com/how-can-i-light-a-fire-with-wet-wood/

      About This Article

      Thanks to all authors for creating a page that has been read 31,066 times.
      If you buy through links on our site, we may earn a commission .

      Did this article help you?

      Advertisement