PDF download Download Article PDF download Download Article

Goats’ hooves need to be trimmed periodically to prevent infection and keep the animals comfortable. It can be stressful to trim your goat's feet if you've never done it before, but the process is fairly straightforward. Take your time, be gentle, and avoid trimming into the pink portion of the hoof.

Method 1
Method 1 of 3:

Getting Your Goat Ready

PDF download Download Article
  1. Before you begin the trimming process, make sure you have all your materials ready. Goats may dislike having their hooves trimmed. It may be difficult to grab brushes and clippers if your goat is agitated.
    • You will need a brush to dust off the goat's foot before trimming. You will also need a rasp to flatten out the hooves so they're level to the ground. [1]
    • You will need gloves to handle the goat's hooves. Goats feet can get messy. [2]
    • You will need two different types of clippers: hoof shears and a hoof knife. Both should be sharpened. [3]
    • While optional, it's a good idea to have blood stop powder. If you accidentally cut too deep, your goat's hoof may bleed slightly and require treatment. [4]
  2. It's much easier to trim a goat's hooves when they're soft. If possible, trim your goat's hooves after a rain or snow fall. Rain and snow naturally soften a goat's hooves. If you live in an area where rain or snow is unlikely, try dampening some grass with a hose. Allow your goats to play in this portion of the yard. [5]
    Advertisement
  3. To begin the trimming process, you will first need to restrain your goat. How you choose to restrain your goat depends on his temperament.
    • You can place your goat on a milking stand if he's generally docile and unlikely to kick or fall off. This makes it easier to reach your goat's hooves. [6]
    • If your goat is fidgety or you don’t have a milking stand, tie your goat to a post or fence. It may be helpful to have someone hold your goat. [7]
  4. Once your goat is adequately restrained, you should clean his hooves. It can be hard to tell where to trim if your goat's hooves are covered in dirt and grime.
    • Use your brush to dust any dirt off the exterior of the hooves. Any manure, dirt, or grime should be removed regularly.
    • Next, lift each hoof up and pick out any rocks, dirt, and mud trapped inside the hoof. It's vital to remove such debris as such materials can obscure your vision.
  5. Advertisement
Method 2
Method 2 of 3:

Trimming the Hoof

PDF download Download Article
  1. Once you've cleaned your goat's hooves, you can begin the trimming process. Start with the front of the nail, using your hoof shears to trim. Goats nails become overgrown easily when they're kept domestically. In the wild, their feet would get worn down by climbing and jumping.
    • Clip at the tip of the front nails. Keep clipping until you see a white surface emerge. Do not clip further than this.
    • If you clip into a pink surface, this can make your goat bleed. [8]
    • Try to clip in a straight line. You want your goat's hooves to be level to the ground. [9]
  2. Once you've clipped the front nails, move on to the sides of the nails. Keep using the hoof shears. Goats have two toes on each foot, as well as two heels on each toe. Clip on the sides around these toes, once again clipping until you reach the white part of the hoof. Clip around the heel as well. [10]
  3. Remember, you want your goat's hooves to be level with the ground. This helps your goat walk smoothly. Now, you'll be using your rasp or knife to level the bottom of the hoof.
    • If you use a knife, move from the toe to the heel. If you use a rasp, move from the heel to the toe. [11]
    • Use multiple strokes, trimming off a thin layer with each stroke. Keep trimming until the goat's hooves are flat and level with the ground. [12]
    • Stop if you’re trimming and you start to see pink.
  4. Advertisement
Method 3
Method 3 of 3:

Addressing Problems

PDF download Download Article
  1. If you move slowly and avoid trimming into the pink, your goat should not bleed during the trimming process. However, everyone slips up on occasion. If you do end up causing droplets of blood to appear, applying blood stop powder can help correct the problem. You can sprinkle some powder on the infected area to help stop the bleeding. [13]
    • Read the instructions on your packet before use to make sure there are no warnings or special considerations relevant to your goat's issues.
  2. Try installing a walk through bath in your goat's pen. This can allow your goat to wet his feet regularly, preventing a buildup of bacteria that can cause a condition known as foot rot. Foot rot eats away at a goat's hooves and must be treated with trimming and antibiotics. [14]
    • You can add copper or zinc sulfite to your foot bath. These chemicals help fight bacteria that can cause foot rot. [15]
  3. A good way to prevent foot rot and infections is trimming your goat's feet regularly. You should seek to trim at least four times a year. However, it does depend on the individual animal. Some goat's feet may grow more quickly. Keep an eye your goat's feet and if you notice the hooves look a bit overgrown, schedule a trimming session. [16]
    • In the wild, goat's feet are worn down by rocks and terrain. Providing a large rock for your goat to play on can cut back on the need for trimming. [17]
  4. Advertisement

Community Q&A

Search
Add New Question
  • Question
    How do I trim overgrown heels?
    Community Answer
    Just as you would normally. Keep trimming until you hit the white. Make sure that you clean ALL of the dirt before you trim.
  • Question
    The article says to stop when I get to the white piece, but I will have barely trimmed anything at all. In the video, they trimmed until the hoof was level, well past the beginning of the white. Which is safe for my goat?
    Karin
    Top Answerer
    The safest is what the video recommends. The basic rule of thumb is that you know when you're getting close to the blood supply or the quick when you see the hoof colour, as you trim, turning to a slight pink.
Ask a Question
      Advertisement

      Video

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!

      Warnings

      • Do not cut anymore if you see pink flesh. This will lead to excessive bleeding and possibly injure your goat.
      • If you see anything unusual when trimming, or are unsure about any parts of the trimming process, consult a professional livestock veterinarian. While it's fairly easy to trim a goat's hooves on your own, you should seek professional advice in the event you're unsure. You do not want to risk injuring your goat.
      Advertisement

      About This Article

      Article Summary X

      Before you trim a goat's hooves, make sure to restrain your goat by tying it to a fence or putting it in a milking stand. Once your goat is restrained, clean the outside of its hooves with a brush and gently remove any debris or rocks from between its toes. Then, use your hoof shears to begin trimming at the toe. Your goal is to make the hoof level, so after you've trimmed the toe, file the remaining part of the hoof until you see white. However, stop as soon as you see white so you do not injure the goat. For tips on what to do if you encounter problems while trimming, read on!

      Did this summary help you?
      Thanks to all authors for creating a page that has been read 73,623 times.

      Reader Success Stories

      • Tom Colvin

        Jul 7, 2019

        "I see I need to do more toe trimming than I thought. The videos really helped me. I have a new goat that has really ..." more
      Share your story

      Did this article help you?

      Advertisement