How to Stretch Steel Toe Boots

Download Article

Co-authored by Trent Potter

Last Updated: April 23, 2023 References

Download Article

Play Video

|

Q&A

Instead of breaking in steel toe boots by wearing them and getting painful blisters in the process, you might want to stretch them out before you wear them. Luckily, there are some easy techniques that you can use to stretch your boots up to a half size larger. Try using a broomstick for a quick and inexpensive way to stretch your boots. If you have more time, you might want to try freezing your boots with bags of water in the toes or heating the boots with a blow dryer if they’re made from leather . You can also use a 2-way shoe stretcher to widen and lengthen your steel toe boots.

Method 1

Method 1 of 4:

Using a Broomstick

Download Article

1
Apply leather conditioner if the boots are made from leather. Pour 1 US tbsp (15 mL) of leather conditioner onto a clean, dry rag. Then, begin rubbing the leather conditioner all over the outside of the boots. Use circular motions to cover the entire boot.
- This is optional, but it’s helpful if the boots are made from leather. Leather conditioner can help to soften and protect the leather and may also make it easier to stretch the boots. ^{[1]
  X
  Expert Source
  
  Trent Potter
  Shoe Care & Repair Specialist
  
  Expert Interview. 22 April 2021.}
2
Insert the end of a broomstick through the opening in the boot. Remove the stick from a broom by turning the broom attachment counterclockwise. Hold the stick about 1/3 of the way from the top while the bottom of the stick rests on the ground. Then, insert the top of the stick through the opening in your boot. ^{[2]
X
Research source}
- A mop or shovel handle will also work for this. If using a shovel or mop, you won’t need to remove the attachment. It’s only necessary to do this with a broom since broom bristles are not very sturdy when you press them against the ground.
- Do this outside while standing on grass or inside on a carpeted area. This will make it less likely that the broomstick will slip.
Warning : Avoid doing this on slippery surfaces or surfaces that might be damaged by the broomstick pressing against them, such as linoleum, hardwood, and laminate flooring.

Advertisement
3
Press downwards on the boot to stretch it. Push hard enough on the boot so that you can see the end of the outline of the broomstick’s tip poking through the material all around the inside of the boot. Hold the broom in each position for 10-20 seconds at a time. Although the broom handle cannot poke through the steel toe, it can stretch the areas around it. Make sure to focus on any areas of the boot that feel tight when you wear them.
- Switch to the other boot after you finish stretching the first one.
- It may take several minutes to stretch each of the boots all over.
4
Bend the sole as you stretch the boot material to break in the boots even more. Bend the toe and heel of the boots back and forth to stretch them. Hold the sole in the stretched position for 10-20 seconds at a time. This will help to make the soles of the boot more flexible and comfortable.
- Repeat this for each of the boots.
Try on the steel toe boots after you finish stretching them to see if they feel more comfortable. If there are still some tight areas, repeat the process to stretch them out more. ^{[3]
X
Research source}

Method 2

Method 2 of 4:

Freezing the Boots

Download Article

1
Fill 2 plastic quart-sized bags with water and seal them. Pour enough water into each of the bags to fill them up halfway or more to fill in the toe sections of the boots. Push the air out and then seal the bags. Hold them upside down over a sink for a few seconds to ensure that there are no leaks. ^{[4]
X
Research source}
- If possible, opt for freezer-safe bags. These will be less likely to leak.
- You can use gallon-sized bags if you don’t have quart-sized bags. Adjust the water level so that it will fill out the toes of the boots.
Use your hand to gently push the bags into the toes of the boots. Then, tap the toes against a hard surface a few times to get the bags all the way down into them. This will help to ensure that the boots stretch in the toe area as the water freezes and expands. ^{[5]
X
Research source}
3
Place the boots in your freezer overnight with the heels propped up. Place a book or piece of wood under each of the heels. This will help keep the water filled bag in the toes of the boots. It will take a few hours for the water to freeze, but it’s best to give the boots 8 hours to be sure. ^{[6]
X
Research source}
- If the boots are dirty, place them into a plastic grocery bag before putting them in your freezer. This will help to prevent any dirt or debris from getting on your frozen foods.
Tip : You could also place the boots outside when the temperature will fall below 32 °F (0 °C). This is cold enough for the water to freeze and you won’t need to take up freezer space to do it.
4
Take the boots out of the freezer and thaw them for 20 minutes. Place the boots on a towel or rug on the floor to thaw. Make sure that you do this indoors or someplace where the temperature is warm. Place the boots near a radiator or heating vent to speed the process even more. ^{[7]
X
Research source}
- Don’t wait for the ice to thaw completely. The ice only needs to thaw enough to easily remove the bags from the toes of the boots.
5
Remove the bags and repeat the process to stretch the boots more. Take the ice filled bags out of the boots when they have thawed enough to get them out. Then, try on the boots to see how they fit. If the boots still feel snug, you can repeat the process. Each time you do this the boots will stretch a little more. ^{[8]
X
Research source}
- If the boots are still quite snug, you may need to repeat the process 2-3 more times to achieve the desired size.
- This method works well for most types of boots, like rubber boots , leather boots, etc.

Method 3

Method 3 of 4:

Heating Leather Boots

Download Article

1
Put on 2 pairs of thick socks and then put on your boots. The heat from the dryer will penetrate the leather, which can burn your feet. To protect them, put on 2 pairs of thick socks. This will also help to stretch the leather as you warm it up with the blow dryer. ^{[9]
X
Research source}
- A single pair of very thick wool socks may also be enough to protect your feet from the heat and break in the leather. ^{[10]
  X
  Expert Source
  
  Trent Potter
  Shoe Care & Repair Specialist
  
  Expert Interview. 22 April 2021.}
Warning : Do not use this method on non-leather boots. The heat from a blow dryer may damage synthetic materials, such as vinyl and pleather.
2
Hover your blow dryer over the tight areas of the boots for 30 seconds. Turn the dryer to medium heat, or use the low setting if your dryer doesn’t have a medium setting. Then, hold the nozzle of the dryer about 3 in (7.6 cm) from the leather. Hover it over any tight spots on the boots for 30 seconds, and then move the heat to a new area. ^{[11]
X
Research source}
- Repeat this until the boots feel comfortable.
- Walk around in your boots to help break them in faster. ^{[12]
  X
  Expert Source
  
  Trent Potter
  Shoe Care & Repair Specialist
  
  Expert Interview. 22 April 2021.}
3
Apply a leather conditioner to the boots after you’re finished. Heat may cause the leather to become dry, so make sure to follow up the heat treatment by applying leather conditioner to the outside of the boots. Apply roughly 1 US tbsp (15 mL) of leather conditioner to a clean, dry rag. Then, rub the leather conditioner all over the outside of the boot using circular motions. Repeat this for the second boot. ^{[13]
X
Research source}
- Keep in mind that this is optional, but it is recommended to protect the leather and the conditioner may also help to soften the leather and allow it to stretch even more.

Method 4

Method 4 of 4:

Using a 2-Way Shoe Stretcher

Download Article

1
Apply leather conditioner if the boots are made from leather. Pour about 1 US tbsp (15 mL) of leather conditioner onto a clean, dry rag. Then, begin rubbing the leather conditioner all over the outside of the boot. Use circular motions to cover the entire boot, and then repeat this for the other one.
- If your boots are leather, this is helpful. Leather conditioner softens and protects leather and it may also make it easier to stretch the boots.
Make sure that you get a 2-way stretcher to ensure that it will widen the boots. Otherwise it may only stretch them lengthwise. This will make the stretcher smaller. Keep turning the handles until the stretcher is small enough to easily fit into the boot. ^{[14]
X
Research source}

Tip : You could also insert bunion plugs into the holes in the stretcher at this time if you suffer from bunions. Not all stretchers include them, but if yours does it can be a helpful way to stretch the boots in targeted areas.
3
Insert the stretcher into the boots and adjust the length and width. Turn the lengthening wheel until the stretcher is snug in the boot, and do the same for the other stretcher in the other boot. Then, adjust the width in the same way. Once the stretchers are snug in the boots, turn the lengthening and the widening wheels on each stretcher 3 more times. This will help to ensure that the boot is getting a good stretch. ^{[15]
X
Research source}
- Even if you don’t need the boot to be longer, lengthening it along with widening it will help to create even more width.
4
Leave the stretcher in place for 24 hours or longer. Don’t try to remove the stretcher right away even if it appears to be the desired size. A shoe stretcher exerts a lot of pressure on your boot, but removing the stretcher too soon can cause the material to snap right back to its original size. ^{[16]
X
Research source}
- The longer you can wait to remove the stretcher, the better the chances are that the material will not snap back to its original size.
If the boots are still too tight, repeat the process to stretch them even more. You may need to repeat the process 2-3 more times to get the desired size if the boots are very tight. ^{[17]
X
Research source}

Expert Q&A

Search

Add New Question

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Video

Read Video Transcript

Tips

Always try on boots before you buy them to reduce the chances of getting tight-fitting boots. If you order your boots online, consult the size chart for the boots to determine if they run small or large.

Thanks
Helpful 1 Not Helpful 0
Try using a shoe stretching spray to enhance these strategies.

Thanks
Helpful 1 Not Helpful 0
Your boots will naturally stretch over time if you wear them regularly, but this can result in blisters and painful feet if the boots are too tight.

Thanks
Helpful 1 Not Helpful 2

Submit a Tip

All tip submissions are carefully reviewed before being published

Name

Please provide your name and last initial

Submit

Thanks for submitting a tip for review!